AWS Security Token Service (STS)

Since Camel 3.5

Only producer is supported

The AWS2 STS component supports assumeRole operation. AWS STS.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon STS. More information is available at Amazon STS.

The AWS2 STS component works on the aws-global region, and it has aws-global as the default region.

URI Format

aws2-sts://label[?options]

You can append query options to the URI in the following format:

?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The AWS Security Token Service (STS) component supports 18 options, which are listed below.

Name Description Default Type

configuration (producer)

Component configuration.

STS2Configuration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

Required The operation to perform.

Enum values:

  • assumeRole

  • getSessionToken

  • getFederationToken

assumeRole

STS2Operations

overrideEndpoint (producer)

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

region (producer)

The region in which the STS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

Enum values:

  • ap-south-2

  • ap-south-1

  • eu-south-1

  • eu-south-2

  • us-gov-east-1

  • me-central-1

  • il-central-1

  • ca-central-1

  • eu-central-1

  • us-iso-west-1

  • eu-central-2

  • us-west-1

  • us-west-2

  • af-south-1

  • eu-north-1

  • eu-west-3

  • eu-west-2

  • eu-west-1

  • ap-northeast-3

  • ap-northeast-2

  • ap-northeast-1

  • me-south-1

  • sa-east-1

  • ap-east-1

  • cn-north-1

  • us-gov-west-1

  • ap-southeast-1

  • ap-southeast-2

  • us-iso-east-1

  • ap-southeast-3

  • ap-southeast-4

  • us-east-1

  • us-east-2

  • cn-northwest-1

  • us-isob-east-1

  • aws-global

  • aws-cn-global

  • aws-us-gov-global

  • aws-iso-global

  • aws-iso-b-global

aws-global

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

stsClient (advanced)

Autowired To use an existing configured AWS STS client.

StsClient

proxyHost (proxy)

To define a proxy host when instantiating the STS client.

String

proxyPort (proxy)

To define a proxy port when instantiating the STS client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the STS client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider, this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the STS client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (security)

Set whether the STS client should expect to load credentials through a profile credentials provider.

false

boolean

Endpoint Options

The AWS Security Token Service (STS) endpoint is configured using URI syntax:

aws2-sts:label

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

label (producer)

Required Logical name.

String

Query Parameters (16 parameters)

Name Description Default Type

operation (producer)

Required The operation to perform.

Enum values:

  • assumeRole

  • getSessionToken

  • getFederationToken

assumeRole

STS2Operations

overrideEndpoint (producer)

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

region (producer)

The region in which the STS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

Enum values:

  • ap-south-2

  • ap-south-1

  • eu-south-1

  • eu-south-2

  • us-gov-east-1

  • me-central-1

  • il-central-1

  • ca-central-1

  • eu-central-1

  • us-iso-west-1

  • eu-central-2

  • us-west-1

  • us-west-2

  • af-south-1

  • eu-north-1

  • eu-west-3

  • eu-west-2

  • eu-west-1

  • ap-northeast-3

  • ap-northeast-2

  • ap-northeast-1

  • me-south-1

  • sa-east-1

  • ap-east-1

  • cn-north-1

  • us-gov-west-1

  • ap-southeast-1

  • ap-southeast-2

  • us-iso-east-1

  • ap-southeast-3

  • ap-southeast-4

  • us-east-1

  • us-east-2

  • cn-northwest-1

  • us-isob-east-1

  • aws-global

  • aws-cn-global

  • aws-us-gov-global

  • aws-iso-global

  • aws-iso-b-global

aws-global

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

stsClient (advanced)

Autowired To use an existing configured AWS STS client.

StsClient

proxyHost (proxy)

To define a proxy host when instantiating the STS client.

String

proxyPort (proxy)

To define a proxy port when instantiating the STS client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the STS client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider, this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the STS client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (security)

Set whether the STS client should expect to load credentials through a profile credentials provider.

false

boolean

Required STS component options

You have to provide the amazonSTSClient in the Registry or your accessKey and secretKey to access the Amazon STS service.

Message Headers

The AWS Security Token Service (STS) component supports 5 message header(s), which is/are listed below:

Name Description Default Type

CamelAwsStsOperation (producer)

Constant: OPERATION

The operation we want to perform.

String

CamelAwsStsRoleArn (producer)

Constant: ROLE_ARN

The Amazon Resource Name (ARN) of the role to assume.

String

CamelAwsStsRoleSessionName (producer)

Constant: ROLE_SESSION_NAME

An identifier for the assumed role session.

String

CamelAwsStsFederatedName (producer)

Constant: FEDERATED_NAME

The name of the federated user.

String

CamelAwsStsAssumeRoleDurationSeconds (producer)

Constant: ASSUME_ROLE_DURATION_SECONDS

The duration, in seconds, of the role session. It could go from 900 seconds, to 1 to 12 hours (dependent on administrator settings. The default if not specified is 3600 seconds.

Integer

Usage

Static credentials, Default Credential Provider and Profile Credentials Provider

You have the possibility of avoiding the usage of explicit static credentials by specifying the useDefaultCredentialsProvider option and set it to true.

The order of evaluation for Default Credentials Provider is the following:

  • Java system properties - aws.accessKeyId and aws.secretKey.

  • Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

  • Web Identity Token from AWS STS.

  • The shared credentials and config files.

  • Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.

  • Amazon EC2 Instance profile credentials.

You have also the possibility of using Profile Credentials Provider, by specifying the useProfileCredentialsProvider option to true and profileCredentialsName to the profile name.

Only one of static, default and profile credentials could be used at the same time.

For more information about this you can look at AWS credentials documentation

STS Producer operations

Camel-AWS STS component provides the following operation on the producer side:

  • assumeRole

  • getSessionToken

  • getFederationToken

Examples

Producer Examples

  • assumeRole: this operation will make an AWS user assume a different role temporary

from("direct:assumeRole")
    .setHeader(STS2Constants.ROLE_ARN, constant("arn:123"))
    .setHeader(STS2Constants.ROLE_SESSION_NAME, constant("groot"))
    .to("aws2-sts://test?stsClient=#amazonSTSClient&operation=assumeRole")

  • getSessionToken: this operation will return a temporary session token

from("direct:getSessionToken")
    .to("aws2-sts://test?stsClient=#amazonSTSClient&operation=getSessionToken")

  • getFederationToken: this operation will return a temporary federation token

from("direct:getFederationToken")
    .setHeader(STS2Constants.FEDERATED_NAME, constant("federation-account"))
    .to("aws2-sts://test?stsClient=#amazonSTSClient&operation=getSessionToken")

Using a POJO as body

Sometimes building an AWS Request can be complex because of multiple options. We introduce the possibility to use a POJO as the body. In AWS STS, as an example for Assume Role request, you can do something like:

from("direct:createUser")
     .setBody(AssumeRoleRequest.builder().roleArn("arn:123").roleSessionName("groot").build())
    .to("aws2-sts://test?stsClient=#amazonSTSClient&operation=assumeRole&pojoRequest=true")

In this way, you’ll pass the request directly without the need of passing headers and options specifically related to this operation.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws2-sts</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws2-sts with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws2-sts-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 19 options, which are listed below.

Name Description Default Type

camel.component.aws2-sts.access-key

Amazon AWS Access Key.

String

camel.component.aws2-sts.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-sts.configuration

Component configuration. The option is a org.apache.camel.component.aws2.sts.STS2Configuration type.

STS2Configuration

camel.component.aws2-sts.enabled

Whether to enable auto configuration of the aws2-sts component. This is enabled by default.

Boolean

camel.component.aws2-sts.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-sts.operation

The operation to perform.

assumerole

STS2Operations

camel.component.aws2-sts.override-endpoint

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

Boolean

camel.component.aws2-sts.pojo-request

If we want to use a POJO request as body or not.

false

Boolean

camel.component.aws2-sts.profile-credentials-name

If using a profile credentials provider, this parameter will set the profile name.

String

camel.component.aws2-sts.proxy-host

To define a proxy host when instantiating the STS client.

String

camel.component.aws2-sts.proxy-port

To define a proxy port when instantiating the STS client.

Integer

camel.component.aws2-sts.proxy-protocol

To define a proxy protocol when instantiating the STS client.

https

Protocol

camel.component.aws2-sts.region

The region in which the STS client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

aws-global

String

camel.component.aws2-sts.secret-key

Amazon AWS Secret Key.

String

camel.component.aws2-sts.sts-client

To use an existing configured AWS STS client. The option is a software.amazon.awssdk.services.sts.StsClient type.

StsClient

camel.component.aws2-sts.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws2-sts.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws2-sts.use-default-credentials-provider

Set whether the STS client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws2-sts.use-profile-credentials-provider

Set whether the STS client should expect to load credentials through a profile credentials provider.

false

Boolean
Back to top