Bean Validator

Since Camel 2.3

Only producer is supported

The Validator component performs bean validation of the message body using the Java Bean Validation API (JSR 303). Camel uses the reference implementation, which is Hibernate Validator.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-bean-validator</artifactId>
    <version>x.y.z</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

bean-validator:label[?options]

Where label is an arbitrary text value describing the endpoint. You can append query options to the URI in the following format: ?option=value&option=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Bean Validator component supports 8 options, which are listed below.

Name Description Default Type

ignoreXmlConfiguration (producer)

Whether to ignore data from the META-INF/validation.xml file.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

constraintValidatorFactory (advanced)

To use a custom ConstraintValidatorFactory.

ConstraintValidatorFactory

messageInterpolator (advanced)

To use a custom MessageInterpolator.

MessageInterpolator

traversableResolver (advanced)

To use a custom TraversableResolver.

TraversableResolver

validationProviderResolver (advanced)

To use a a custom ValidationProviderResolver.

ValidationProviderResolver

validatorFactory (advanced)

Autowired To use a custom ValidatorFactory.

ValidatorFactory

Endpoint Options

The Bean Validator endpoint is configured using URI syntax:

bean-validator:label

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

label (producer)

Required Where label is an arbitrary text value describing the endpoint.

String

Query Parameters (8 parameters)

Name Description Default Type

group (producer)

To use a custom validation group.

jakarta.validation.groups.Default

String

ignoreXmlConfiguration (producer)

Whether to ignore data from the META-INF/validation.xml file.

false

boolean

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

constraintValidatorFactory (advanced)

To use a custom ConstraintValidatorFactory.

ConstraintValidatorFactory

messageInterpolator (advanced)

To use a custom MessageInterpolator.

MessageInterpolator

traversableResolver (advanced)

To use a custom TraversableResolver.

TraversableResolver

validationProviderResolver (advanced)

To use a a custom ValidationProviderResolver.

ValidationProviderResolver

validatorFactory (advanced)

To use a custom ValidatorFactory.

ValidatorFactory

OSGi deployment

To use Hibernate Validator in the OSGi environment use dedicated ValidationProviderResolver implementation, just as org.apache.camel.component.bean.validator.HibernateValidationProviderResolver. The snippet below demonstrates this approach. You can also use HibernateValidationProviderResolver.

Using HibernateValidationProviderResolver

  • Java

  • XML

from("direct:test").
  to("bean-validator://ValidationProviderResolverTest?validationProviderResolver=#myValidationProviderResolver");
<bean id="myValidationProviderResolver" class="org.apache.camel.component.bean.validator.HibernateValidationProviderResolver"/>

If no custom ValidationProviderResolver is defined and the validator component has been deployed into the OSGi environment, the HibernateValidationProviderResolver will be automatically used.

Example

Assumed we have a java bean with the following annotations

Car.java

public class Car {

    @NotNull
    private String manufacturer;

    @NotNull
    @Size(min = 5, max = 14, groups = OptionalChecks.class)
    private String licensePlate;

    // getter and setter
}

and an interface definition for our custom validation group

OptionalChecks.java

public interface OptionalChecks {
}

with the following Camel route, only the @NotNull constraints on the attributes manufacturer and licensePlate will be validated (Camel uses the default group jakarta.validation.groups.Default).

from("direct:start")
.to("bean-validator://x")
.to("mock:end")

If you want to check the constraints from the group OptionalChecks, you have to define the route like this

from("direct:start")
.to("bean-validator://x?group=OptionalChecks")
.to("mock:end")

If you want to check the constraints from both groups, you have to define a new interface first:

AllChecks.java

@GroupSequence({Default.class, OptionalChecks.class})
public interface AllChecks {
}

And then your route definition should look like this:

from("direct:start")
.to("bean-validator://x?group=AllChecks")
.to("mock:end")

And if you have to provide your own message interpolator, traversable resolver and constraint validator factory, you have to write a route like this:

  • Java

  • XML

<bean id="myMessageInterpolator" class="my.ConstraintValidatorFactory" />
<bean id="myTraversableResolver" class="my.TraversableResolver" />
<bean id="myConstraintValidatorFactory" class="my.ConstraintValidatorFactory" />
from("direct:start")
.to("bean-validator://x?group=AllChecks&messageInterpolator=#myMessageInterpolator
&traversableResolver=#myTraversableResolver&constraintValidatorFactory=#myConstraintValidatorFactory")
.to("mock:end")

It’s also possible to describe your constraints as XML and not as Java annotations. In this case, you have to provide the files META-INF/validation.xml and constraints-car.xml which could look like this:

  • validation.xml

  • constraints-car.xml

<validation-config
        xmlns="https://jakarta.ee/xml/ns/validation/configuration"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="https://jakarta.ee/xml/ns/validation/configuration https://jakarta.ee/xml/ns/validation/validation-configuration-3.0.xsd"
        version="3.0">

    <default-provider>org.hibernate.validator.HibernateValidator</default-provider>
    <message-interpolator>org.hibernate.validator.engine.ResourceBundleMessageInterpolator</message-interpolator>
    <traversable-resolver>org.hibernate.validator.engine.resolver.DefaultTraversableResolver</traversable-resolver>
    <constraint-validator-factory>org.hibernate.validator.engine.ConstraintValidatorFactoryImpl</constraint-validator-factory>
    <constraint-mapping>/constraints-car.xml</constraint-mapping>

</validation-config>
<constraint-mappings
        xmlns="https://jakarta.ee/xml/ns/validation/mapping"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="https://jakarta.ee/xml/ns/validation/mapping
            https://jakarta.ee/xml/ns/validation/validation-mapping-3.0.xsd"
        version="3.0">

    <default-package>org.apache.camel.component.bean.validator</default-package>

    <bean class="CarWithoutAnnotations" ignore-annotations="true">
        <field name="manufacturer">
            <constraint annotation="jakarta.validation.constraints.NotNull" />
        </field>

        <field name="licensePlate">
            <constraint annotation="jakarta.validation.constraints.NotNull" />

            <constraint annotation="jakarta.validation.constraints.Size">
                <groups>
                    <value>org.apache.camel.component.bean.validator.OptionalChecks</value>
                </groups>
                <element name="min">5</element>
                <element name="max">14</element>
            </constraint>
        </field>
    </bean>
</constraint-mappings>

Note that the body should include an instance of a class to validate.

<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
    http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">

    <camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
        <route>
            <from uri="direct:start"/>
            <to uri="bean-validator://x?group=org.apache.camel.component.bean.validator.OrderedChecks"/>
        </route>
    </camelContext>
</beans>

Spring Boot Auto-Configuration

When using bean-validator with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-bean-validator-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 9 options, which are listed below.

Name Description Default Type

camel.component.bean-validator.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.bean-validator.constraint-validator-factory

To use a custom ConstraintValidatorFactory. The option is a jakarta.validation.ConstraintValidatorFactory type.

ConstraintValidatorFactory

camel.component.bean-validator.enabled

Whether to enable auto configuration of the bean-validator component. This is enabled by default.

Boolean

camel.component.bean-validator.ignore-xml-configuration

Whether to ignore data from the META-INF/validation.xml file.

false

Boolean

camel.component.bean-validator.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.bean-validator.message-interpolator

To use a custom MessageInterpolator. The option is a jakarta.validation.MessageInterpolator type.

MessageInterpolator

camel.component.bean-validator.traversable-resolver

To use a custom TraversableResolver. The option is a jakarta.validation.TraversableResolver type.

TraversableResolver

camel.component.bean-validator.validation-provider-resolver

To use a a custom ValidationProviderResolver. The option is a jakarta.validation.ValidationProviderResolver type.

ValidationProviderResolver

camel.component.bean-validator.validator-factory

To use a custom ValidatorFactory. The option is a jakarta.validation.ValidatorFactory type.

ValidatorFactory