Test Main JUnit5

Since Camel 3.16

The camel-test-main-junit5 module is used for unit testing Camel launched in Standalone mode with Camel Main.

This module proposes two approaches to configure and launch Camel like a Camel Main application for testing purpose.

  • Legacy: This approach consists of extending the base class org.apache.camel.test.main.junit5.CamelMainTestSupport and overriding the appropriate methods to enable or disable a feature.

  • Annotation: This approach consists of annotating the test classes with org.apache.camel.test.main.junit5.CamelMainTest with the appropriate attributes to enable or disable a feature.

In the next section, for each use case both approaches are proposed with the labels legacy and annotation to differentiate them.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-test-main-junit5</artifactId>
    <scope>test</scope>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Specify a main class

Most of the time, a Camel Main application has a main class from which all the Camel related classes are found.

In practice, this is done simply by providing the main class of the application in the constructor of Camel Main like for example new Main(SomeApplication.class) where SomeApplication.class is the main class of the application.

Legacy

The same behavior can be simulated with CamelMainTestSupport by overriding the method getMainClass() to provide the main class of the application to test.

Annotation

The same behavior can be simulated with CamelMainTest by setting the attribute mainClass to provide the main class of the application to test.

Examples

In the next examples, the main class of the application to test is the class SomeMainClass.

  • Legacy

  • Annotation

class SomeTest extends CamelMainTestSupport {

    @Override
    protected Class<?> getMainClass() {
        return SomeMainClass.class;
    }

    // Rest of the test class
}
@CamelMainTest(mainClass = SomeMainClass.class)
class SomeTest {

    // Rest of the test class
}

Configure Camel as a Camel Main application

A Camel Main application has access to many specific configuration properties that are not available from the base class CamelTestSupport.

Legacy

The base class CamelMainTestSupport provides the method configure(MainConfigurationProperties configuration) that can be overridden to configure Camel for the test like a Camel Main application.

Annotation

The annotation Configure allows to mark a method with an arbitrary name and a parameter of type MainConfigurationProperties to be called to configure Camel for the test like a Camel Main application. Several methods in the test class and/or its parent classes can be annotated.

Examples

In the next examples, the test class SomeTest adds a configuration class and specifies the xml routes to include.

  • Legacy

  • Annotation

import org.apache.camel.main.MainConfigurationProperties;

class SomeTest extends CamelMainTestSupport {

    @Override
    protected void configure(MainConfigurationProperties configuration) {
        // Add a configuration class
        configuration.addConfiguration(SomeConfiguration.class);
        // Add all the XML routes
        configuration.withRoutesIncludePattern("routes/*.xml");
    }

    // Rest of the test class
}
import org.apache.camel.main.MainConfigurationProperties;
import org.apache.camel.test.main.junit5.Configure;

@CamelMainTest
class SomeTest {

    @Configure
    protected void configure(MainConfigurationProperties configuration) {
        // Add a configuration class
        configuration.addConfiguration(SomeConfiguration.class);
        // Add all the XML routes
        configuration.withRoutesIncludePattern("routes/*.xml");
    }

    // Rest of the test class
}

Configure a custom property placeholder location

By default, the property placeholder used is application.properties from the default package. There are several ways to configure the property placeholder locations, you can either provide the file name of the property placeholder or a list of locations.

A list of property placeholder locations

Legacy

The method getPropertyPlaceholderLocations() can be overridden to provide a comma separated list of locations.

Annotation

The attribute propertyPlaceholderLocations can be set to provide a list of locations.

The order in the list matters, especially in case of a property defined at several locations, the value of the property found in the first location where it is defined, is used.

Examples

In the next examples, the property placeholder locations configured are extra-application.properties and application.properties both available in the default package.

  • Legacy

  • Annotation

class SomeTest extends CamelMainTestSupport {

    @Override
    protected String getPropertyPlaceholderLocations() {
        return "classpath:extra-application.properties,classpath:application.properties";
    }

    // Rest of the test class
}
@CamelMainTest(propertyPlaceholderLocations = { "classpath:extra-application.properties", "classpath:application.properties" })
class SomeTest {

    // Rest of the test class
}

The file name of the property placeholder

For the sake of simplicity, in case you need only one property placeholder location.

Legacy

The method getPropertyPlaceholderFileName() can be overridden to provide the file name of the property placeholder.

Annotation

The attribute propertyPlaceholderFileName can be set to provide the file name of the property placeholder.

It can then infer the locations of the property placeholder as it assumes that it is located either in the same package as the test class or directly in the default package.

Examples

In the next examples, since the test class is com.somecompany.SomeTest and the file name of the property placeholder is custom-application.properties , the actual possible locations of the property placeholder are classpath:com/somecompany/custom-application.properties;optional=true,classpath:custom-application.properties;optional=true which means that for each property to find, it tries to get it first from the properties file of the same package if it exists and if it cannot be found, it tries to get it from the properties file with the same name but in the default package if it exists.

Since the properties files are declared as optional, no exception is raised if they are both absent.
  • Legacy

  • Annotation

package com.somecompany;

class SomeTest extends CamelMainTestSupport {

    @Override
    protected String getPropertyPlaceholderFileName() {
        return "custom-application.properties";
    }

    // Rest of the test class
}
package com.somecompany;

@CamelMainTest(propertyPlaceholderFileName = "custom-application.properties")
class SomeTest {

    // Rest of the test class
}

Replace an existing bean

In Camel Main, you have the opportunity to bind custom beans dynamically using the specific annotation @BindToRegistry which is very helpful but for testing purpose, you may need to replace the bean by a mock, or test implementation.

Legacy

To bind additional beans, you can still override the well known method bindToRegistry(Registry registry) but this method cannot be used to replace a bean created and bound automatically by Camel as it is called too early in the initialization process of Camel. To work around this problem, you can instead bind your beans by overriding the new method bindToRegistryAfterInjections(Registry registry) which is called after existing injections and automatic binding have been done.

Annotation

The annotation ReplaceInRegistry allows to mark a method or a field to replace an existing bean in the registry.

  • In the case of a field, the name and its type are used to identify the bean to replace, and the value of the field is the new value of the bean. The field can be in the test class or in a parent class.

  • In the case of a method, the name and its return type are used to identify the bean to replace, and the return value of the method is the new value of the bean. The method can be in the test class or in a parent class.

Examples

In the next examples, an instance of a custom bean of type CustomGreetings is used to replace the bean of type Greetings automatically bound by Camel with the name myGreetings.

  • Legacy

  • Annotation (field)

  • Annotation (method)

class SomeTest extends CamelMainTestSupport {

    @PropertyInject("name")
    String name;

    @Override
    protected void bindToRegistryAfterInjections(Registry registry) throws Exception {
        registry.bind("myGreetings", Greetings.class, new CustomGreetings(name));
    }

    // Rest of the test class
}
Using a field
import org.apache.camel.test.main.junit5.ReplaceInRegistry;

@CamelMainTest
class SomeTest {

    @ReplaceInRegistry
    Greetings myGreetings = new CustomGreetings("Willy"); (1)

    // Rest of the test class
}
1 We cannot rely on the value of property that is injected thanks to @PropertyInject like in the previous code snippet because the injection occurs after the instantiation of the test class, so it would be null.
Using a method
import org.apache.camel.test.main.junit5.ReplaceInRegistry;

@CamelMainTest
class SomeTest {

    @PropertyInject("name")
    String name;

    @ReplaceInRegistry
    Greetings myGreetings() {
        return new CustomGreetings(name);
    }

    // Rest of the test class
}

Override existing properties

Some properties are inherited from properties file like the application.properties and need to be overridden within the context of the test.

Legacy

The method useOverridePropertiesWithPropertiesComponent() can be overridden to provide an instance of type java.util.Properties that contains the properties to override.

Annotation

The attribute properties can be set to provide an array of String representing the key/value pairs of properties to override in the following format "property-key-1=property-value-1", "property-key-2=property-value-1", …​.

Examples

In the next examples, the value of the property whose name is host is replaced with localhost.

  • Legacy

  • Annotation

import static org.apache.camel.util.PropertiesHelper.asProperties;

class SomeTest extends CamelMainTestSupport {

    @Override
    protected Properties useOverridePropertiesWithPropertiesComponent() {
        return asProperties("host", "localhost");
    }

    // Rest of the test class
}
@CamelMainTest(properties = { "host=localhost" })
class SomeTest {

    // Rest of the test class
}

Replace from endpoints

To be able to test easily the behavior of a route without being affected by the type of from endpoint used in the route, it can be very helpful to replace the from endpoint with an endpoint more test friendly.

Legacy

The method replaceRouteFromWith() can be called to provide the id of the route to modify and the URI of the new from endpoint.

Annotation

The attribute replaceRouteFromWith can be set to provide an array of String representing a list of route IDs to modify and the URI of the new from endpoint in the following format "route-id-1=new-uri-1", "route-id-2=new-uri-2", …​.

Examples

In the next examples, the route whose id is main-route is advised to replace its current from endpoint with a direct:main endpoint.

  • Legacy

  • Annotation

class SomeTest extends CamelMainTestSupport {

    @Override
    @BeforeEach
    public void setUp() throws Exception {
        replaceRouteFromWith("main-route", "direct:main");
        super.setUp();
    }

    // Rest of the test class
}
@CamelMainTest(replaceRouteFromWith = { "main-route=direct:main" })
class SomeTest {

    // Rest of the test class
}

Configure additional camel configuration classes

In practice, additional camel configuration classes can be provided for the sake of simplicity directly from the constructor of the Camel Main like for example new Main(SomeApplication.class, SomeCamelConfiguration.class) where SomeApplication.class is the main class of the application and SomeCamelConfiguration.class is an additional camel configuration class.

Legacy

There is no specific method for that, but it can be done by overriding the method configure(MainConfigurationProperties configuration) like described in a previous section.

Annotation

The attribute configurationClasses can be set to provide an array of additional camel configuration classes.

Examples

In the next examples, the camel configuration class SomeCamelConfiguration is added to the global configuration.

  • Legacy

  • Annotation

class SomeTest extends CamelMainTestSupport {

    @Override
    protected void configure(MainConfigurationProperties configuration) {
        // Add the configuration class
        configuration.addConfiguration(SomeCamelConfiguration.class);
    }

    // Rest of the test class
}
@CamelMainTest(configurationClasses = SomeCamelConfiguration.class)
class SomeTest {

    // Rest of the test class
}

Advice a route

It is possible to modify a route within the context of a test by using advices generally represented by specific route builders of type AdviceWithRouteBuilder as it proposes out-of-box utility methods allowing to advice a route easily.

Legacy

A route needs to be advised directly in the test method using one of the utility method AdviceWith.adviceWith and the Camel context has to be started explicitly once the route has been advised to take it into account.

Annotation

The attribute advices can be set to provide an array of annotations of type AdviceRouteMapping representing a mapping between a route to advice and the corresponding route builders to call to advice the route. As the route builders are instantiated using the default constructor, make sure that the default constructor exists.

Examples

In the next examples, the route whose id is main-route is advised to replace its current from endpoint with a direct:main endpoint.

  • Legacy

  • Annotation

class SomeTest extends CamelMainTestSupport {

    @Override
    public boolean isUseAdviceWith() { (1)
        return true;
    }

    @Test
    void someTest() throws Exception {
        // Advice the route to replace the from endpoint
        AdviceWith.adviceWith(context, "main-route", ad -> ad.replaceFromWith("direct:main")); (2)

        // must start Camel after we are done using advice-with
        context.start(); (3)

        // Rest of the test method
    }

    // Rest of the test class
}
1 Override the method isUseAdviceWith to return true indicating that the Camel context should not be started before calling the test method as there is at least one route to advise.
2 Call a utility method AdviceWith.adviceWith to advice a route
3 Start the Camel context as it was not yet started
@CamelMainTest(advices = @AdviceRouteMapping(route = "main-route", advice = SomeTest.SomeRouteBuilder.class))
class SomeTest {

    static class SomeRouteBuilder extends AdviceWithRouteBuilder {

        @Override
        public void configure() throws Exception {
            replaceFromWith("direct:main");
        }
    }

    // Rest of the test class
}

Mock and skip an endpoint

For testing purpose, it can be helpful to mock only or to mock and skip all the endpoints matching with a given pattern.

Legacy

The method isMockEndpoints() can be overridden to provide the pattern that should match with the endpoints to mock. The method isMockEndpointsAndSkip() can be overridden to provide the pattern that should match with the endpoints to mock and skip.

Annotation

The attribute mockEndpoints can be set to provide the pattern that should match with the endpoints to mock. The attribute mockEndpointsAndSkip can be set to provide the pattern that should match with the endpoints to mock and skip.

Examples

In the next examples, the endpoints whose URI starts with direct: are mocked.

  • Legacy

  • Annotation

class SomeTest extends CamelMainTestSupport {

    @Override
    public String isMockEndpoints() {
        return "direct:*";
    }

    // Rest of the test class
}
@CamelMainTest(mockEndpoints = "direct:*")
class SomeTest {

    // Rest of the test class
}

Dump route coverage

It is possible to dump the route coverage of a given test. This feature needs JMX to be enabled which is done automatically when the feature itself is enabled, it also means that the camel-management has to be part of the dependencies of the project to be able to use it. The feature can be enabled globally by setting the system property CamelTestRouteCoverage to true.

The result is generated in target/camel-route-coverage/class-name-test-name.xml.

Legacy

The method isDumpRouteCoverage() can be overridden to return true indicating that the feature is enabled.

Annotation

The attribute dumpRouteCoverage can be set to true indicating that the feature is enabled.

Override the shutdown timeout

The default shutdown timeout of Camel is not really adapted for a test as it can be very long. This feature allows overriding it to 10 seconds by default, but it can also be set to a custom value knowing that it is expressed in seconds.

Legacy

The method getShutdownTimeout() can be overridden to return the expected shutdown timeout.

Annotation

The attribute shutdownTimeout can be set to the expected shutdown timeout.

Debug mode

For debugging purpose, it is possible to be called before and after invoking a processor allowing you to log specific messages or add breakpoints in your favorite IDE.

Legacy

The method isUseDebugger() can be overridden to return true indicating that the feature is enabled. The methods debugBefore and debugAfter can then be overridden to execute some specific code for debugging purpose.

Annotation

The test class needs to implement the interface org.apache.camel.test.main.junit5.DebuggerCallback to enable the feature. The methods debugBefore and debugAfter can then be implemented to execute some specific code for debugging purpose.

Enable JMX

JMX is disabled by default when launching the tests, however, if needed, it is still possible to enable it.

Legacy

The method useJmx() can be overridden to return true. It returns false by default.

Annotation

The attribute useJmx can be set to true. It is set to false by default.

Examples

In the next examples, JMX has been enabled for the test.

  • Legacy

  • Annotation

class SomeTest extends CamelMainTestSupport {

    @Override
    protected boolean useJmx() {
        return true;
    }

    // Rest of the test class
}
@CamelMainTest(useJmx = true)
class SomeTest {

    // Rest of the test class
}

Nested tests

The annotation-based approach supports natively Nested tests. It is even possible to annotate @Nested test class with @CamelMainTest to change the configuration inherited from the outer class. However, please note that not all attributes can be set at nested test class level. Indeed, for the sake of simplicity, the attributes dumpRouteCoverage and shutdownTimeout can only be set at outer class level.

According to the total number of values accepted by an attribute, if a @Nested test class set this attribute, the behavior can change:

  • In case of multivalued attributes like properties, replaceRouteFromWith, configurationClasses and advices, the values set on the @Nested test class are added to the values of the outer classes, and the resulting values are ordered from outermost to innermost.

  • In case of mono-valued attributes like mainClass, propertyPlaceholderFileName, mockEndpoints and mockEndpointsAndSkip, the value set on the innermost class is used.

The only exception is the attribute propertyPlaceholderLocations that behaves like a mono-valued attribute. Because it is tightly coupled with propertyPlaceholderFileName, so it must have the same behavior for the sake of consistency.

To have a better understanding of the behavior for each type of attribute, please check the following examples:

Multivalued

In the next example, the property some-property is set to foo for all the tests in SomeTest including the tests in SomeNestedTest. Additionally, the property some-other-property is set to bar but only for all the tests in SomeNestedTest.

@CamelMainTest(properties = { "some-property=foo" })
class SomeTest {

    @Nested
    @CamelMainTest(properties = { "some-other-property=bar" })
    class SomeNestedTest {

        // Rest of the nested test class
    }

    // Rest of the test class
}

Mono-valued

In the next example, SomeMainClass is used as the main class for all the tests directly inside SomeTest, but also the tests in the @Nested test class SomeOtherNestedTest as it is not redefined. SomeOtherMainClass is used as the main class for all the tests directly inside SomeNestedTest, but also the tests in the @Nested test class SomeDeeplyNestedTest as it is not redefined.

@CamelMainTest(mainClass = SomeMainClass.class)
class SomeTest {

    @CamelMainTest(mainClass = SomeOtherMainClass.class)
    @Nested
    class SomeNestedTest {

        @Nested
        class SomeDeeplyNestedTest {

           // Rest of the nested test class
        }

       // Rest of the nested test class
    }

    @Nested
    class SomeOtherNestedTest {

       // Rest of the nested test class
    }

    // Rest of the test class
}

The annotations @Configure and @ReplaceInRegistry can also be used on methods or fields inside @Nested test classes knowing that the annotations of outer classes are processed before the annotations of inner classes.