Git

Since Camel 2.16

Both producer and consumer are supported

The Git component allows you to work with a generic Git repository.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-git</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI Format

git://localRepositoryPath[?options]

URI Options

The producer allows doing operations on a specific repository. The consumer allows consuming commits, tags, and branches in a specific repository.

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Git component supports 5 options, which are listed below.

Name Description Default Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

healthCheckConsumerEnabled (health)

Used for enabling or disabling all consumer based health checks from this component.

true

boolean

healthCheckProducerEnabled (health)

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

boolean

Endpoint Options

The Git endpoint is configured using URI syntax:

git:localPath

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

localPath (common)

Required Local repository path.

String

Query Parameters (31 parameters)

Name Description Default Type

branchName (common)

The branch name to work on.

String

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

type (consumer)

The consumer type.

Enum values:

  • commit

  • tag

  • branch

GitType

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

pollStrategy (consumer (advanced))

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

allowEmpty (producer)

The flag to manage empty git commits.

true

boolean

operation (producer)

The operation to do on the repository.

Enum values:

  • add

  • cherryPick

  • clean

  • clone

  • commit

  • commitAll

  • createBranch

  • createTag

  • deleteBranch

  • deleteTag

  • gc

  • init

  • log

  • pull

  • push

  • remoteAdd

  • remoteList

  • remove

  • showBranches

  • showTags

  • status

String

remoteName (producer)

The remote repository name to use in particular operation like pull.

String

remotePath (producer)

The remote repository path.

String

tagName (producer)

The tag name to work on.

String

targetBranchName (producer)

Name of target branch in merge operation. If not supplied will try to use init.defaultBranch git configs. If not configured will use default value.

master

String

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

gitConfigFile (advanced)

A String with path to a .gitconfig file.

String

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that.

Enum values:

  • TRACE

  • DEBUG

  • INFO

  • WARN

  • ERROR

  • OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler.

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options.

Enum values:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

password (security)

Remote repository password.

String

username (security)

Remote repository username.

String

Message Headers

The Git component supports 13 message header(s), which is/are listed below:

Name Description Default Type

CamelGitOperation (producer)

Constant: GIT_OPERATION

The operation to do on a repository, if not specified as endpoint option.

String

CamelGitFilename (producer)

Constant: GIT_FILE_NAME

The file name in an add operation.

String

CamelGitCommitMessage (producer)

Constant: GIT_COMMIT_MESSAGE

The commit message related in a commit operation.

String

CamelGitCommitUsername (producer)

Constant: GIT_COMMIT_USERNAME

The commit username in a commit operation.

String

CamelGitCommitEmail (producer)

Constant: GIT_COMMIT_EMAIL

The commit email in a commit operation.

String

CamelGitCommitId (common)

Constant: GIT_COMMIT_ID

The commit id.

String

CamelGitAllowEmpty (producer)

Constant: GIT_ALLOW_EMPTY

The flag to manage empty git commits.

Boolean

CamelGitAuthorName (consumer)

Constant: GIT_COMMIT_AUTHOR_NAME

The author name.

String

CamelGitCommiterName (consumer)

Constant: GIT_COMMIT_COMMITTER_NAME

The committer name.

String

CamelGitCommitTime (consumer)

Constant: GIT_COMMIT_TIME

The commit time.

int

CamelGitBranchName (consumer)

Constant: GIT_BRANCH_NAME

The branch/tag name.

String

CamelGitBranchLeaf (consumer)

Constant: GIT_BRANCH_LEAF

The leaf.

String

CamelGitBranchObjectId (consumer)

Constant: GIT_BRANCH_OBJECT_ID

The object id.

String

Examples

Producer Example

Below is an example route of a producer that adds a file test.java to a local repository, commits it with a specific message on the main branch and then pushes it to remote repository.

from("direct:start")
    .setHeader(GitConstants.GIT_FILE_NAME, constant("test.java"))
    .to("git:///tmp/testRepo?operation=add")
    .setHeader(GitConstants.GIT_COMMIT_MESSAGE, constant("first commit"))
    .to("git:///tmp/testRepo?operation=commit")
    .to("git:///tmp/testRepo?operation=push&remotePath=https://foo.com/test/test.git&username=xxx&password=xxx")
    .to("git:///tmp/testRepo?operation=createTag&tagName=myTag")
    .to("git:///tmp/testRepo?operation=pushTag&tagName=myTag&remoteName=origin");

Consumer Example

Below is an example route of a consumer that consumes commit:

from("git:///tmp/testRepo?type=commit")
    .to(....)

Custom config file

By default, camel-git will load .gitconfig file from user home folder. You can override this by providing your own .gitconfig file.

from("git:///tmp/testRepo?type=commit&gitConfigFile=file:/tmp/configfile")
    .to(....); // will load from os dirs

from("git:///tmp/testRepo?type=commit&gitConfigFile=classpath:configfile")
    .to(....); // will load from resources dir

from("git:///tmp/testRepo?type=commit&gitConfigFile=http://somedomain.xyz/gitconfigfile")
    .to(....); // will load from http. You could also use https

Spring Boot Auto-Configuration

When using git with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-git-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 6 options, which are listed below.

Name Description Default Type

camel.component.git.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.git.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.git.enabled

Whether to enable auto configuration of the git component. This is enabled by default.

Boolean

camel.component.git.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.git.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.git.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean
Back to top