Kubernetes ConfigMap
Perform operations on Kubernetes ConfigMaps and get notified on ConfigMaps changes.
What’s inside
-
Kubernetes ConfigMap component, URI syntax:
kubernetes-config-maps:masterUrl -
Kubernetes Cronjob component, URI syntax:
kubernetes-cronjob:masterUrl -
Kubernetes Custom Resources component, URI syntax:
kubernetes-custom-resources:masterUrl -
Kubernetes Deployments component, URI syntax:
kubernetes-deployments:masterUrl -
Kubernetes Event component, URI syntax:
kubernetes-events:masterUrl -
Kubernetes HPA component, URI syntax:
kubernetes-hpa:masterUrl -
Kubernetes Job component, URI syntax:
kubernetes-job:masterUrl -
Kubernetes Namespaces component, URI syntax:
kubernetes-namespaces:masterUrl -
Kubernetes Nodes component, URI syntax:
kubernetes-nodes:masterUrl -
Kubernetes Persistent Volume component, URI syntax:
kubernetes-persistent-volumes:masterUrl -
Kubernetes Persistent Volume Claim component, URI syntax:
kubernetes-persistent-volumes-claims:masterUrl -
Kubernetes Pods component, URI syntax:
kubernetes-pods:masterUrl -
Kubernetes Replication Controller component, URI syntax:
kubernetes-replication-controllers:masterUrl -
Kubernetes Resources Quota component, URI syntax:
kubernetes-resources-quota:masterUrl -
Kubernetes Secrets component, URI syntax:
kubernetes-secrets:masterUrl -
Kubernetes Service Account component, URI syntax:
kubernetes-service-accounts:masterUrl -
Kubernetes Services component, URI syntax:
kubernetes-services:masterUrl -
OpenShift Build Config component, URI syntax:
openshift-build-configs:masterUrl -
OpenShift Builds component, URI syntax:
openshift-builds:masterUrl -
OpenShift Deployment Configs component, URI syntax:
openshift-deploymentconfigs:masterUrl
Please refer to the above links for usage and configuration details.
Maven coordinates
<dependency>
<groupId>org.apache.camel.springboot</groupId>
<artifactId>camel-kubernetes-starter</artifactId>
</dependency>Spring Boot Auto-Configuration
The starter supports 91 options, which are listed below.
| Name | Description | Default | Type |
|---|---|---|---|
camel.component.kubernetes-config-maps.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-config-maps.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-config-maps.enabled | Whether to enable auto configuration of the kubernetes-config-maps component. This is enabled by default. | Boolean | |
camel.component.kubernetes-config-maps.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-config-maps.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-cronjob.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-cronjob.enabled | Whether to enable auto configuration of the kubernetes-cronjob component. This is enabled by default. | Boolean | |
camel.component.kubernetes-cronjob.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-cronjob.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-custom-resources.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-custom-resources.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-custom-resources.enabled | Whether to enable auto configuration of the kubernetes-custom-resources component. This is enabled by default. | Boolean | |
camel.component.kubernetes-custom-resources.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-custom-resources.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-deployments.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-deployments.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-deployments.enabled | Whether to enable auto configuration of the kubernetes-deployments component. This is enabled by default. | Boolean | |
camel.component.kubernetes-deployments.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-deployments.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-events.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-events.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-events.enabled | Whether to enable auto configuration of the kubernetes-events component. This is enabled by default. | Boolean | |
camel.component.kubernetes-events.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-events.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-hpa.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-hpa.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-hpa.enabled | Whether to enable auto configuration of the kubernetes-hpa component. This is enabled by default. | Boolean | |
camel.component.kubernetes-hpa.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-hpa.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-job.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-job.enabled | Whether to enable auto configuration of the kubernetes-job component. This is enabled by default. | Boolean | |
camel.component.kubernetes-job.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-job.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-namespaces.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-namespaces.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-namespaces.enabled | Whether to enable auto configuration of the kubernetes-namespaces component. This is enabled by default. | Boolean | |
camel.component.kubernetes-namespaces.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-namespaces.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-nodes.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-nodes.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-nodes.enabled | Whether to enable auto configuration of the kubernetes-nodes component. This is enabled by default. | Boolean | |
camel.component.kubernetes-nodes.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-nodes.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-persistent-volumes-claims.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-persistent-volumes-claims.enabled | Whether to enable auto configuration of the kubernetes-persistent-volumes-claims component. This is enabled by default. | Boolean | |
camel.component.kubernetes-persistent-volumes-claims.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-persistent-volumes-claims.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-persistent-volumes.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-persistent-volumes.enabled | Whether to enable auto configuration of the kubernetes-persistent-volumes component. This is enabled by default. | Boolean | |
camel.component.kubernetes-persistent-volumes.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-persistent-volumes.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-pods.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-pods.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-pods.enabled | Whether to enable auto configuration of the kubernetes-pods component. This is enabled by default. | Boolean | |
camel.component.kubernetes-pods.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-pods.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-replication-controllers.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-replication-controllers.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-replication-controllers.enabled | Whether to enable auto configuration of the kubernetes-replication-controllers component. This is enabled by default. | Boolean | |
camel.component.kubernetes-replication-controllers.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-replication-controllers.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-resources-quota.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-resources-quota.enabled | Whether to enable auto configuration of the kubernetes-resources-quota component. This is enabled by default. | Boolean | |
camel.component.kubernetes-resources-quota.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-resources-quota.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-secrets.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-secrets.enabled | Whether to enable auto configuration of the kubernetes-secrets component. This is enabled by default. | Boolean | |
camel.component.kubernetes-secrets.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-secrets.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-service-accounts.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-service-accounts.enabled | Whether to enable auto configuration of the kubernetes-service-accounts component. This is enabled by default. | Boolean | |
camel.component.kubernetes-service-accounts.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-service-accounts.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.kubernetes-services.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.kubernetes-services.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.kubernetes-services.enabled | Whether to enable auto configuration of the kubernetes-services component. This is enabled by default. | Boolean | |
camel.component.kubernetes-services.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.kubernetes-services.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.openshift-build-configs.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.openshift-build-configs.enabled | Whether to enable auto configuration of the openshift-build-configs component. This is enabled by default. | Boolean | |
camel.component.openshift-build-configs.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.openshift-build-configs.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.openshift-builds.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.openshift-builds.enabled | Whether to enable auto configuration of the openshift-builds component. This is enabled by default. | Boolean | |
camel.component.openshift-builds.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.openshift-builds.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
camel.component.openshift-deploymentconfigs.autowired-enabled | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean |
camel.component.openshift-deploymentconfigs.bridge-error-handler | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
camel.component.openshift-deploymentconfigs.enabled | Whether to enable auto configuration of the openshift-deploymentconfigs component. This is enabled by default. | Boolean | |
camel.component.openshift-deploymentconfigs.kubernetes-client | To use an existing kubernetes client. The option is a io.fabric8.kubernetes.client.KubernetesClient type. | KubernetesClient | |
camel.component.openshift-deploymentconfigs.lazy-start-producer | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |