Nitrite Component

Since Camel 3.0

Both producer and consumer is supported

Nitrite component is used to access Nitrite NoSQL database

Maven users will need to add the following dependency to their pom.xml for this component.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-nitrite</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Options

The Nitrite component supports 3 options, which are listed below.

Name Description Default Type

basicPropertyBinding (advanced)

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

The Nitrite endpoint is configured using URI syntax:

nitrite:database

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

database

Required Path to database file. Will be created if not exists.

String

Query Parameters (11 parameters):

Name Description Default Type

collection (common)

Name of Nitrite collection. Cannot be used in combination with repositoryClass option.

String

repositoryClass (common)

Class of Nitrite ObjectRepository. Cannot be used in combination with collection option.

Class

repositoryName (common)

Optional name of ObjectRepository. Can be only used in combination with repositoryClass, otherwise have no effect

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange.

ExchangePattern

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

password (security)

Password for Nitrite database. Required, if option username specified.

String

username (security)

Username for Nitrite database. Database is not secured if option not specified.

String

Spring Boot Auto-Configuration

When using Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-nitrite-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 4 options, which are listed below.

Name Description Default Type

camel.component.nitrite.basic-property-binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean

camel.component.nitrite.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.nitrite.enabled

Whether to enable auto configuration of the nitrite component. This is enabled by default.

Boolean

camel.component.nitrite.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

Message headers

Consumer headers

The following headers are available when consuming from Nitrite.

Header constant Header value Type Description

NitriteConstants.CHANGE_TIMESTAMP

"CamelNitriteChangeTimestamp"

Long

Event timestamp in Epoch millis

NitriteConstants.CHANGE_TYPE

"CamelNitriteChangeType"

org.dizitart.no2.event.ChangeType

Type of event

Producer headers

The following headers are available when producing to Nitrite.

Header constant Header value Type Description

NitriteConstants.OPERATION

"CamelNitriteOperation"

AbstractNitriteOperation

Operation to invoke on Collection or Repository. Defaults to UpsertOperation if not specified

NitriteConstants.WRITE_RESULT

"CamelNitriteWriteResult"

org.dizitart.no2.WriteResult

Result of data modifying operation

Producer operations

The following Operations are available to specify as NitriteConstants.OPERATION when producing to Nitrite.

Class Type Parameters Description

FindCollectionOperation

collection

Filter(optional), FindOptions(optional)

Find Documents in collection by Filter. If not specified, returns all documents

RemoveCollectionOperation

collection

Filter(required), RemoveOptions(optional)

Remove documents matching Filter

UpdateCollectionOperation

collection

Filter(required), UpdateOptions(optional), Document(optional)

Update documents matching Filter. If Document not specified, the message body is used

CreateIndexOperation

common

field:String(required), IndexOptions(required)

Create index with IndexOptions on field

DropIndexOperation

common

field:String(required)

Drop index on field

ExportDatabaseOperation

common

ExportOptions(optional)

Export full database to JSON and stores result in body - see Nitrite docs for details about format

GetAttributesOperation

common

Get attributes of collection

GetByIdOperation

common

NitriteId

Get Document by _id

ImportDatabaseOperation

common

Import full database from JSON in body

InsertOperation

common

payload(optional)

Insert document to collection or object to ObjectRepository. If parameter not specified, inserts message body

ListIndicesOperation

common

List indexes in collection and stores List<Index> in message body

RebuildIndexOperation

common

field (required), async (optional)

Rebuild existing index on field

UpdateOperation

common

payload(optional)

Update document in collection or object in ObjectRepository. If parameter not specified, updates document from message body

UpsertOperation

common

payload(optional)

Upsert (Insert or Update) document in collection or object in ObjectRepository. If parameter not specified, updates document from message body

FindRepositoryOperation

repository

ObjectFilter(optional), FindOptions(optional)

Find objects in ObjectRepository by ObjectFilter. If not specified, returns all objects in repository

RemoveRepositoryOperation

repository

ObjectFilter(required), RepoveOptions(optional)

Remove objects in ObjectRepository matched by ObjectFilter

UpdateRepositoryOperation

repository

ObjectFilter(required), UpdateOptions(optional), payload(optional)

Update objects matching ObjectFilter. If payload not specified, the message body is used

Examples

Consume changes in collection.

from("nitrite:/path/to/database.db?collection=myCollection")
    .to("log:change")

Consume changes in object repository.

from("nitrite:/path/to/database.db?repositoryClass=my.project.MyPersistentObject")
    .to("log:change")
package my.project;

@Indices({
        @Index(value = "key1", type = IndexType.NonUnique)
})
public class MyPersistentObject {
    @Id
    private long id;
    private String key1;
    // Getters, setters
}

Insert or update document

from("direct:upsert")
    .setBody(constant(Document.createDocument("key1", "val1")))
    .to("nitrite:/path/to/database.db?collection=myCollection")

Get Document by id

from("direct:getByID")
    .setHeader(NitriteConstants.OPERATION, () -> new GetByIdOperation(NitriteId.createId(123L)))
    .to("nitrite:/path/to/database.db?collection=myCollection")
    .to("log:result")

Find Document in collection

from("direct:getByID")
    .setHeader(NitriteConstants.OPERATION, () -> new FindCollectionOperation(Filters.eq("myKey", "withValue")))
    .to("nitrite:/path/to/database.db?collection=myCollection")
    .to("log:result");