AWS S3 Storage Service

Since Camel 3.2

Both producer and consumer are supported

The AWS2 S3 component supports storing and retrieving objects from/to Amazon’s S3 service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon S3. More information is available at Amazon S3.

URI Format

aws2-s3://bucketNameOrArn[?options]

The bucket will be created if it doesn’t already exist.

You can append query options to the URI in the following format:

?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The AWS S3 Storage Service component supports 59 options, which are listed below.

Name Description Default Type

autoCreateBucket (common)

Setting the autocreation of the S3 bucket bucketName. This will apply also in case of moveAfterRead option enabled, and it will create the destinationBucket if it doesn’t exist already.

false

boolean

configuration (common)

The component configuration.

AWS2S3Configuration

delimiter (common)

The delimiter which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only consume objects we are interested in.

String

forcePathStyle (common)

Set whether the S3 client should use path-style URL instead of virtual-hosted-style.

false

boolean

overrideEndpoint (common)

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

boolean

pojoRequest (common)

If we want to use a POJO request as body or not.

false

boolean

policy (common)

The policy for this queue to set in the com.amazonaws.services.s3.AmazonS3#setBucketPolicy() method.

String

prefix (common)

The prefix which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only consume objects we are interested in.

String

region (common)

The region in which the S3 client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

Enum values:

  • ap-south-2

  • ap-south-1

  • eu-south-1

  • eu-south-2

  • us-gov-east-1

  • me-central-1

  • il-central-1

  • ca-central-1

  • eu-central-1

  • us-iso-west-1

  • eu-central-2

  • us-west-1

  • us-west-2

  • af-south-1

  • eu-north-1

  • eu-west-3

  • eu-west-2

  • eu-west-1

  • ap-northeast-3

  • ap-northeast-2

  • ap-northeast-1

  • me-south-1

  • sa-east-1

  • ap-east-1

  • cn-north-1

  • us-gov-west-1

  • ap-southeast-1

  • ap-southeast-2

  • us-iso-east-1

  • ap-southeast-3

  • ap-southeast-4

  • us-east-1

  • us-east-2

  • cn-northwest-1

  • us-isob-east-1

  • aws-global

  • aws-cn-global

  • aws-us-gov-global

  • aws-iso-global

  • aws-iso-b-global

String

uriEndpointOverride (common)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

customerAlgorithm (common (advanced))

Define the customer algorithm to use in case CustomerKey is enabled.

String

customerKeyId (common (advanced))

Define the id of the Customer key to use in case CustomerKey is enabled.

String

customerKeyMD5 (common (advanced))

Define the MD5 of Customer key to use in case CustomerKey is enabled.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

deleteAfterRead (consumer)

Delete objects from S3 after they have been retrieved. The deleting is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieved over and over again in the polls. Therefore, you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the AWS2S3Constants#BUCKET_NAME and AWS2S3Constants#KEY headers, or only the AWS2S3Constants#KEY header.

true

boolean

destinationBucket (consumer)

Define the destination bucket where an object must be moved when moveAfterRead is set to true.

String

destinationBucketPrefix (consumer)

Define the destination bucket prefix to use when an object must be moved, and moveAfterRead is set to true.

String

destinationBucketSuffix (consumer)

Define the destination bucket suffix to use when an object must be moved, and moveAfterRead is set to true.

String

doneFileName (consumer)

If provided, Camel will only consume files if a done file exists.

String

fileName (consumer)

To get the object from the bucket with the given file name.

String

ignoreBody (consumer)

If it is true, the S3 Object Body will be ignored completely if it is set to false, the S3 Object will be put in the body. Setting this to true will override any behavior defined by includeBody option.

false

boolean

includeBody (consumer)

If it is true, the S3Object exchange will be consumed and put into the body and closed. If false, the S3Object stream will be put raw into the body and the headers will be set with the S3 object metadata. This option is strongly related to the autocloseBody option. In case of setting includeBody to true because the S3Object stream will be consumed then it will also be closed, while in case of includeBody false then it will be up to the caller to close the S3Object stream. However, setting autocloseBody to true when includeBody is false it will schedule to close the S3Object stream automatically on exchange completion.

true

boolean

includeFolders (consumer)

If it is true, the folders/directories will be consumed. If it is false, they will be ignored, and Exchanges will not be created for those.

true

boolean

moveAfterRead (consumer)

Move objects from S3 bucket to a different bucket after they have been retrieved. To accomplish the operation, the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.

false

boolean

autocloseBody (consumer (advanced))

If this option is true and includeBody is false, then the S3Object.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to false and autocloseBody to false, it will be up to the caller to close the S3Object stream. Setting autocloseBody to true, will close the S3Object stream automatically.

true

boolean

batchMessageNumber (producer)

The number of messages composing a batch in streaming upload mode.

10

int

batchSize (producer)

The batch size (in bytes) in streaming upload mode.

1000000

int

bufferSize (producer)

The buffer size (in bytes) in streaming upload mode.

1000000

int

deleteAfterWrite (producer)

Delete file object after the S3 file has been uploaded.

false

boolean

keyName (producer)

Setting the key name for an element in the bucket through endpoint parameter.

String

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

multiPartUpload (producer)

If it is true, camel will upload the file with multipart format. The part size is decided by the partSize option. Camel will only do multipart uploads for files that are larger than the part-size thresholds. Files that are smaller will be uploaded in a single operation.

false

boolean

namingStrategy (producer)

The naming strategy to use in streaming upload mode.

Enum values:

  • progressive

  • random

progressive

AWSS3NamingStrategyEnum

operation (producer)

The operation to do in case the user don’t want to do only an upload.

Enum values:

  • copyObject

  • listObjects

  • deleteObject

  • deleteBucket

  • listBuckets

  • getObject

  • getObjectRange

  • createDownloadLink

AWS2S3Operations

partSize (producer)

Set up the partSize which is used in multipart upload, the default size is 25M. Camel will only do multipart uploads for files that are larger than the part-size thresholds. Files that are smaller will be uploaded in a single operation.

26214400

long

restartingPolicy (producer)

The restarting policy to use in streaming upload mode.

Enum values:

  • override

  • lastPart

override

AWSS3RestartingPolicyEnum

storageClass (producer)

The storage class to set in the com.amazonaws.services.s3.model.PutObjectRequest request.

String

streamingUploadMode (producer)

When stream mode is true, the upload to bucket will be done in streaming.

false

boolean

streamingUploadTimeout (producer)

While streaming upload mode is true, this option set the timeout to complete upload.

long

awsKMSKeyId (producer (advanced))

Define the id of KMS key to use in case KMS is enabled.

String

useAwsKMS (producer (advanced))

Define if KMS must be used or not.

false

boolean

useCustomerKey (producer (advanced))

Define if Customer Key must be used or not.

false

boolean

useSSES3 (producer (advanced))

Define if SSE S3 must be used or not.

false

boolean

amazonS3Client (advanced)

Autowired Reference to a com.amazonaws.services.s3.AmazonS3 in the registry.

S3Client

amazonS3Presigner (advanced)

Autowired An S3 Presigner for Request, used mainly in createDownloadLink operation.

S3Presigner

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

healthCheckConsumerEnabled (health)

Used for enabling or disabling all consumer based health checks from this component.

true

boolean

healthCheckProducerEnabled (health)

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

boolean

proxyHost (proxy)

To define a proxy host when instantiating the SQS client.

String

proxyPort (proxy)

Specify a proxy port to be used inside the client definition.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the S3 client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider, this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

sessionToken (security)

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the S3 client should expect to load credentials through a default credentials provider.

false

boolean

useProfileCredentialsProvider (security)

Set whether the S3 client should expect to load credentials through a profile credentials provider.

false

boolean

useSessionCredentials (security)

Set whether the S3 client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in S3.

false

boolean

Endpoint Options

The AWS S3 Storage Service endpoint is configured using URI syntax:

aws2-s3://bucketNameOrArn

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

bucketNameOrArn (common)

Required Bucket name or ARN.

String

Query Parameters (75 parameters)

Name Description Default Type

autoCreateBucket (common)

Setting the autocreation of the S3 bucket bucketName. This will apply also in case of moveAfterRead option enabled, and it will create the destinationBucket if it doesn’t exist already.

false

boolean

delimiter (common)

The delimiter which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only consume objects we are interested in.

String

forcePathStyle (common)

Set whether the S3 client should use path-style URL instead of virtual-hosted-style.

false

boolean

overrideEndpoint (common)

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

boolean

pojoRequest (common)

If we want to use a POJO request as body or not.

false

boolean

policy (common)

The policy for this queue to set in the com.amazonaws.services.s3.AmazonS3#setBucketPolicy() method.

String

prefix (common)

The prefix which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only consume objects we are interested in.

String

region (common)

The region in which the S3 client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

Enum values:

  • ap-south-2

  • ap-south-1

  • eu-south-1

  • eu-south-2

  • us-gov-east-1

  • me-central-1

  • il-central-1

  • ca-central-1

  • eu-central-1

  • us-iso-west-1

  • eu-central-2

  • us-west-1

  • us-west-2

  • af-south-1

  • eu-north-1

  • eu-west-3

  • eu-west-2

  • eu-west-1

  • ap-northeast-3

  • ap-northeast-2

  • ap-northeast-1

  • me-south-1

  • sa-east-1

  • ap-east-1

  • cn-north-1

  • us-gov-west-1

  • ap-southeast-1

  • ap-southeast-2

  • us-iso-east-1

  • ap-southeast-3

  • ap-southeast-4

  • us-east-1

  • us-east-2

  • cn-northwest-1

  • us-isob-east-1

  • aws-global

  • aws-cn-global

  • aws-us-gov-global

  • aws-iso-global

  • aws-iso-b-global

String

uriEndpointOverride (common)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

customerAlgorithm (common (advanced))

Define the customer algorithm to use in case CustomerKey is enabled.

String

customerKeyId (common (advanced))

Define the id of the Customer key to use in case CustomerKey is enabled.

String

customerKeyMD5 (common (advanced))

Define the MD5 of Customer key to use in case CustomerKey is enabled.

String

deleteAfterRead (consumer)

Delete objects from S3 after they have been retrieved. The deleting is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieved over and over again in the polls. Therefore, you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the AWS2S3Constants#BUCKET_NAME and AWS2S3Constants#KEY headers, or only the AWS2S3Constants#KEY header.

true

boolean

destinationBucket (consumer)

Define the destination bucket where an object must be moved when moveAfterRead is set to true.

String

destinationBucketPrefix (consumer)

Define the destination bucket prefix to use when an object must be moved, and moveAfterRead is set to true.

String

destinationBucketSuffix (consumer)

Define the destination bucket suffix to use when an object must be moved, and moveAfterRead is set to true.

String

doneFileName (consumer)

If provided, Camel will only consume files if a done file exists.

String

fileName (consumer)

To get the object from the bucket with the given file name.

String

ignoreBody (consumer)

If it is true, the S3 Object Body will be ignored completely if it is set to false, the S3 Object will be put in the body. Setting this to true will override any behavior defined by includeBody option.

false

boolean

includeBody (consumer)

If it is true, the S3Object exchange will be consumed and put into the body and closed. If false, the S3Object stream will be put raw into the body and the headers will be set with the S3 object metadata. This option is strongly related to the autocloseBody option. In case of setting includeBody to true because the S3Object stream will be consumed then it will also be closed, while in case of includeBody false then it will be up to the caller to close the S3Object stream. However, setting autocloseBody to true when includeBody is false it will schedule to close the S3Object stream automatically on exchange completion.

true

boolean

includeFolders (consumer)

If it is true, the folders/directories will be consumed. If it is false, they will be ignored, and Exchanges will not be created for those.

true

boolean

maxConnections (consumer)

Set the maxConnections parameter in the S3 client configuration.

60

int

maxMessagesPerPoll (consumer)

Gets the maximum number of messages as a limit to poll at each polling. Gets the maximum number of messages as a limit to poll at each polling. The default value is 10. Use 0 or a negative number to set it as unlimited.

10

int

moveAfterRead (consumer)

Move objects from S3 bucket to a different bucket after they have been retrieved. To accomplish the operation, the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.

false

boolean

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

autocloseBody (consumer (advanced))

If this option is true and includeBody is false, then the S3Object.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to false and autocloseBody to false, it will be up to the caller to close the S3Object stream. Setting autocloseBody to true, will close the S3Object stream automatically.

true

boolean

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

pollStrategy (consumer (advanced))

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

batchMessageNumber (producer)

The number of messages composing a batch in streaming upload mode.

10

int

batchSize (producer)

The batch size (in bytes) in streaming upload mode.

1000000

int

bufferSize (producer)

The buffer size (in bytes) in streaming upload mode.

1000000

int

deleteAfterWrite (producer)

Delete file object after the S3 file has been uploaded.

false

boolean

keyName (producer)

Setting the key name for an element in the bucket through endpoint parameter.

String

multiPartUpload (producer)

If it is true, camel will upload the file with multipart format. The part size is decided by the partSize option. Camel will only do multipart uploads for files that are larger than the part-size thresholds. Files that are smaller will be uploaded in a single operation.

false

boolean

namingStrategy (producer)

The naming strategy to use in streaming upload mode.

Enum values:

  • progressive

  • random

progressive

AWSS3NamingStrategyEnum

operation (producer)

The operation to do in case the user don’t want to do only an upload.

Enum values:

  • copyObject

  • listObjects

  • deleteObject

  • deleteBucket

  • listBuckets

  • getObject

  • getObjectRange

  • createDownloadLink

AWS2S3Operations

partSize (producer)

Set up the partSize which is used in multipart upload, the default size is 25M. Camel will only do multipart uploads for files that are larger than the part-size thresholds. Files that are smaller will be uploaded in a single operation.

26214400

long

restartingPolicy (producer)

The restarting policy to use in streaming upload mode.

Enum values:

  • override

  • lastPart

override

AWSS3RestartingPolicyEnum

storageClass (producer)

The storage class to set in the com.amazonaws.services.s3.model.PutObjectRequest request.

String

streamingUploadMode (producer)

When stream mode is true, the upload to bucket will be done in streaming.

false

boolean

streamingUploadTimeout (producer)

While streaming upload mode is true, this option set the timeout to complete upload.

long

awsKMSKeyId (producer (advanced))

Define the id of KMS key to use in case KMS is enabled.

String

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

useAwsKMS (producer (advanced))

Define if KMS must be used or not.

false

boolean

useCustomerKey (producer (advanced))

Define if Customer Key must be used or not.

false

boolean

useSSES3 (producer (advanced))

Define if SSE S3 must be used or not.

false

boolean

amazonS3Client (advanced)

Autowired Reference to a com.amazonaws.services.s3.AmazonS3 in the registry.

S3Client

amazonS3Presigner (advanced)

Autowired An S3 Presigner for Request, used mainly in createDownloadLink operation.

S3Presigner

proxyHost (proxy)

To define a proxy host when instantiating the SQS client.

String

proxyPort (proxy)

Specify a proxy port to be used inside the client definition.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the S3 client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that.

Enum values:

  • TRACE

  • DEBUG

  • INFO

  • WARN

  • ERROR

  • OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler.

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options.

Enum values:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider, this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

sessionToken (security)

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the S3 client should expect to load credentials through a default credentials provider.

false

boolean

useProfileCredentialsProvider (security)

Set whether the S3 client should expect to load credentials through a profile credentials provider.

false

boolean

useSessionCredentials (security)

Set whether the S3 client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in S3.

false

boolean

Required S3 component options

You have to provide the amazonS3Client in the Registry or your accessKey and secretKey to access the Amazon’s S3.

Batch Consumer

This component implements the Batch Consumer.

This allows you, for instance, to know how many messages exist in this batch and for instance, let the Aggregator aggregate this number of messages.

Usage

For example, to read file hello.txt from bucket helloBucket, use the following snippet:

from("aws2-s3://helloBucket?accessKey=yourAccessKey&secretKey=yourSecretKey&prefix=hello.txt")
  .to("file:/var/downloaded");

Message Headers

The AWS S3 Storage Service component supports 30 message header(s), which is/are listed below:

Name Description Default Type

CamelAwsS3BucketName (common)

Constant: BUCKET_NAME

The bucket Name which this object will be stored or which will be used for the current operation or in which this object is contained.

String

CamelAwsS3BucketDestinationName (producer)

Constant: BUCKET_DESTINATION_NAME

The bucket Destination Name which will be used for the current operation.

String

CamelAwsS3ContentControl (common)

Constant: CACHE_CONTROL

The optional Cache-Control HTTP header which allows the user to specify caching behavior along the HTTP request/reply chain.

String

CamelAwsS3ContentDisposition (common)

Constant: CONTENT_DISPOSITION

The optional Content-Disposition HTTP header, which specifies presentational information such as the recommended filename for the object to be saved as.

String

CamelAwsS3ContentEncoding (common)

Constant: CONTENT_ENCODING

The optional Content-Encoding HTTP header specifying what content encodings have been applied to the object and what decoding mechanisms must be applied in order to obtain the media-type referenced by the Content-Type field.

String

CamelAwsS3ContentLength (common)

Constant: CONTENT_LENGTH

The Content-Length HTTP header indicating the size of the associated object in bytes.

Long

CamelAwsS3ContentMD5 (common)

Constant: CONTENT_MD5

The base64 encoded 128-bit MD5 digest of the associated object (content - not including headers) according to RFC 1864. This data is used as a message integrity check to verify that the data received by Amazon S3 is the same data that the caller sent.

String

CamelAwsS3ContentType (common)

Constant: CONTENT_TYPE

The Content-Type HTTP header, which indicates the type of content stored in the associated object. The value of this header is a standard MIME type.

String

CamelAwsS3ETag (common)

Constant: E_TAG

(producer) The ETag value for the newly uploaded object. (consumer) The hex encoded 128-bit MD5 digest of the associated object according to RFC 1864. This data is used as an integrity check to verify that the data received by the caller is the same data that was sent by Amazon S3.

String

CamelAwsS3Key (common)

Constant: KEY

The key under which this object is stored or will be stored or which will be used for the current operation.

String

CamelAwsS3DestinationKey (producer)

Constant: DESTINATION_KEY

The Destination key which will be used for the current operation.

String

CamelAwsS3LastModified (common)

Constant: LAST_MODIFIED

The value of the Last-Modified header, indicating the date and time at which Amazon S3 last recorded a modification to the associated object.

Date

CamelAwsS3StorageClass (common)

Constant: STORAGE_CLASS

The storage class of this object.

String

CamelAwsS3VersionId (common)

Constant: VERSION_ID

(producer) The optional version ID of the newly uploaded object. (consumer) The version ID of the associated Amazon S3 object if available. Version IDs are only assigned to objects when an object is uploaded to an Amazon S3 bucket that has object versioning enabled.

String

CamelAwsS3CannedAcl (producer)

Constant: CANNED_ACL

The canned acl that will be applied to the object. see software.amazon.awssdk.services.s3.model.ObjectCannedACL for allowed values.

String

CamelAwsS3Acl (producer)

Constant: ACL

A well constructed Amazon S3 Access Control List object.

Enum values:

  • private

  • public-read

  • public-read-write

  • authenticated-read

  • null

BucketCannedACL

CamelAwsS3Operation (common)

Constant: S3_OPERATION

The operation to perform. Permitted values are copyObject, deleteObject, listBuckets, deleteBucket, listObjects.

String

CamelAwsS3ServerSideEncryption (common)

Constant: SERVER_SIDE_ENCRYPTION

Sets the server-side encryption algorithm when encrypting the object using AWS-managed keys. For example use AES256.

String

CamelAwsS3ExpirationTime (consumer)

Constant: EXPIRATION_TIME

If the object expiration is configured (see PUT Bucket lifecycle), the response includes this header.

String

CamelAwsS3ReplicationStatus (consumer)

Constant: REPLICATION_STATUS

Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.

Enum values:

  • COMPLETE

  • PENDING

  • FAILED

  • REPLICA

  • COMPLETED

  • null

ReplicationStatus

CamelAwsS3RangeStart (producer)

Constant: RANGE_START

The position of the first byte to get.

String

CamelAwsS3RangeEnd (producer)

Constant: RANGE_END

The position of the last byte to get.

String

CamelAwsS3DowloadLinkExpirationTime (producer)

Constant: DOWNLOAD_LINK_EXPIRATION_TIME

The expiration time of the download link in milliseconds.

Long

CamelAwsS3DownloadLinkBrowserCompatible (producer)

Constant: DOWNLOAD_LINK_BROWSER_COMPATIBLE

Whether the download link is browser compatible.

boolean

CamelAwsS3DownloadLinkHttpRequestHeaders (producer)

Constant: DOWNLOAD_LINK_HTTP_REQUEST_HEADERS

The headers that are needed by the service (not needed when BrowserCompatible is true).

Map

CamelAwsS3DownloadLinkSignedPayload (producer)

Constant: DOWNLOAD_LINK_SIGNED_PAYLOAD

The request payload that is needed by the service (not needed when BrowserCompatible is true).

String

CamelAwsS3Metadata (common)

Constant: METADATA

A map of metadata to be stored or stored with the object in S3. More details about metadata https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingMetadata.htmlhere.

Map

CamelMessageTimestamp (consumer)

Constant: MESSAGE_TIMESTAMP

The timestamp of the message.

long

CamelAwsS3Prefix (common)

Constant: PREFIX

The prefix which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only list objects we are interested in.

CamelAwsS3Delimiter (common)

Constant: DELIMITER

The delimiter which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only list objects we are interested in.

String

S3 Producer operations

Camel-AWS2-S3 component provides the following operation on the producer side:

  • copyObject

  • deleteObject

  • listBuckets

  • deleteBucket

  • listObjects

  • getObject (this will return an S3Object instance)

  • getObjectRange (this will return an S3Object instance)

  • createDownloadLink

If you don’t specify an operation, explicitly the producer will do:

  • a single file upload

  • a multipart upload if multiPartUpload option is enabled

Advanced AmazonS3 configuration

If your Camel Application is running behind a firewall or if you need to have more control over the S3Client instance configuration, you can create your own instance and refer to it in your Camel aws2-s3 component configuration:

from("aws2-s3://MyBucket?amazonS3Client=#client&delay=5000&maxMessagesPerPoll=5")
.to("mock:result");

Use KMS with the S3 component

To use AWS KMS to encrypt/decrypt data by using AWS infrastructure, you can use the options introduced in 2.21.x like in the following example

from("file:tmp/test?fileName=test.txt")
     .setHeader(AWS2S3Constants.KEY, constant("testFile"))
     .to("aws2-s3://mybucket?amazonS3Client=#client&useAwsKMS=true&awsKMSKeyId=3f0637ad-296a-3dfe-a796-e60654fb128c");

In this way, you’ll ask S3 to use the KMS key 3f0637ad-296a-3dfe-a796-e60654fb128c, to encrypt the file test.txt. When you ask to download this file, the decryption will be done directly before the download.

Static credentials, Default Credential Provider and Profile Credentials Provider

You have the possibility of avoiding the usage of explicit static credentials by specifying the useDefaultCredentialsProvider option and set it to true.

The order of evaluation for Default Credentials Provider is the following:

  • Java system properties - aws.accessKeyId and aws.secretKey.

  • Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

  • Web Identity Token from AWS STS.

  • The shared credentials and config files.

  • Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.

  • Amazon EC2 Instance profile credentials.

You have also the possibility of using Profile Credentials Provider, by specifying the useProfileCredentialsProvider option to true and profileCredentialsName to the profile name.

Only one of static, default and profile credentials could be used at the same time.

For more information about this you can look at AWS credentials documentation

S3 Producer Operation examples

  • Single Upload: This operation will upload a file to S3 based on the body content

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(AWS2S3Constants.KEY, "camel.txt");
          exchange.getIn().setBody("Camel rocks!");
      }
  })
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client")
  .to("mock:result");

This operation will upload the file camel.txt with the content "Camel rocks!" in the mycamelbucket bucket

  • Multipart Upload: This operation will perform a multipart upload of a file to S3 based on the body content

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(AWS2S3Constants.KEY, "empty.txt");
          exchange.getIn().setBody(new File("src/empty.txt"));
      }
  })
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&multiPartUpload=true&autoCreateBucket=true&partSize=1048576")
  .to("mock:result");

This operation will perform a multipart upload of the file empty.txt with based on the content the file src/empty.txt in the mycamelbucket bucket

  • CopyObject: this operation copies an object from one bucket to a different one

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(AWS2S3Constants.BUCKET_DESTINATION_NAME, "camelDestinationBucket");
          exchange.getIn().setHeader(AWS2S3Constants.KEY, "camelKey");
          exchange.getIn().setHeader(AWS2S3Constants.DESTINATION_KEY, "camelDestinationKey");
      }
  })
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&operation=copyObject")
  .to("mock:result");

This operation will copy the object with the name expressed in the header camelDestinationKey to the camelDestinationBucket bucket, from the bucket mycamelbucket.

  • DeleteObject: this operation deletes an object from a bucket

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(AWS2S3Constants.KEY, "camelKey");
      }
  })
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&operation=deleteObject")
  .to("mock:result");

This operation will delete the object camelKey from the bucket mycamelbucket.

  • ListBuckets: this operation lists the buckets for this account in this region

  from("direct:start")
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&operation=listBuckets")
  .to("mock:result");

This operation will list the buckets for this account

  • DeleteBucket: this operation deletes the bucket specified as URI parameter or header

  from("direct:start")
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&operation=deleteBucket")
  .to("mock:result");

This operation will delete the bucket mycamelbucket

  • ListObjects: this operation list object in a specific bucket

  from("direct:start")
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&operation=listObjects")
  .to("mock:result");

This operation will list the objects in the mycamelbucket bucket

  • GetObject: this operation gets a single object in a specific bucket

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(AWS2S3Constants.KEY, "camelKey");
      }
  })
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&operation=getObject")
  .to("mock:result");

This operation will return an S3Object instance related to the camelKey object in mycamelbucket bucket.

  • GetObjectRange: this operation gets a single object range in a specific bucket

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(AWS2S3Constants.KEY, "camelKey");
          exchange.getIn().setHeader(AWS2S3Constants.RANGE_START, "0");
          exchange.getIn().setHeader(AWS2S3Constants.RANGE_END, "9");
      }
  })
  .to("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&operation=getObjectRange")
  .to("mock:result");

This operation will return an S3Object instance related to the camelKey object in mycamelbucket bucket, containing the bytes from 0 to 9.

  • CreateDownloadLink: this operation will return a download link through S3 Presigner

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(AWS2S3Constants.KEY, "camelKey");
      }
  })
  .to("aws2-s3://mycamelbucket?accessKey=xxx&secretKey=yyy&region=region&operation=createDownloadLink")
  .to("mock:result");

This operation will return a download link url for the file camel-key in the bucket mycamelbucket and region region. Parameters (accessKey, secretKey and region) are mandatory for this operation, if S3 client is autowired from the registry.

If checksum validations are enabled, the url will no longer be browser compatible because it adds a signed header that must be included in the HTTP request.

Streaming Upload mode

With the stream mode enabled, users will be able to upload data to S3 without knowing ahead of time the dimension of the data, by leveraging multipart upload. The upload will be completed when the batchSize has been completed or the batchMessageNumber has been reached. There are two possible naming strategies: progressive and random. With the progressive strategy, each file will have the name composed by keyName option and a progressive counter, and eventually the file extension (if any), while with the random strategy a UUID will be added after keyName and eventually the file extension will be appended.

As an example:

from(kafka("topic1").brokers("localhost:9092"))
        .log("Kafka Message is: ${body}")
        .to(aws2S3("camel-bucket").streamingUploadMode(true).batchMessageNumber(25).namingStrategy(AWS2S3EndpointBuilderFactory.AWSS3NamingStrategyEnum.progressive).keyName("{{kafkaTopic1}}/{{kafkaTopic1}}.txt"));

from(kafka("topic2").brokers("localhost:9092"))
         .log("Kafka Message is: ${body}")
         .to(aws2S3("camel-bucket").streamingUploadMode(true).batchMessageNumber(25).namingStrategy(AWS2S3EndpointBuilderFactory.AWSS3NamingStrategyEnum.random).keyName("{{kafkaTopic2}}/{{kafkaTopic2}}.txt"));

The default size for a batch is 1 Mb, but you can adjust it according to your requirements.

When you stop your producer route, the producer will take care of flushing the remaining buffered message and complete the upload.

In Streaming upload, you’ll be able to restart the producer from the point where it left. It’s important to note that this feature is critical only when using the progressive naming strategy.

By setting the restartingPolicy to lastPart, you will restart uploading files and contents from the last part number the producer left.

As example: - Start the route with progressive naming strategy and keyname equals to camel.txt, with batchMessageNumber equals to 20, and restartingPolicy equals to lastPart - Send 70 messages. - Stop the route - On your S3 bucket you should now see four files: camel.txt, camel-1.txt, camel-2.txt and camel-3.txt, the first three will have 20 messages, while the last one is only 10. - Restart the route - Send 25 messages - Stop the route - You’ll now have two other files in your bucket: camel-5.txt and camel-6.txt, the first with 20 messages and the second with 5 messages. - Go ahead

This won’t be needed when using the random naming strategy.

On the opposite, you can specify the override restartingPolicy. In that case, you’ll be able to override whatever you written before (for that particular keyName) in your bucket.

In Streaming upload mode, the only keyName option that will be taken into account is the endpoint option. Using the header will throw an NPE and this is done by design. Setting the header means potentially change the file name on each exchange, and this is against the aim of the streaming upload producer. The keyName needs to be fixed and static. The selected naming strategy will do the rest of the work.

Another possibility is specifying a streamingUploadTimeout with batchMessageNumber and batchSize options. With this option, the user will be able to complete the upload of a file after a certain time passed. In this way, the upload completion will be passed on three tiers: the timeout, the number of messages and the batch size.

As an example:

from(kafka("topic1").brokers("localhost:9092"))
        .log("Kafka Message is: ${body}")
        .to(aws2S3("camel-bucket").streamingUploadMode(true).batchMessageNumber(25).streamingUploadTimeout(10000).namingStrategy(AWS2S3EndpointBuilderFactory.AWSS3NamingStrategyEnum.progressive).keyName("{{kafkaTopic1}}/{{kafkaTopic1}}.txt"));

In this case, the upload will be completed after 10 seconds.

Bucket Auto-creation

With the option autoCreateBucket users are able to avoid the auto-creation of an S3 Bucket in case it doesn’t exist. The default for this option is false. If set to false, any operation on a not-existent bucket in AWS won’t be successful and an error will be returned.

Moving stuff between a bucket and another bucket

Some users like to consume stuff from a bucket and move the content in a different one without using the copyObject feature of this component. If this is case for you, remember to remove the bucketName header from the incoming exchange of the consumer, otherwise the file will always be overwritten on the same original bucket.

MoveAfterRead consumer option

In addition to deleteAfterRead, it has been added another option, moveAfterRead. With this option enabled, the consumed object will be moved to a target destinationBucket instead of being only deleted. This will require specifying the destinationBucket option. As example:

  from("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&moveAfterRead=true&destinationBucket=myothercamelbucket")
  .to("mock:result");

In this case, the objects consumed will be moved to myothercamelbucket bucket and deleted from the original one (because of deleteAfterRead set to true as default).

You have also the possibility of using a key prefix/suffix while moving the file to a different bucket. The options are destinationBucketPrefix and destinationBucketSuffix.

Taking the above example, you could do something like:

  from("aws2-s3://mycamelbucket?amazonS3Client=#amazonS3Client&moveAfterRead=true&destinationBucket=myothercamelbucket&destinationBucketPrefix=RAW(pre-)&destinationBucketSuffix=RAW(-suff)")
  .to("mock:result");

In this case, the objects consumed will be moved to myothercamelbucket bucket and deleted from the original one (because of deleteAfterRead set to true as default).

So if the file name is test, in the myothercamelbucket you should see a file called pre-test-suff.

Using customer key as encryption

We introduced also the customer key support (an alternative of using KMS). The following code shows an example.

String key = UUID.randomUUID().toString();
byte[] secretKey = generateSecretKey();
String b64Key = Base64.getEncoder().encodeToString(secretKey);
String b64KeyMd5 = Md5Utils.md5AsBase64(secretKey);

String awsEndpoint = "aws2-s3://mycamel?autoCreateBucket=false&useCustomerKey=true&customerKeyId=RAW(" + b64Key + ")&customerKeyMD5=RAW(" + b64KeyMd5 + ")&customerAlgorithm=" + AES256.name();

from("direct:putObject")
    .setHeader(AWS2S3Constants.KEY, constant("test.txt"))
    .setBody(constant("Test"))
    .to(awsEndpoint);

Using a POJO as body

Sometimes building an AWS Request can be complex because of multiple options. We introduce the possibility to use a POJO as the body. In AWS S3 there are multiple operations you can submit, as an example for List brokers request, you can do something like:

from("direct:aws2-s3")
     .setBody(ListObjectsRequest.builder().bucket(bucketName).build())
     .to("aws2-s3://test?amazonS3Client=#amazonS3Client&operation=listObjects&pojoRequest=true")

In this way, you’ll pass the request directly without the need of passing headers and options specifically related to this operation.

Create S3 client and add component to registry

Sometimes you would want to perform some advanced configuration using AWS2S3Configuration, which also allows to set the S3 client. You can create and set the S3 client in the component configuration as shown in the following example

String awsBucketAccessKey = "your_access_key";
String awsBucketSecretKey = "your_secret_key";

S3Client s3Client = S3Client.builder().credentialsProvider(StaticCredentialsProvider.create(AwsBasicCredentials.create(awsBucketAccessKey, awsBucketSecretKey)))
                .region(Region.US_EAST_1).build();

AWS2S3Configuration configuration = new AWS2S3Configuration();
configuration.setAmazonS3Client(s3Client);
configuration.setAutoDiscoverClient(true);
configuration.setBucketName("s3bucket2020");
configuration.setRegion("us-east-1");

Now you can configure the S3 component (using the configuration object created above) and add it to the registry in the configure method before initialization of routes.

AWS2S3Component s3Component = new AWS2S3Component(getContext());
s3Component.setConfiguration(configuration);
s3Component.setLazyStartProducer(true);
camelContext.addComponent("aws2-s3", s3Component);

Now your component will be used for all the operations implemented in camel routes.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws2-s3</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws2-s3 with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws2-s3-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 60 options, which are listed below.

Name Description Default Type

camel.component.aws2-s3.access-key

Amazon AWS Access Key.

String

camel.component.aws2-s3.amazon-s3-client

Reference to a com.amazonaws.services.s3.AmazonS3 in the registry. The option is a software.amazon.awssdk.services.s3.S3Client type.

S3Client

camel.component.aws2-s3.amazon-s3-presigner

An S3 Presigner for Request, used mainly in createDownloadLink operation. The option is a software.amazon.awssdk.services.s3.presigner.S3Presigner type.

S3Presigner

camel.component.aws2-s3.auto-create-bucket

Setting the autocreation of the S3 bucket bucketName. This will apply also in case of moveAfterRead option enabled, and it will create the destinationBucket if it doesn’t exist already.

false

Boolean

camel.component.aws2-s3.autoclose-body

If this option is true and includeBody is false, then the S3Object.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to false and autocloseBody to false, it will be up to the caller to close the S3Object stream. Setting autocloseBody to true, will close the S3Object stream automatically.

true

Boolean

camel.component.aws2-s3.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-s3.aws-k-m-s-key-id

Define the id of KMS key to use in case KMS is enabled.

String

camel.component.aws2-s3.batch-message-number

The number of messages composing a batch in streaming upload mode.

10

Integer

camel.component.aws2-s3.batch-size

The batch size (in bytes) in streaming upload mode.

1000000

Integer

camel.component.aws2-s3.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.aws2-s3.buffer-size

The buffer size (in bytes) in streaming upload mode.

1000000

Integer

camel.component.aws2-s3.configuration

The component configuration. The option is a org.apache.camel.component.aws2.s3.AWS2S3Configuration type.

AWS2S3Configuration

camel.component.aws2-s3.customer-algorithm

Define the customer algorithm to use in case CustomerKey is enabled.

String

camel.component.aws2-s3.customer-key-id

Define the id of the Customer key to use in case CustomerKey is enabled.

String

camel.component.aws2-s3.customer-key-m-d5

Define the MD5 of Customer key to use in case CustomerKey is enabled.

String

camel.component.aws2-s3.delete-after-read

Delete objects from S3 after they have been retrieved. The deleting is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieved over and over again in the polls. Therefore, you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the AWS2S3Constants#BUCKET_NAME and AWS2S3Constants#KEY headers, or only the AWS2S3Constants#KEY header.

true

Boolean

camel.component.aws2-s3.delete-after-write

Delete file object after the S3 file has been uploaded.

false

Boolean

camel.component.aws2-s3.delimiter

The delimiter which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only consume objects we are interested in.

String

camel.component.aws2-s3.destination-bucket

Define the destination bucket where an object must be moved when moveAfterRead is set to true.

String

camel.component.aws2-s3.destination-bucket-prefix

Define the destination bucket prefix to use when an object must be moved, and moveAfterRead is set to true.

String

camel.component.aws2-s3.destination-bucket-suffix

Define the destination bucket suffix to use when an object must be moved, and moveAfterRead is set to true.

String

camel.component.aws2-s3.done-file-name

If provided, Camel will only consume files if a done file exists.

String

camel.component.aws2-s3.enabled

Whether to enable auto configuration of the aws2-s3 component. This is enabled by default.

Boolean

camel.component.aws2-s3.file-name

To get the object from the bucket with the given file name.

String

camel.component.aws2-s3.force-path-style

Set whether the S3 client should use path-style URL instead of virtual-hosted-style.

false

Boolean

camel.component.aws2-s3.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws2-s3.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws2-s3.ignore-body

If it is true, the S3 Object Body will be ignored completely if it is set to false, the S3 Object will be put in the body. Setting this to true will override any behavior defined by includeBody option.

false

Boolean

camel.component.aws2-s3.include-body

If it is true, the S3Object exchange will be consumed and put into the body and closed. If false, the S3Object stream will be put raw into the body and the headers will be set with the S3 object metadata. This option is strongly related to the autocloseBody option. In case of setting includeBody to true because the S3Object stream will be consumed then it will also be closed, while in case of includeBody false then it will be up to the caller to close the S3Object stream. However, setting autocloseBody to true when includeBody is false it will schedule to close the S3Object stream automatically on exchange completion.

true

Boolean

camel.component.aws2-s3.include-folders

If it is true, the folders/directories will be consumed. If it is false, they will be ignored, and Exchanges will not be created for those.

true

Boolean

camel.component.aws2-s3.key-name

Setting the key name for an element in the bucket through endpoint parameter.

String

camel.component.aws2-s3.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-s3.move-after-read

Move objects from S3 bucket to a different bucket after they have been retrieved. To accomplish the operation, the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.

false

Boolean

camel.component.aws2-s3.multi-part-upload

If it is true, camel will upload the file with multipart format. The part size is decided by the partSize option. Camel will only do multipart uploads for files that are larger than the part-size thresholds. Files that are smaller will be uploaded in a single operation.

false

Boolean

camel.component.aws2-s3.naming-strategy

The naming strategy to use in streaming upload mode.

AWSS3NamingStrategyEnum

camel.component.aws2-s3.operation

The operation to do in case the user don’t want to do only an upload.

AWS2S3Operations

camel.component.aws2-s3.override-endpoint

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

Boolean

camel.component.aws2-s3.part-size

Set up the partSize which is used in multipart upload, the default size is 25M. Camel will only do multipart uploads for files that are larger than the part-size thresholds. Files that are smaller will be uploaded in a single operation.

26214400

Long

camel.component.aws2-s3.pojo-request

If we want to use a POJO request as body or not.

false

Boolean

camel.component.aws2-s3.policy

The policy for this queue to set in the com.amazonaws.services.s3.AmazonS3#setBucketPolicy() method.

String

camel.component.aws2-s3.prefix

The prefix which is used in the com.amazonaws.services.s3.model.ListObjectsRequest to only consume objects we are interested in.

String

camel.component.aws2-s3.profile-credentials-name

If using a profile credentials provider, this parameter will set the profile name.

String

camel.component.aws2-s3.proxy-host

To define a proxy host when instantiating the SQS client.

String

camel.component.aws2-s3.proxy-port

Specify a proxy port to be used inside the client definition.

Integer

camel.component.aws2-s3.proxy-protocol

To define a proxy protocol when instantiating the S3 client.

Protocol

camel.component.aws2-s3.region

The region in which the S3 client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws2-s3.restarting-policy

The restarting policy to use in streaming upload mode.

AWSS3RestartingPolicyEnum

camel.component.aws2-s3.secret-key

Amazon AWS Secret Key.

String

camel.component.aws2-s3.session-token

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

camel.component.aws2-s3.storage-class

The storage class to set in the com.amazonaws.services.s3.model.PutObjectRequest request.

String

camel.component.aws2-s3.streaming-upload-mode

When stream mode is true, the upload to bucket will be done in streaming.

false

Boolean

camel.component.aws2-s3.streaming-upload-timeout

While streaming upload mode is true, this option set the timeout to complete upload.

Long

camel.component.aws2-s3.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws2-s3.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws2-s3.use-aws-k-m-s

Define if KMS must be used or not.

false

Boolean

camel.component.aws2-s3.use-customer-key

Define if Customer Key must be used or not.

false

Boolean

camel.component.aws2-s3.use-default-credentials-provider

Set whether the S3 client should expect to load credentials through a default credentials provider.

false

Boolean

camel.component.aws2-s3.use-profile-credentials-provider

Set whether the S3 client should expect to load credentials through a profile credentials provider.

false

Boolean

camel.component.aws2-s3.use-s-s-e-s3

Define if SSE S3 must be used or not.

false

Boolean

camel.component.aws2-s3.use-session-credentials

Set whether the S3 client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in S3.

false

Boolean