Twilio

Since Camel 2.20

Both producer and consumer are supported

The Twilio component provides access to Version 2010-04-01 of Twilio REST APIs accessible using Twilio Java SDK.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-twilio</artifactId>
    <version>${camel-version}</version>
</dependency>

Twilio Options

The Twilio component supports 8 options, which are listed below.

Name Description Default Type

configuration (common)

To use the shared configuration

TwilioConfiguration

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Deprecated Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

restClient (advanced)

To use the shared REST client

TwilioRestClient

accountSid (security)

The account SID to use.

String

password (security)

Auth token for the account.

String

username (security)

The account to use.

String

The Twilio endpoint is configured using URI syntax:

twilio:apiName/methodName

with the following path and query parameters:

Path Parameters (2 parameters):

Name Description Default Type

apiName

Required What kind of operation to perform. There are 56 enums and the value can be one of: ACCOUNT, ADDRESS, APPLICATION, AVAILABLE_PHONE_NUMBER_COUNTRY, CALL, CONFERENCE, CONNECT_APP, INCOMING_PHONE_NUMBER, KEY, MESSAGE, NEW_KEY, NEW_SIGNING_KEY, NOTIFICATION, OUTGOING_CALLER_ID, QUEUE, RECORDING, SHORT_CODE, SIGNING_KEY, TOKEN, TRANSCRIPTION, VALIDATION_REQUEST, ADDRESS_DEPENDENT_PHONE_NUMBER, AVAILABLE_PHONE_NUMBER_COUNTRY_LOCAL, AVAILABLE_PHONE_NUMBER_COUNTRY_MOBILE, AVAILABLE_PHONE_NUMBER_COUNTRY_TOLL_FREE, CALL_FEEDBACK, CALL_FEEDBACK_SUMMARY, CALL_NOTIFICATION, CALL_RECORDING, CONFERENCE_PARTICIPANT, INCOMING_PHONE_NUMBER_LOCAL, INCOMING_PHONE_NUMBER_MOBILE, INCOMING_PHONE_NUMBER_TOLL_FREE, MESSAGE_FEEDBACK, MESSAGE_MEDIA, QUEUE_MEMBER, RECORDING_ADD_ON_RESULT, RECORDING_TRANSCRIPTION, RECORDING_ADD_ON_RESULT_PAYLOAD, SIP_CREDENTIAL_LIST, SIP_DOMAIN, SIP_IP_ACCESS_CONTROL_LIST, SIP_CREDENTIAL_LIST_CREDENTIAL, SIP_DOMAIN_CREDENTIAL_LIST_MAPPING, SIP_DOMAIN_IP_ACCESS_CONTROL_LIST_MAPPING, SIP_IP_ACCESS_CONTROL_LIST_IP_ADDRESS, USAGE_RECORD, USAGE_TRIGGER, USAGE_RECORD_ALL_TIME, USAGE_RECORD_DAILY, USAGE_RECORD_LAST_MONTH, USAGE_RECORD_MONTHLY, USAGE_RECORD_THIS_MONTH, USAGE_RECORD_TODAY, USAGE_RECORD_YEARLY, USAGE_RECORD_YESTERDAY

TwilioApiName

methodName

Required What sub operation to use for the selected operation. There are 5 enums and the value can be one of: create, delete, fetch, read, update

String

Query Parameters (23 parameters):

Name Description Default Type

inBody (common)

Sets the name of a parameter to be passed in the exchange In Body

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

pollStrategy (consumer)

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options. There are 7 enums and the value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

API Parameters (56 APIs):

The Twilio endpoint is an API based component and has additional parameters based on which API name and API method is used. The API name and API method is located in the endpoint URI as the apiName/methodName path parameters:

twilio:apiName/methodName

There are 56 API names as listed in the table below:

API Name Type Description

account

Both

address

Both

address-dependent-phone-number

Both

application

Both

available-phone-number-country

Both

available-phone-number-country-local

Both

available-phone-number-country-mobile

Both

available-phone-number-country-toll-free

Both

call

Both

call-feedback

Both

call-feedback-summary

Both

call-notification

Both

call-recording

Both

conference

Both

conference-participant

Both

connect-app

Both

incoming-phone-number

Both

incoming-phone-number-local

Both

incoming-phone-number-mobile

Both

incoming-phone-number-toll-free

Both

key

Both

message

Both

message-feedback

Both

message-media

Both

new-key

Both

new-signing-key

Both

notification

Both

outgoing-caller-id

Both

queue

Both

queue-member

Both

recording

Both

recording-add-on-result

Both

recording-add-on-result-payload

Both

recording-transcription

Both

short-code

Both

signing-key

Both

sip-credential-list

Both

sip-credential-list-credential

Both

sip-domain

Both

sip-domain-credential-list-mapping

Both

sip-domain-ip-access-control-list-mapping

Both

sip-ip-access-control-list

Both

sip-ip-access-control-list-ip-address

Both

token

Both

transcription

Both

usage-record

Both

usage-record-all-time

Both

usage-record-daily

Both

usage-record-last-month

Both

usage-record-monthly

Both

usage-record-this-month

Both

usage-record-today

Both

usage-record-yearly

Both

usage-record-yesterday

Both

usage-trigger

Both

validation-request

Both

Each API is documented in the following sections to come.

API: account

Both producer and consumer are supported

The account API has 2 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.AccountFetcher fetcher();

com.twilio.rest.api.v2010.AccountFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.AccountUpdater updater();

com.twilio.rest.api.v2010.AccountUpdater updater(String pathSid);

The account API is defined in the syntax as follows:

twilio:account/methodName?[parameters]

The 2 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

fetcher

fetch

Create a AccountFetcher to execute fetch

updater

update

Create a AccountUpdater to execute update

The account API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

fetcher

pathSid

Fetch by unique Account Sid

String

updater

pathSid

Update by unique Account Sid

String

In addition to the parameters above, the account API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: address

Both producer and consumer are supported

The address API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.AddressCreator creator(String customerName, String street, String city, String region, String postalCode, String isoCountry);

com.twilio.rest.api.v2010.account.AddressCreator creator(String pathAccountSid, String customerName, String street, String city, String region, String postalCode, String isoCountry);

com.twilio.rest.api.v2010.account.AddressDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.AddressDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.AddressFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.AddressFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.AddressReader reader();

com.twilio.rest.api.v2010.account.AddressReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.AddressUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.AddressUpdater updater(String pathSid);

The address API is defined in the syntax as follows:

twilio:address/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a AddressCreator to execute create

deleter

delete

Create a AddressDeleter to execute delete

fetcher

fetch

Create a AddressFetcher to execute fetch

reader

read

Create a AddressReader to execute read

updater

update

Create a AddressUpdater to execute update

The address API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

city

The city of the new address

String

creator

customerName

The name to associate with the new address

String

creator

isoCountry

The ISO country code of the new address

String

creator

pathAccountSid

The SID of the Account that will be responsible for the new Address resource

String

creator

postalCode

The postal code of the new address

String

creator

region

The state or region of the new address

String

creator

street

The number and street address of the new address

String

deleter

pathAccountSid

The SID of the Account that is responsible for the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that is responsible for this address

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that is responsible for this address

String

updater

pathAccountSid

The SID of the Account that is responsible for the resource to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the address API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: address-dependent-phone-number

Both producer and consumer are supported

The address-dependent-phone-number API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.address.DependentPhoneNumberReader reader(String pathAccountSid, String pathAddressSid);

com.twilio.rest.api.v2010.account.address.DependentPhoneNumberReader reader(String pathAddressSid);

The address-dependent-phone-number API is defined in the syntax as follows:

twilio:address-dependent-phone-number/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a DependentPhoneNumberReader to execute read

The address-dependent-phone-number API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

reader

pathAddressSid

The SID of the Address resource associated with the phone number

String

In addition to the parameters above, the address-dependent-phone-number API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: application

Both producer and consumer are supported

The application API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.ApplicationCreator creator();

com.twilio.rest.api.v2010.account.ApplicationCreator creator(String pathAccountSid);

com.twilio.rest.api.v2010.account.ApplicationDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ApplicationDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.ApplicationFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ApplicationFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.ApplicationReader reader();

com.twilio.rest.api.v2010.account.ApplicationReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.ApplicationUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ApplicationUpdater updater(String pathSid);

The application API is defined in the syntax as follows:

twilio:application/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a ApplicationCreator to execute create

deleter

delete

Create a ApplicationDeleter to execute delete

fetcher

fetch

Create a ApplicationFetcher to execute fetch

reader

read

Create a ApplicationReader to execute read

updater

update

Create a ApplicationUpdater to execute update

The application API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will create the resource

String

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

pathAccountSid

The SID of the Account that will create the resource

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the application API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: available-phone-number-country

Both producer and consumer are supported

The available-phone-number-country API has 2 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.AvailablePhoneNumberCountryFetcher fetcher(String pathAccountSid, String pathCountryCode);

com.twilio.rest.api.v2010.account.AvailablePhoneNumberCountryFetcher fetcher(String pathCountryCode);

com.twilio.rest.api.v2010.account.AvailablePhoneNumberCountryReader reader();

com.twilio.rest.api.v2010.account.AvailablePhoneNumberCountryReader reader(String pathAccountSid);

The available-phone-number-country API is defined in the syntax as follows:

twilio:available-phone-number-country/methodName?[parameters]

The 2 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

fetcher

fetch

Create a AvailablePhoneNumberCountryFetcher to execute fetch

reader

read

Create a AvailablePhoneNumberCountryReader to execute read

The available-phone-number-country API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

fetcher

pathAccountSid

The SID of the Account requesting the available phone number Country resource

String

fetcher

pathCountryCode

The ISO country code of the country to fetch available phone number information about

String

reader

pathAccountSid

The SID of the Account requesting the available phone number Country resources

String

In addition to the parameters above, the available-phone-number-country API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: available-phone-number-country-local

Both producer and consumer are supported

The available-phone-number-country-local API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.availablephonenumbercountry.LocalReader reader(String pathAccountSid, String pathCountryCode);

com.twilio.rest.api.v2010.account.availablephonenumbercountry.LocalReader reader(String pathCountryCode);

The available-phone-number-country-local API is defined in the syntax as follows:

twilio:available-phone-number-country-local/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a LocalReader to execute read

The available-phone-number-country-local API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account requesting the AvailablePhoneNumber resources

String

reader

pathCountryCode

The ISO Country code of the country from which to read phone numbers

String

In addition to the parameters above, the available-phone-number-country-local API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: available-phone-number-country-mobile

Both producer and consumer are supported

The available-phone-number-country-mobile API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.availablephonenumbercountry.MobileReader reader(String pathAccountSid, String pathCountryCode);

com.twilio.rest.api.v2010.account.availablephonenumbercountry.MobileReader reader(String pathCountryCode);

The available-phone-number-country-mobile API is defined in the syntax as follows:

twilio:available-phone-number-country-mobile/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a MobileReader to execute read

The available-phone-number-country-mobile API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account requesting the AvailablePhoneNumber resources

String

reader

pathCountryCode

The ISO Country code of the country from which to read phone numbers

String

In addition to the parameters above, the available-phone-number-country-mobile API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: available-phone-number-country-toll-free

Both producer and consumer are supported

The available-phone-number-country-toll-free API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.availablephonenumbercountry.TollFreeReader reader(String pathAccountSid, String pathCountryCode);

com.twilio.rest.api.v2010.account.availablephonenumbercountry.TollFreeReader reader(String pathCountryCode);

The available-phone-number-country-toll-free API is defined in the syntax as follows:

twilio:available-phone-number-country-toll-free/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a TollFreeReader to execute read

The available-phone-number-country-toll-free API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account requesting the AvailablePhoneNumber resources

String

reader

pathCountryCode

The ISO Country code of the country from which to read phone numbers

String

In addition to the parameters above, the available-phone-number-country-toll-free API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: call

Both producer and consumer are supported

The call API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.CallCreator creator(String pathAccountSid, com.twilio.type.Endpoint to, com.twilio.type.Endpoint from, String applicationSid);

com.twilio.rest.api.v2010.account.CallCreator creator(String pathAccountSid, com.twilio.type.Endpoint to, com.twilio.type.Endpoint from, com.twilio.type.Twiml twiml);

com.twilio.rest.api.v2010.account.CallCreator creator(String pathAccountSid, com.twilio.type.Endpoint to, com.twilio.type.Endpoint from, java.net.URI url);

com.twilio.rest.api.v2010.account.CallCreator creator(com.twilio.type.Endpoint to, com.twilio.type.Endpoint from, String applicationSid);

com.twilio.rest.api.v2010.account.CallCreator creator(com.twilio.type.Endpoint to, com.twilio.type.Endpoint from, com.twilio.type.Twiml twiml);

com.twilio.rest.api.v2010.account.CallCreator creator(com.twilio.type.Endpoint to, com.twilio.type.Endpoint from, java.net.URI url);

com.twilio.rest.api.v2010.account.CallDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.CallDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.CallFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.CallFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.CallReader reader();

com.twilio.rest.api.v2010.account.CallReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.CallUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.CallUpdater updater(String pathSid);

The call API is defined in the syntax as follows:

twilio:call/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a CallCreator to execute create

deleter

delete

Create a CallDeleter to execute delete

fetcher

fetch

Create a CallFetcher to execute fetch

reader

read

Create a CallReader to execute read

updater

update

Create a CallUpdater to execute update

The call API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

applicationSid

The SID of the Application resource that will handle the call

String

creator

from

Twilio number from which to originate the call

Endpoint

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

to

Phone number, SIP address, or client identifier to call

Endpoint

creator

twiml

TwiML instructions for the call

Twiml

creator

url

The absolute URL that returns TwiML for this call

URI

deleter

pathAccountSid

The SID of the Account that created the resource(s) to delete

String

deleter

pathSid

The unique string that identifies this resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource(s) to fetch

String

fetcher

pathSid

The SID of the Call resource to fetch

String

reader

pathAccountSid

The SID of the Account that created the resource(s) to read

String

updater

pathAccountSid

The SID of the Account that created the resource(s) to update

String

updater

pathSid

The unique string that identifies this resource

String

In addition to the parameters above, the call API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: call-feedback

Both producer and consumer are supported

The call-feedback API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.call.FeedbackCreator creator(String pathAccountSid, String pathCallSid, Integer qualityScore);

com.twilio.rest.api.v2010.account.call.FeedbackCreator creator(String pathCallSid, Integer qualityScore);

com.twilio.rest.api.v2010.account.call.FeedbackFetcher fetcher(String pathAccountSid, String pathCallSid);

com.twilio.rest.api.v2010.account.call.FeedbackFetcher fetcher(String pathCallSid);

com.twilio.rest.api.v2010.account.call.FeedbackUpdater updater(String pathAccountSid, String pathCallSid, Integer qualityScore);

com.twilio.rest.api.v2010.account.call.FeedbackUpdater updater(String pathCallSid, Integer qualityScore);

The call-feedback API is defined in the syntax as follows:

twilio:call-feedback/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a FeedbackCreator to execute create

fetcher

fetch

Create a FeedbackFetcher to execute fetch

updater

update

Create a FeedbackUpdater to execute update

The call-feedback API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The unique sid that identifies this account

String

creator

pathCallSid

The call sid that uniquely identifies the call

String

creator

qualityScore

The call quality expressed as an integer from 1 to 5

Integer

fetcher

pathAccountSid

The unique sid that identifies this account

String

fetcher

pathCallSid

The call sid that uniquely identifies the call

String

updater

pathAccountSid

The unique sid that identifies this account

String

updater

pathCallSid

The call sid that uniquely identifies the call

String

updater

qualityScore

The call quality expressed as an integer from 1 to 5

Integer

In addition to the parameters above, the call-feedback API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: call-feedback-summary

Both producer and consumer are supported

The call-feedback-summary API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.call.FeedbackSummaryCreator creator(String pathAccountSid, org.joda.time.LocalDate startDate, org.joda.time.LocalDate endDate);

com.twilio.rest.api.v2010.account.call.FeedbackSummaryCreator creator(org.joda.time.LocalDate startDate, org.joda.time.LocalDate endDate);

com.twilio.rest.api.v2010.account.call.FeedbackSummaryDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.call.FeedbackSummaryDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.call.FeedbackSummaryFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.call.FeedbackSummaryFetcher fetcher(String pathSid);

The call-feedback-summary API is defined in the syntax as follows:

twilio:call-feedback-summary/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a FeedbackSummaryCreator to execute create

deleter

delete

Create a FeedbackSummaryDeleter to execute delete

fetcher

fetch

Create a FeedbackSummaryFetcher to execute fetch

The call-feedback-summary API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

endDate

Only include feedback given on or before this date

LocalDate

creator

pathAccountSid

The unique sid that identifies this account

String

creator

startDate

Only include feedback given on or after this date

LocalDate

deleter

pathAccountSid

The unique sid that identifies this account

String

deleter

pathSid

A string that uniquely identifies this feedback summary resource

String

fetcher

pathAccountSid

The unique sid that identifies this account

String

fetcher

pathSid

A string that uniquely identifies this feedback summary resource

String

In addition to the parameters above, the call-feedback-summary API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: call-notification

Both producer and consumer are supported

The call-notification API has 2 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.call.NotificationFetcher fetcher(String pathAccountSid, String pathCallSid, String pathSid);

com.twilio.rest.api.v2010.account.call.NotificationFetcher fetcher(String pathCallSid, String pathSid);

com.twilio.rest.api.v2010.account.call.NotificationReader reader(String pathAccountSid, String pathCallSid);

com.twilio.rest.api.v2010.account.call.NotificationReader reader(String pathCallSid);

The call-notification API is defined in the syntax as follows:

twilio:call-notification/methodName?[parameters]

The 2 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

fetcher

fetch

Create a NotificationFetcher to execute fetch

reader

read

Create a NotificationReader to execute read

The call-notification API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathCallSid

The Call SID of the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

reader

pathCallSid

The Call SID of the resource to fetch

String

In addition to the parameters above, the call-notification API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: call-recording

Both producer and consumer are supported

The call-recording API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.call.RecordingCreator creator(String pathAccountSid, String pathCallSid);

com.twilio.rest.api.v2010.account.call.RecordingCreator creator(String pathCallSid);

com.twilio.rest.api.v2010.account.call.RecordingDeleter deleter(String pathAccountSid, String pathCallSid, String pathSid);

com.twilio.rest.api.v2010.account.call.RecordingDeleter deleter(String pathCallSid, String pathSid);

com.twilio.rest.api.v2010.account.call.RecordingFetcher fetcher(String pathAccountSid, String pathCallSid, String pathSid);

com.twilio.rest.api.v2010.account.call.RecordingFetcher fetcher(String pathCallSid, String pathSid);

com.twilio.rest.api.v2010.account.call.RecordingReader reader(String pathAccountSid, String pathCallSid);

com.twilio.rest.api.v2010.account.call.RecordingReader reader(String pathCallSid);

com.twilio.rest.api.v2010.account.call.RecordingUpdater updater(String pathAccountSid, String pathCallSid, String pathSid, com.twilio.rest.api.v2010.account.call.Recording.Status status);

com.twilio.rest.api.v2010.account.call.RecordingUpdater updater(String pathCallSid, String pathSid, com.twilio.rest.api.v2010.account.call.Recording.Status status);

The call-recording API is defined in the syntax as follows:

twilio:call-recording/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a RecordingCreator to execute create

deleter

delete

Create a RecordingDeleter to execute delete

fetcher

fetch

Create a RecordingFetcher to execute fetch

reader

read

Create a RecordingReader to execute read

updater

update

Create a RecordingUpdater to execute update

The call-recording API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

pathCallSid

The SID of the Call to associate the resource with

String

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathCallSid

The SID of the Call to associate the resource with

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathCallSid

The SID of the Call to associate the resource with

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

reader

pathCallSid

The SID of the Call to associate the resource with

String

updater

pathAccountSid

The SID of the Account that created the resource to update

String

updater

pathCallSid

The SID of the Call to associate the resource with

String

updater

pathSid

The unique string that identifies the resource

String

updater

status

The new status of the recording

Status

In addition to the parameters above, the call-recording API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: conference

Both producer and consumer are supported

The conference API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.ConferenceFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ConferenceFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.ConferenceReader reader();

com.twilio.rest.api.v2010.account.ConferenceReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.ConferenceUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ConferenceUpdater updater(String pathSid);

The conference API is defined in the syntax as follows:

twilio:conference/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

fetcher

fetch

Create a ConferenceFetcher to execute fetch

reader

read

Create a ConferenceReader to execute read

updater

update

Create a ConferenceUpdater to execute update

The conference API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

fetcher

pathAccountSid

The SID of the Account that created the resource(s) to fetch

String

fetcher

pathSid

The unique string that identifies this resource

String

reader

pathAccountSid

The SID of the Account that created the resource(s) to read

String

updater

pathAccountSid

The SID of the Account that created the resource(s) to update

String

updater

pathSid

The unique string that identifies this resource

String

In addition to the parameters above, the conference API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: conference-participant

Both producer and consumer are supported

The conference-participant API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.conference.ParticipantCreator creator(String pathAccountSid, String pathConferenceSid, com.twilio.type.PhoneNumber from, com.twilio.type.PhoneNumber to);

com.twilio.rest.api.v2010.account.conference.ParticipantCreator creator(String pathConferenceSid, com.twilio.type.PhoneNumber from, com.twilio.type.PhoneNumber to);

com.twilio.rest.api.v2010.account.conference.ParticipantDeleter deleter(String pathAccountSid, String pathConferenceSid, String pathCallSid);

com.twilio.rest.api.v2010.account.conference.ParticipantDeleter deleter(String pathConferenceSid, String pathCallSid);

com.twilio.rest.api.v2010.account.conference.ParticipantFetcher fetcher(String pathAccountSid, String pathConferenceSid, String pathCallSid);

com.twilio.rest.api.v2010.account.conference.ParticipantFetcher fetcher(String pathConferenceSid, String pathCallSid);

com.twilio.rest.api.v2010.account.conference.ParticipantReader reader(String pathAccountSid, String pathConferenceSid);

com.twilio.rest.api.v2010.account.conference.ParticipantReader reader(String pathConferenceSid);

com.twilio.rest.api.v2010.account.conference.ParticipantUpdater updater(String pathAccountSid, String pathConferenceSid, String pathCallSid);

com.twilio.rest.api.v2010.account.conference.ParticipantUpdater updater(String pathConferenceSid, String pathCallSid);

The conference-participant API is defined in the syntax as follows:

twilio:conference-participant/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a ParticipantCreator to execute create

deleter

delete

Create a ParticipantDeleter to execute delete

fetcher

fetch

Create a ParticipantFetcher to execute fetch

reader

read

Create a ParticipantReader to execute read

updater

update

Create a ParticipantUpdater to execute update

The conference-participant API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

from

The phone number, Client identifier, or username portion of SIP address that made this call.

PhoneNumber

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

pathConferenceSid

The SID of the participant’s conference

String

creator

to

The phone number, SIP address or Client identifier that received this call.

PhoneNumber

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathCallSid

The Call SID or URL encoded label of the participant to delete

String

deleter

pathConferenceSid

The SID of the participant’s conference

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathCallSid

The Call SID or URL encoded label of the participant to fetch

String

fetcher

pathConferenceSid

The SID of the participant’s conference

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

reader

pathConferenceSid

The SID of the participant’s conference

String

updater

pathAccountSid

The SID of the Account that created the resources to update

String

updater

pathCallSid

The Call SID or URL encoded label of the participant to update

String

updater

pathConferenceSid

The SID of the participant’s conference

String

In addition to the parameters above, the conference-participant API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: connect-app

Both producer and consumer are supported

The connect-app API has 4 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.ConnectAppDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ConnectAppDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.ConnectAppFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ConnectAppFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.ConnectAppReader reader();

com.twilio.rest.api.v2010.account.ConnectAppReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.ConnectAppUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ConnectAppUpdater updater(String pathSid);

The connect-app API is defined in the syntax as follows:

twilio:connect-app/methodName?[parameters]

The 4 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a ConnectAppDeleter to execute delete

fetcher

fetch

Create a ConnectAppFetcher to execute fetch

reader

read

Create a ConnectAppReader to execute read

updater

update

Create a ConnectAppUpdater to execute update

The connect-app API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resource to fetch

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

pathAccountSid

The SID of the Account that created the resources to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the connect-app API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: incoming-phone-number

Both producer and consumer are supported

The incoming-phone-number API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.IncomingPhoneNumberCreator creator(String areaCode);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberCreator creator(String pathAccountSid, String areaCode);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberCreator creator(com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberReader reader();

com.twilio.rest.api.v2010.account.IncomingPhoneNumberReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.IncomingPhoneNumberUpdater updater(String pathSid);

The incoming-phone-number API is defined in the syntax as follows:

twilio:incoming-phone-number/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a IncomingPhoneNumberCreator to execute create

deleter

delete

Create a IncomingPhoneNumberDeleter to execute delete

fetcher

fetch

Create a IncomingPhoneNumberFetcher to execute fetch

reader

read

Create a IncomingPhoneNumberReader to execute read

updater

update

Create a IncomingPhoneNumberUpdater to execute update

The incoming-phone-number API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

areaCode

The desired area code for the new phone number

String

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

phoneNumber

The phone number to purchase in E.164 format

PhoneNumber

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

pathAccountSid

The SID of the Account that created the resource to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the incoming-phone-number API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: incoming-phone-number-local

Both producer and consumer are supported

The incoming-phone-number-local API has 2 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.incomingphonenumber.LocalCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.incomingphonenumber.LocalCreator creator(com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.incomingphonenumber.LocalReader reader();

com.twilio.rest.api.v2010.account.incomingphonenumber.LocalReader reader(String pathAccountSid);

The incoming-phone-number-local API is defined in the syntax as follows:

twilio:incoming-phone-number-local/methodName?[parameters]

The 2 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a LocalCreator to execute create

reader

read

Create a LocalReader to execute read

The incoming-phone-number-local API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

phoneNumber

The phone number to purchase in E.164 format

PhoneNumber

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the incoming-phone-number-local API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: incoming-phone-number-mobile

Both producer and consumer are supported

The incoming-phone-number-mobile API has 2 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.incomingphonenumber.MobileCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.incomingphonenumber.MobileCreator creator(com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.incomingphonenumber.MobileReader reader();

com.twilio.rest.api.v2010.account.incomingphonenumber.MobileReader reader(String pathAccountSid);

The incoming-phone-number-mobile API is defined in the syntax as follows:

twilio:incoming-phone-number-mobile/methodName?[parameters]

The 2 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a MobileCreator to execute create

reader

read

Create a MobileReader to execute read

The incoming-phone-number-mobile API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

phoneNumber

The phone number to purchase in E.164 format

PhoneNumber

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the incoming-phone-number-mobile API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: incoming-phone-number-toll-free

Both producer and consumer are supported

The incoming-phone-number-toll-free API has 2 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.incomingphonenumber.TollFreeCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.incomingphonenumber.TollFreeCreator creator(com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.incomingphonenumber.TollFreeReader reader();

com.twilio.rest.api.v2010.account.incomingphonenumber.TollFreeReader reader(String pathAccountSid);

The incoming-phone-number-toll-free API is defined in the syntax as follows:

twilio:incoming-phone-number-toll-free/methodName?[parameters]

The 2 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a TollFreeCreator to execute create

reader

read

Create a TollFreeReader to execute read

The incoming-phone-number-toll-free API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

phoneNumber

The phone number to purchase in E.164 format

PhoneNumber

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the incoming-phone-number-toll-free API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: key

Both producer and consumer are supported

The key API has 4 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.KeyDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.KeyDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.KeyFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.KeyFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.KeyReader reader();

com.twilio.rest.api.v2010.account.KeyReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.KeyUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.KeyUpdater updater(String pathSid);

The key API is defined in the syntax as follows:

twilio:key/methodName?[parameters]

The 4 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a KeyDeleter to execute delete

fetcher

fetch

Create a KeyFetcher to execute fetch

reader

read

Create a KeyReader to execute read

updater

update

Create a KeyUpdater to execute update

The key API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

pathAccountSid

The SID of the Account that created the resources to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the key API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: message

Both producer and consumer are supported

The message API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.MessageCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber to, String messagingServiceSid, String body);

com.twilio.rest.api.v2010.account.MessageCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber to, String messagingServiceSid, java.util.List<java.net.URI> mediaUrl);

com.twilio.rest.api.v2010.account.MessageCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber to, com.twilio.type.PhoneNumber from, String body);

com.twilio.rest.api.v2010.account.MessageCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber to, com.twilio.type.PhoneNumber from, java.util.List<java.net.URI> mediaUrl);

com.twilio.rest.api.v2010.account.MessageCreator creator(com.twilio.type.PhoneNumber to, String messagingServiceSid, String body);

com.twilio.rest.api.v2010.account.MessageCreator creator(com.twilio.type.PhoneNumber to, String messagingServiceSid, java.util.List<java.net.URI> mediaUrl);

com.twilio.rest.api.v2010.account.MessageCreator creator(com.twilio.type.PhoneNumber to, com.twilio.type.PhoneNumber from, String body);

com.twilio.rest.api.v2010.account.MessageCreator creator(com.twilio.type.PhoneNumber to, com.twilio.type.PhoneNumber from, java.util.List<java.net.URI> mediaUrl);

com.twilio.rest.api.v2010.account.MessageDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.MessageDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.MessageFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.MessageFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.MessageReader reader();

com.twilio.rest.api.v2010.account.MessageReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.MessageUpdater updater(String pathAccountSid, String pathSid, String body);

com.twilio.rest.api.v2010.account.MessageUpdater updater(String pathSid, String body);

The message API is defined in the syntax as follows:

twilio:message/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a MessageCreator to execute create

deleter

delete

Create a MessageDeleter to execute delete

fetcher

fetch

Create a MessageFetcher to execute fetch

reader

read

Create a MessageReader to execute read

updater

update

Create a MessageUpdater to execute update

The message API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

body

The text of the message you want to send. Can be up to 1,600 characters in length.

String

creator

from

The phone number that initiated the message

PhoneNumber

creator

mediaUrl

The URL of the media to send with the message

List

creator

messagingServiceSid

The SID of the Messaging Service you want to associate with the message

String

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

to

The destination phone number

PhoneNumber

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

body

The text of the message you want to send

String

updater

pathAccountSid

The SID of the Account that created the resources to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the message API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: message-feedback

Both producer and consumer are supported

The message-feedback API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.message.FeedbackCreator creator(String pathAccountSid, String pathMessageSid);

com.twilio.rest.api.v2010.account.message.FeedbackCreator creator(String pathMessageSid);

The message-feedback API is defined in the syntax as follows:

twilio:message-feedback/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a FeedbackCreator to execute create

The message-feedback API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

pathMessageSid

The SID of the Message resource for which the feedback was provided

String

In addition to the parameters above, the message-feedback API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: message-media

Both producer and consumer are supported

The message-media API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.message.MediaDeleter deleter(String pathAccountSid, String pathMessageSid, String pathSid);

com.twilio.rest.api.v2010.account.message.MediaDeleter deleter(String pathMessageSid, String pathSid);

com.twilio.rest.api.v2010.account.message.MediaFetcher fetcher(String pathAccountSid, String pathMessageSid, String pathSid);

com.twilio.rest.api.v2010.account.message.MediaFetcher fetcher(String pathMessageSid, String pathSid);

com.twilio.rest.api.v2010.account.message.MediaReader reader(String pathAccountSid, String pathMessageSid);

com.twilio.rest.api.v2010.account.message.MediaReader reader(String pathMessageSid);

The message-media API is defined in the syntax as follows:

twilio:message-media/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a MediaDeleter to execute delete

fetcher

fetch

Create a MediaFetcher to execute fetch

reader

read

Create a MediaReader to execute read

The message-media API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resource(s) to delete

String

deleter

pathMessageSid

The SID of the Message resource that this Media resource belongs to

String

deleter

pathSid

The unique string that identifies this resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource(s) to fetch

String

fetcher

pathMessageSid

The SID of the Message resource that this Media resource belongs to

String

fetcher

pathSid

The unique string that identifies this resource

String

reader

pathAccountSid

The SID of the Account that created the resource(s) to read

String

reader

pathMessageSid

The SID of the Message resource that this Media resource belongs to

String

In addition to the parameters above, the message-media API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: new-key

Both producer and consumer are supported

The new-key API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.NewKeyCreator creator();

com.twilio.rest.api.v2010.account.NewKeyCreator creator(String pathAccountSid);

The new-key API is defined in the syntax as follows:

twilio:new-key/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a NewKeyCreator to execute create

The new-key API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will be responsible for the new Key resource

String

In addition to the parameters above, the new-key API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: new-signing-key

Both producer and consumer are supported

The new-signing-key API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.NewSigningKeyCreator creator();

com.twilio.rest.api.v2010.account.NewSigningKeyCreator creator(String pathAccountSid);

The new-signing-key API is defined in the syntax as follows:

twilio:new-signing-key/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a NewSigningKeyCreator to execute create

The new-signing-key API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will be responsible for the new Key resource

String

In addition to the parameters above, the new-signing-key API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: notification

Both producer and consumer are supported

The notification API has 2 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.NotificationFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.NotificationFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.NotificationReader reader();

com.twilio.rest.api.v2010.account.NotificationReader reader(String pathAccountSid);

The notification API is defined in the syntax as follows:

twilio:notification/methodName?[parameters]

The 2 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

fetcher

fetch

Create a NotificationFetcher to execute fetch

reader

read

Create a NotificationReader to execute read

The notification API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the notification API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: outgoing-caller-id

Both producer and consumer are supported

The outgoing-caller-id API has 4 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.OutgoingCallerIdDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.OutgoingCallerIdDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.OutgoingCallerIdFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.OutgoingCallerIdFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.OutgoingCallerIdReader reader();

com.twilio.rest.api.v2010.account.OutgoingCallerIdReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.OutgoingCallerIdUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.OutgoingCallerIdUpdater updater(String pathSid);

The outgoing-caller-id API is defined in the syntax as follows:

twilio:outgoing-caller-id/methodName?[parameters]

The 4 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a OutgoingCallerIdDeleter to execute delete

fetcher

fetch

Create a OutgoingCallerIdFetcher to execute fetch

reader

read

Create a OutgoingCallerIdReader to execute read

updater

update

Create a OutgoingCallerIdUpdater to execute update

The outgoing-caller-id API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

pathAccountSid

The SID of the Account that created the resources to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the outgoing-caller-id API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: queue

Both producer and consumer are supported

The queue API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.QueueCreator creator(String friendlyName);

com.twilio.rest.api.v2010.account.QueueCreator creator(String pathAccountSid, String friendlyName);

com.twilio.rest.api.v2010.account.QueueDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.QueueDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.QueueFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.QueueFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.QueueReader reader();

com.twilio.rest.api.v2010.account.QueueReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.QueueUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.QueueUpdater updater(String pathSid);

The queue API is defined in the syntax as follows:

twilio:queue/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a QueueCreator to execute create

deleter

delete

Create a QueueDeleter to execute delete

fetcher

fetch

Create a QueueFetcher to execute fetch

reader

read

Create a QueueReader to execute read

updater

update

Create a QueueUpdater to execute update

The queue API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

friendlyName

A string to describe this resource

String

creator

pathAccountSid

The SID of the Account that will create the resource

String

deleter

pathAccountSid

The SID of the Account that created the resource(s) to delete

String

deleter

pathSid

The unique string that identifies this resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource(s) to fetch

String

fetcher

pathSid

The unique string that identifies this resource

String

reader

pathAccountSid

The SID of the Account that created the resource(s) to fetch

String

updater

pathAccountSid

The SID of the Account that created the resource(s) to update

String

updater

pathSid

The unique string that identifies this resource

String

In addition to the parameters above, the queue API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: queue-member

Both producer and consumer are supported

The queue-member API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.queue.MemberFetcher fetcher(String pathAccountSid, String pathQueueSid, String pathCallSid);

com.twilio.rest.api.v2010.account.queue.MemberFetcher fetcher(String pathQueueSid, String pathCallSid);

com.twilio.rest.api.v2010.account.queue.MemberReader reader(String pathAccountSid, String pathQueueSid);

com.twilio.rest.api.v2010.account.queue.MemberReader reader(String pathQueueSid);

com.twilio.rest.api.v2010.account.queue.MemberUpdater updater(String pathAccountSid, String pathQueueSid, String pathCallSid, java.net.URI url);

com.twilio.rest.api.v2010.account.queue.MemberUpdater updater(String pathQueueSid, String pathCallSid, java.net.URI url);

The queue-member API is defined in the syntax as follows:

twilio:queue-member/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

fetcher

fetch

Create a MemberFetcher to execute fetch

reader

read

Create a MemberReader to execute read

updater

update

Create a MemberUpdater to execute update

The queue-member API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

fetcher

pathAccountSid

The SID of the Account that created the resource(s) to fetch

String

fetcher

pathCallSid

The Call SID of the resource(s) to fetch

String

fetcher

pathQueueSid

The SID of the Queue in which to find the members

String

reader

pathAccountSid

The SID of the Account that created the resource(s) to read

String

reader

pathQueueSid

The SID of the Queue in which to find the members

String

updater

pathAccountSid

The SID of the Account that created the resource(s) to update

String

updater

pathCallSid

The Call SID of the resource(s) to update

String

updater

pathQueueSid

The SID of the Queue in which to find the members

String

updater

url

The absolute URL of the Queue resource

URI

In addition to the parameters above, the queue-member API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: recording

Both producer and consumer are supported

The recording API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.RecordingDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.RecordingDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.RecordingFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.RecordingFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.RecordingReader reader();

com.twilio.rest.api.v2010.account.RecordingReader reader(String pathAccountSid);

The recording API is defined in the syntax as follows:

twilio:recording/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a RecordingDeleter to execute delete

fetcher

fetch

Create a RecordingFetcher to execute fetch

reader

read

Create a RecordingReader to execute read

The recording API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the recording API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: recording-add-on-result

Both producer and consumer are supported

The recording-add-on-result API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.recording.AddOnResultDeleter deleter(String pathAccountSid, String pathReferenceSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.AddOnResultDeleter deleter(String pathReferenceSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.AddOnResultFetcher fetcher(String pathAccountSid, String pathReferenceSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.AddOnResultFetcher fetcher(String pathReferenceSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.AddOnResultReader reader(String pathAccountSid, String pathReferenceSid);

com.twilio.rest.api.v2010.account.recording.AddOnResultReader reader(String pathReferenceSid);

The recording-add-on-result API is defined in the syntax as follows:

twilio:recording-add-on-result/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a AddOnResultDeleter to execute delete

fetcher

fetch

Create a AddOnResultFetcher to execute fetch

reader

read

Create a AddOnResultReader to execute read

The recording-add-on-result API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathReferenceSid

The SID of the recording to which the result to delete belongs

String

deleter

pathSid

The unique string that identifies the resource to delete

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathReferenceSid

The SID of the recording to which the result to delete belongs

String

fetcher

pathSid

The unique string that identifies the resource to fetch

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

reader

pathReferenceSid

The SID of the recording to which the result to delete belongs

String

In addition to the parameters above, the recording-add-on-result API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: recording-add-on-result-payload

Both producer and consumer are supported

The recording-add-on-result-payload API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.recording.addonresult.PayloadDeleter deleter(String pathAccountSid, String pathReferenceSid, String pathAddOnResultSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.addonresult.PayloadDeleter deleter(String pathReferenceSid, String pathAddOnResultSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.addonresult.PayloadFetcher fetcher(String pathAccountSid, String pathReferenceSid, String pathAddOnResultSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.addonresult.PayloadFetcher fetcher(String pathReferenceSid, String pathAddOnResultSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.addonresult.PayloadReader reader(String pathAccountSid, String pathReferenceSid, String pathAddOnResultSid);

com.twilio.rest.api.v2010.account.recording.addonresult.PayloadReader reader(String pathReferenceSid, String pathAddOnResultSid);

The recording-add-on-result-payload API is defined in the syntax as follows:

twilio:recording-add-on-result-payload/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a PayloadDeleter to execute delete

fetcher

fetch

Create a PayloadFetcher to execute fetch

reader

read

Create a PayloadReader to execute read

The recording-add-on-result-payload API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathAddOnResultSid

The SID of the AddOnResult to which the payloads to delete belongs

String

deleter

pathReferenceSid

The SID of the recording to which the AddOnResult resource that contains the payloads to delete belongs

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathAddOnResultSid

The SID of the AddOnResult to which the payloads to delete belongs

String

fetcher

pathReferenceSid

The SID of the recording to which the AddOnResult resource that contains the payloads to delete belongs

String

fetcher

pathSid

The unique string that identifies the resource to fetch

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

reader

pathAddOnResultSid

The SID of the AddOnResult to which the payloads to delete belongs

String

reader

pathReferenceSid

The SID of the recording to which the AddOnResult resource that contains the payloads to delete belongs

String

In addition to the parameters above, the recording-add-on-result-payload API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: recording-transcription

Both producer and consumer are supported

The recording-transcription API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.recording.TranscriptionDeleter deleter(String pathAccountSid, String pathRecordingSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.TranscriptionDeleter deleter(String pathRecordingSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.TranscriptionFetcher fetcher(String pathAccountSid, String pathRecordingSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.TranscriptionFetcher fetcher(String pathRecordingSid, String pathSid);

com.twilio.rest.api.v2010.account.recording.TranscriptionReader reader(String pathAccountSid, String pathRecordingSid);

com.twilio.rest.api.v2010.account.recording.TranscriptionReader reader(String pathRecordingSid);

The recording-transcription API is defined in the syntax as follows:

twilio:recording-transcription/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a TranscriptionDeleter to execute delete

fetcher

fetch

Create a TranscriptionFetcher to execute fetch

reader

read

Create a TranscriptionReader to execute read

The recording-transcription API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathRecordingSid

The SID of the recording that created the transcription to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathRecordingSid

The SID of the recording that created the transcription to delete

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

reader

pathRecordingSid

The SID of the recording that created the transcription to delete

String

In addition to the parameters above, the recording-transcription API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: short-code

Both producer and consumer are supported

The short-code API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.ShortCodeFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ShortCodeFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.ShortCodeReader reader();

com.twilio.rest.api.v2010.account.ShortCodeReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.ShortCodeUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.ShortCodeUpdater updater(String pathSid);

The short-code API is defined in the syntax as follows:

twilio:short-code/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

fetcher

fetch

Create a ShortCodeFetcher to execute fetch

reader

read

Create a ShortCodeReader to execute read

updater

update

Create a ShortCodeUpdater to execute update

The short-code API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

fetcher

pathAccountSid

The SID of the Account that created the resource(s) to fetch

String

fetcher

pathSid

The unique string that identifies this resource

String

reader

pathAccountSid

The SID of the Account that created the resource(s) to read

String

updater

pathAccountSid

The SID of the Account that created the resource(s) to update

String

updater

pathSid

The unique string that identifies this resource

String

In addition to the parameters above, the short-code API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: signing-key

Both producer and consumer are supported

The signing-key API has 4 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.SigningKeyDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.SigningKeyDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.SigningKeyFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.SigningKeyFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.SigningKeyReader reader();

com.twilio.rest.api.v2010.account.SigningKeyReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.SigningKeyUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.SigningKeyUpdater updater(String pathSid);

The signing-key API is defined in the syntax as follows:

twilio:signing-key/methodName?[parameters]

The 4 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a SigningKeyDeleter to execute delete

fetcher

fetch

Create a SigningKeyFetcher to execute fetch

reader

read

Create a SigningKeyReader to execute read

updater

update

Create a SigningKeyUpdater to execute update

The signing-key API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The account_sid

String

deleter

pathSid

The sid

String

fetcher

pathAccountSid

The account_sid

String

fetcher

pathSid

The sid

String

reader

pathAccountSid

The account_sid

String

updater

pathAccountSid

The account_sid

String

updater

pathSid

The sid

String

In addition to the parameters above, the signing-key API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: sip-credential-list

Both producer and consumer are supported

The sip-credential-list API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.sip.CredentialListCreator creator(String friendlyName);

com.twilio.rest.api.v2010.account.sip.CredentialListCreator creator(String pathAccountSid, String friendlyName);

com.twilio.rest.api.v2010.account.sip.CredentialListDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.CredentialListDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.sip.CredentialListFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.CredentialListFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.sip.CredentialListReader reader();

com.twilio.rest.api.v2010.account.sip.CredentialListReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.sip.CredentialListUpdater updater(String pathAccountSid, String pathSid, String friendlyName);

com.twilio.rest.api.v2010.account.sip.CredentialListUpdater updater(String pathSid, String friendlyName);

The sip-credential-list API is defined in the syntax as follows:

twilio:sip-credential-list/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a CredentialListCreator to execute create

deleter

delete

Create a CredentialListDeleter to execute delete

fetcher

fetch

Create a CredentialListFetcher to execute fetch

reader

read

Create a CredentialListReader to execute read

updater

update

Create a CredentialListUpdater to execute update

The sip-credential-list API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

friendlyName

Human readable descriptive text

String

creator

pathAccountSid

The unique id of the Account that is responsible for this resource

String

deleter

pathAccountSid

The unique id of the Account that is responsible for this resource

String

deleter

pathSid

Delete by unique credential list Sid

String

fetcher

pathAccountSid

The unique id of the Account that is responsible for this resource

String

fetcher

pathSid

Fetch by unique credential list Sid

String

reader

pathAccountSid

The unique id of the Account that is responsible for this resource

String

updater

friendlyName

Human readable descriptive text

String

updater

pathAccountSid

The unique id of the Account that is responsible for this resource

String

updater

pathSid

Update by unique credential list Sid

String

In addition to the parameters above, the sip-credential-list API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: sip-credential-list-credential

Both producer and consumer are supported

The sip-credential-list-credential API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialCreator creator(String pathAccountSid, String pathCredentialListSid, String username, String password);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialCreator creator(String pathCredentialListSid, String username, String password);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialDeleter deleter(String pathAccountSid, String pathCredentialListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialDeleter deleter(String pathCredentialListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialFetcher fetcher(String pathAccountSid, String pathCredentialListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialFetcher fetcher(String pathCredentialListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialReader reader(String pathAccountSid, String pathCredentialListSid);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialReader reader(String pathCredentialListSid);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialUpdater updater(String pathAccountSid, String pathCredentialListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.credentiallist.CredentialUpdater updater(String pathCredentialListSid, String pathSid);

The sip-credential-list-credential API is defined in the syntax as follows:

twilio:sip-credential-list-credential/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a CredentialCreator to execute create

deleter

delete

Create a CredentialDeleter to execute delete

fetcher

fetch

Create a CredentialFetcher to execute fetch

reader

read

Create a CredentialReader to execute read

updater

update

Create a CredentialUpdater to execute update

The sip-credential-list-credential API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

password

The password will not be returned in the response

String

creator

pathAccountSid

The unique id of the Account that is responsible for this resource

String

creator

pathCredentialListSid

The unique id that identifies the credential list to include the created credential

String

creator

username

The username for this credential

String

deleter

pathAccountSid

The unique id of the Account that is responsible for this resource

String

deleter

pathCredentialListSid

The unique id that identifies the credential list to include the created credential

String

deleter

pathSid

The unique id that identifies the resource to delete

String

fetcher

pathAccountSid

The unique id of the Account that is responsible for this resource

String

fetcher

pathCredentialListSid

The unique id that identifies the credential list to include the created credential

String

fetcher

pathSid

The unique id that identifies the resource to fetch

String

reader

pathAccountSid

The unique id of the Account that is responsible for this resource

String

reader

pathCredentialListSid

The unique id that identifies the credential list to include the created credential

String

updater

pathAccountSid

The unique id of the Account that is responsible for this resource

String

updater

pathCredentialListSid

The unique id that identifies the credential list to include the created credential

String

updater

pathSid

The unique id that identifies the resource to update

String

In addition to the parameters above, the sip-credential-list-credential API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: sip-domain

Both producer and consumer are supported

The sip-domain API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.sip.DomainCreator creator(String domainName);

com.twilio.rest.api.v2010.account.sip.DomainCreator creator(String pathAccountSid, String domainName);

com.twilio.rest.api.v2010.account.sip.DomainDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.DomainDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.sip.DomainFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.DomainFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.sip.DomainReader reader();

com.twilio.rest.api.v2010.account.sip.DomainReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.sip.DomainUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.DomainUpdater updater(String pathSid);

The sip-domain API is defined in the syntax as follows:

twilio:sip-domain/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a DomainCreator to execute create

deleter

delete

Create a DomainDeleter to execute delete

fetcher

fetch

Create a DomainFetcher to execute fetch

reader

read

Create a DomainReader to execute read

updater

update

Create a DomainUpdater to execute update

The sip-domain API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

domainName

The unique address on Twilio to route SIP traffic

String

creator

pathAccountSid

The SID of the Account that will create the resource

String

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

pathAccountSid

The SID of the Account that created the resource to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the sip-domain API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: sip-domain-credential-list-mapping

Both producer and consumer are supported

The sip-domain-credential-list-mapping API has 4 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingCreator creator(String pathAccountSid, String pathDomainSid, String credentialListSid);

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingCreator creator(String pathDomainSid, String credentialListSid);

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingDeleter deleter(String pathAccountSid, String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingDeleter deleter(String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingFetcher fetcher(String pathAccountSid, String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingFetcher fetcher(String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingReader reader(String pathAccountSid, String pathDomainSid);

com.twilio.rest.api.v2010.account.sip.domain.CredentialListMappingReader reader(String pathDomainSid);

The sip-domain-credential-list-mapping API is defined in the syntax as follows:

twilio:sip-domain-credential-list-mapping/methodName?[parameters]

The 4 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a CredentialListMappingCreator to execute create

deleter

delete

Create a CredentialListMappingDeleter to execute delete

fetcher

fetch

Create a CredentialListMappingFetcher to execute fetch

reader

read

Create a CredentialListMappingReader to execute read

The sip-domain-credential-list-mapping API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

credentialListSid

A string that identifies the CredentialList resource to map to the SIP domain

String

creator

pathAccountSid

The unique sid that identifies this account

String

creator

pathDomainSid

A string that identifies the SIP Domain for which the CredentialList resource will be mapped

String

deleter

pathAccountSid

The unique sid that identifies this account

String

deleter

pathDomainSid

A string that identifies the SIP Domain for which the CredentialList resource will be mapped

String

deleter

pathSid

A string that identifies the resource to delete

String

fetcher

pathAccountSid

The unique sid that identifies this account

String

fetcher

pathDomainSid

A string that identifies the SIP Domain for which the CredentialList resource will be mapped

String

fetcher

pathSid

A string that identifies the resource to fetch

String

reader

pathAccountSid

The unique sid that identifies this account

String

reader

pathDomainSid

A string that identifies the SIP Domain for which the CredentialList resource will be mapped

String

In addition to the parameters above, the sip-domain-credential-list-mapping API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: sip-domain-ip-access-control-list-mapping

Both producer and consumer are supported

The sip-domain-ip-access-control-list-mapping API has 4 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingCreator creator(String pathAccountSid, String pathDomainSid, String ipAccessControlListSid);

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingCreator creator(String pathDomainSid, String ipAccessControlListSid);

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingDeleter deleter(String pathAccountSid, String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingDeleter deleter(String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingFetcher fetcher(String pathAccountSid, String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingFetcher fetcher(String pathDomainSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingReader reader(String pathAccountSid, String pathDomainSid);

com.twilio.rest.api.v2010.account.sip.domain.IpAccessControlListMappingReader reader(String pathDomainSid);

The sip-domain-ip-access-control-list-mapping API is defined in the syntax as follows:

twilio:sip-domain-ip-access-control-list-mapping/methodName?[parameters]

The 4 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a IpAccessControlListMappingCreator to execute create

deleter

delete

Create a IpAccessControlListMappingDeleter to execute delete

fetcher

fetch

Create a IpAccessControlListMappingFetcher to execute fetch

reader

read

Create a IpAccessControlListMappingReader to execute read

The sip-domain-ip-access-control-list-mapping API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

ipAccessControlListSid

The unique id of the IP access control list to map to the SIP domain

String

creator

pathAccountSid

The unique id of the Account that is responsible for this resource

String

creator

pathDomainSid

A string that uniquely identifies the SIP Domain

String

deleter

pathAccountSid

The unique id of the Account that is responsible for this resource

String

deleter

pathDomainSid

A string that uniquely identifies the SIP Domain

String

deleter

pathSid

A 34 character string that uniquely identifies the resource to delete.

String

fetcher

pathAccountSid

The unique id of the Account that is responsible for this resource

String

fetcher

pathDomainSid

A string that uniquely identifies the SIP Domain

String

fetcher

pathSid

A 34 character string that uniquely identifies the resource to fetch.

String

reader

pathAccountSid

The unique id of the Account that is responsible for this resource

String

reader

pathDomainSid

A string that uniquely identifies the SIP Domain

String

In addition to the parameters above, the sip-domain-ip-access-control-list-mapping API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: sip-ip-access-control-list

Both producer and consumer are supported

The sip-ip-access-control-list API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.sip.IpAccessControlListCreator creator(String friendlyName);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListCreator creator(String pathAccountSid, String friendlyName);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListReader reader();

com.twilio.rest.api.v2010.account.sip.IpAccessControlListReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListUpdater updater(String pathAccountSid, String pathSid, String friendlyName);

com.twilio.rest.api.v2010.account.sip.IpAccessControlListUpdater updater(String pathSid, String friendlyName);

The sip-ip-access-control-list API is defined in the syntax as follows:

twilio:sip-ip-access-control-list/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a IpAccessControlListCreator to execute create

deleter

delete

Create a IpAccessControlListDeleter to execute delete

fetcher

fetch

Create a IpAccessControlListFetcher to execute fetch

reader

read

Create a IpAccessControlListReader to execute read

updater

update

Create a IpAccessControlListUpdater to execute update

The sip-ip-access-control-list API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

friendlyName

A human readable description of this resource

String

creator

pathAccountSid

The unique sid that identifies this account

String

deleter

pathAccountSid

The unique sid that identifies this account

String

deleter

pathSid

A string that identifies the resource to delete

String

fetcher

pathAccountSid

The unique sid that identifies this account

String

fetcher

pathSid

A string that identifies the resource to fetch

String

reader

pathAccountSid

The unique sid that identifies this account

String

updater

friendlyName

A human readable description of this resource

String

updater

pathAccountSid

The unique sid that identifies this account

String

updater

pathSid

A string that identifies the resource to update

String

In addition to the parameters above, the sip-ip-access-control-list API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: sip-ip-access-control-list-ip-address

Both producer and consumer are supported

The sip-ip-access-control-list-ip-address API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressCreator creator(String pathAccountSid, String pathIpAccessControlListSid, String friendlyName, String ipAddress);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressCreator creator(String pathIpAccessControlListSid, String friendlyName, String ipAddress);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressDeleter deleter(String pathAccountSid, String pathIpAccessControlListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressDeleter deleter(String pathIpAccessControlListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressFetcher fetcher(String pathAccountSid, String pathIpAccessControlListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressFetcher fetcher(String pathIpAccessControlListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressReader reader(String pathAccountSid, String pathIpAccessControlListSid);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressReader reader(String pathIpAccessControlListSid);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressUpdater updater(String pathAccountSid, String pathIpAccessControlListSid, String pathSid);

com.twilio.rest.api.v2010.account.sip.ipaccesscontrollist.IpAddressUpdater updater(String pathIpAccessControlListSid, String pathSid);

The sip-ip-access-control-list-ip-address API is defined in the syntax as follows:

twilio:sip-ip-access-control-list-ip-address/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a IpAddressCreator to execute create

deleter

delete

Create a IpAddressDeleter to execute delete

fetcher

fetch

Create a IpAddressFetcher to execute fetch

reader

read

Create a IpAddressReader to execute read

updater

update

Create a IpAddressUpdater to execute update

The sip-ip-access-control-list-ip-address API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

friendlyName

A human readable descriptive text for this resource, up to 64 characters long.

String

creator

ipAddress

An IP address in dotted decimal notation from which you want to accept traffic. Any SIP requests from this IP address will be allowed by Twilio. IPv4 only supported today.

String

creator

pathAccountSid

The unique sid that identifies this account

String

creator

pathIpAccessControlListSid

The IpAccessControlList Sid with which to associate the created IpAddress resource

String

deleter

pathAccountSid

The unique sid that identifies this account

String

deleter

pathIpAccessControlListSid

The IpAccessControlList Sid with which to associate the created IpAddress resource

String

deleter

pathSid

A string that identifies the resource to delete

String

fetcher

pathAccountSid

The unique sid that identifies this account

String

fetcher

pathIpAccessControlListSid

The IpAccessControlList Sid with which to associate the created IpAddress resource

String

fetcher

pathSid

A string that identifies the IpAddress resource to fetch

String

reader

pathAccountSid

The unique sid that identifies this account

String

reader

pathIpAccessControlListSid

The IpAccessControlList Sid with which to associate the created IpAddress resource

String

updater

pathAccountSid

The unique sid that identifies this account

String

updater

pathIpAccessControlListSid

The IpAccessControlList Sid with which to associate the created IpAddress resource

String

updater

pathSid

A string that identifies the IpAddress resource to update

String

In addition to the parameters above, the sip-ip-access-control-list-ip-address API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: token

Both producer and consumer are supported

The token API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.TokenCreator creator();

com.twilio.rest.api.v2010.account.TokenCreator creator(String pathAccountSid);

The token API is defined in the syntax as follows:

twilio:token/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a TokenCreator to execute create

The token API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account that will create the resource

String

In addition to the parameters above, the token API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: transcription

Both producer and consumer are supported

The transcription API has 3 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.TranscriptionDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.TranscriptionDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.TranscriptionFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.TranscriptionFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.TranscriptionReader reader();

com.twilio.rest.api.v2010.account.TranscriptionReader reader(String pathAccountSid);

The transcription API is defined in the syntax as follows:

twilio:transcription/methodName?[parameters]

The 3 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

deleter

delete

Create a TranscriptionDeleter to execute delete

fetcher

fetch

Create a TranscriptionFetcher to execute fetch

reader

read

Create a TranscriptionReader to execute read

The transcription API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the transcription API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record

Both producer and consumer are supported

The usage-record API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.RecordReader reader();

com.twilio.rest.api.v2010.account.usage.RecordReader reader(String pathAccountSid);

The usage-record API is defined in the syntax as follows:

twilio:usage-record/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a RecordReader to execute read

The usage-record API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-all-time

Both producer and consumer are supported

The usage-record-all-time API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.AllTimeReader reader();

com.twilio.rest.api.v2010.account.usage.record.AllTimeReader reader(String pathAccountSid);

The usage-record-all-time API is defined in the syntax as follows:

twilio:usage-record-all-time/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a AllTimeReader to execute read

The usage-record-all-time API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-all-time API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-daily

Both producer and consumer are supported

The usage-record-daily API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.DailyReader reader();

com.twilio.rest.api.v2010.account.usage.record.DailyReader reader(String pathAccountSid);

The usage-record-daily API is defined in the syntax as follows:

twilio:usage-record-daily/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a DailyReader to execute read

The usage-record-daily API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-daily API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-last-month

Both producer and consumer are supported

The usage-record-last-month API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.LastMonthReader reader();

com.twilio.rest.api.v2010.account.usage.record.LastMonthReader reader(String pathAccountSid);

The usage-record-last-month API is defined in the syntax as follows:

twilio:usage-record-last-month/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a LastMonthReader to execute read

The usage-record-last-month API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-last-month API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-monthly

Both producer and consumer are supported

The usage-record-monthly API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.MonthlyReader reader();

com.twilio.rest.api.v2010.account.usage.record.MonthlyReader reader(String pathAccountSid);

The usage-record-monthly API is defined in the syntax as follows:

twilio:usage-record-monthly/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a MonthlyReader to execute read

The usage-record-monthly API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-monthly API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-this-month

Both producer and consumer are supported

The usage-record-this-month API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.ThisMonthReader reader();

com.twilio.rest.api.v2010.account.usage.record.ThisMonthReader reader(String pathAccountSid);

The usage-record-this-month API is defined in the syntax as follows:

twilio:usage-record-this-month/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a ThisMonthReader to execute read

The usage-record-this-month API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-this-month API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-today

Both producer and consumer are supported

The usage-record-today API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.TodayReader reader();

com.twilio.rest.api.v2010.account.usage.record.TodayReader reader(String pathAccountSid);

The usage-record-today API is defined in the syntax as follows:

twilio:usage-record-today/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a TodayReader to execute read

The usage-record-today API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-today API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-yearly

Both producer and consumer are supported

The usage-record-yearly API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.YearlyReader reader();

com.twilio.rest.api.v2010.account.usage.record.YearlyReader reader(String pathAccountSid);

The usage-record-yearly API is defined in the syntax as follows:

twilio:usage-record-yearly/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a YearlyReader to execute read

The usage-record-yearly API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-yearly API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-record-yesterday

Both producer and consumer are supported

The usage-record-yesterday API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.record.YesterdayReader reader();

com.twilio.rest.api.v2010.account.usage.record.YesterdayReader reader(String pathAccountSid);

The usage-record-yesterday API is defined in the syntax as follows:

twilio:usage-record-yesterday/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

reader

read

Create a YesterdayReader to execute read

The usage-record-yesterday API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

reader

pathAccountSid

The SID of the Account that created the resources to read

String

In addition to the parameters above, the usage-record-yesterday API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: usage-trigger

Both producer and consumer are supported

The usage-trigger API has 5 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.usage.TriggerCreator creator(String pathAccountSid, java.net.URI callbackUrl, String triggerValue, com.twilio.rest.api.v2010.account.usage.Trigger.UsageCategory usageCategory);

com.twilio.rest.api.v2010.account.usage.TriggerCreator creator(java.net.URI callbackUrl, String triggerValue, com.twilio.rest.api.v2010.account.usage.Trigger.UsageCategory usageCategory);

com.twilio.rest.api.v2010.account.usage.TriggerDeleter deleter(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.usage.TriggerDeleter deleter(String pathSid);

com.twilio.rest.api.v2010.account.usage.TriggerFetcher fetcher(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.usage.TriggerFetcher fetcher(String pathSid);

com.twilio.rest.api.v2010.account.usage.TriggerReader reader();

com.twilio.rest.api.v2010.account.usage.TriggerReader reader(String pathAccountSid);

com.twilio.rest.api.v2010.account.usage.TriggerUpdater updater(String pathAccountSid, String pathSid);

com.twilio.rest.api.v2010.account.usage.TriggerUpdater updater(String pathSid);

The usage-trigger API is defined in the syntax as follows:

twilio:usage-trigger/methodName?[parameters]

The 5 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a TriggerCreator to execute create

deleter

delete

Create a TriggerDeleter to execute delete

fetcher

fetch

Create a TriggerFetcher to execute fetch

reader

read

Create a TriggerReader to execute read

updater

update

Create a TriggerUpdater to execute update

The usage-trigger API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

callbackUrl

The URL we call when the trigger fires

URI

creator

pathAccountSid

The SID of the Account that will create the resource

String

creator

triggerValue

The usage value at which the trigger should fire

String

creator

usageCategory

The usage category the trigger watches

UsageCategory

deleter

pathAccountSid

The SID of the Account that created the resources to delete

String

deleter

pathSid

The unique string that identifies the resource

String

fetcher

pathAccountSid

The SID of the Account that created the resource to fetch

String

fetcher

pathSid

The unique string that identifies the resource

String

reader

pathAccountSid

The SID of the Account that created the resources to read

String

updater

pathAccountSid

The SID of the Account that created the resources to update

String

updater

pathSid

The unique string that identifies the resource

String

In addition to the parameters above, the usage-trigger API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

API: validation-request

Both producer and consumer are supported

The validation-request API has 1 method(s) which is represented by the following method signatures (an API method may have multiple signatures due to overloading):

com.twilio.rest.api.v2010.account.ValidationRequestCreator creator(String pathAccountSid, com.twilio.type.PhoneNumber phoneNumber);

com.twilio.rest.api.v2010.account.ValidationRequestCreator creator(com.twilio.type.PhoneNumber phoneNumber);

The validation-request API is defined in the syntax as follows:

twilio:validation-request/methodName?[parameters]

The 1 method(s) is listed in the table below. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method Alias Description

creator

create

Create a ValidationRequestCreator to execute create

The validation-request API method(s) has the following set of parameters listed in the table below:

Method Parameter Description Type

creator

pathAccountSid

The SID of the Account responsible for the new Caller ID

String

creator

phoneNumber

The phone number to verify in E.164 format

PhoneNumber

In addition to the parameters above, the validation-request API can also use from the 23 endpoint query option which is listed in the Query Parameters section.

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.parameter. The inBody parameter overrides message header, i.e. the endpoint parameter inBody=myParameterNameHere would override a CamelTwilio.myParameterNameHere header.

Producer Endpoints:

Producer endpoints can use endpoint prefixes followed by endpoint names and associated options described next. A shorthand alias can be used for all of the endpoints. The endpoint URI MUST contain a prefix.

Any of the endpoint options can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelTwilio.<option>. Note that the inBody option overrides message header, i.e. the endpoint option inBody=option would override a CamelTwilio.option header.

Endpoint can be one of:

Endpoint Shorthand Alias Description

creator

create

Make the request to the Twilio API to perform the create

deleter

delete

Make the request to the Twilio API to perform the delete

fetcher

fetch

Make the request to the Twilio API to perform the fetch

reader

read

Make the request to the Twilio API to perform the read

updater

update

Make the request to the Twilio API to perform the update

Available endpoints differ depending on the endpoint prefixes.

For more information on the endpoints and options see API documentation at: https://www.twilio.com/docs/libraries/reference/twilio-java/index.html

Spring Boot Auto-Configuration

When using twilio with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-twilio-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 9 options, which are listed below.

Name Description Default Type

camel.component.twilio.account-sid

The account SID to use.

String

camel.component.twilio.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.twilio.configuration

To use the shared configuration. The option is a org.apache.camel.component.twilio.TwilioConfiguration type.

String

camel.component.twilio.enabled

Whether to enable auto configuration of the twilio component. This is enabled by default.

Boolean

camel.component.twilio.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.twilio.password

Auth token for the account.

String

camel.component.twilio.rest-client

To use the shared REST client. The option is a com.twilio.http.TwilioRestClient type.

String

camel.component.twilio.username

The account to use.

String

camel.component.twilio.basic-property-binding

Deprecated Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean