Paho

Since Camel 2.16

Both producer and consumer are supported

Paho component provides connector for the MQTT messaging protocol using the Eclipse Paho library. Paho is one of the most popular MQTT libraries, so if you would like to integrate it with your Java project - Camel Paho connector is a way to go.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-paho</artifactId>
    <version>x.y.z</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

paho:topic[?options]

Where topic is the name of the topic.

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Paho component supports 31 options, which are listed below.

Name Description Default Type

automaticReconnect (common)

Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.

boolean

brokerUrl (common)

The URL of the MQTT broker.

String

cleanSession (common)

Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.

boolean

clientId (common)

MQTT client identifier. The identifier must be unique.

String

configuration (common)

To use the shared Paho configuration.

PahoConfiguration

connectionTimeout (common)

Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.

int

filePersistenceDirectory (common)

Base directory used by file persistence. Will by default use user directory.

String

keepAliveInterval (common)

Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.

int

maxInflight (common)

Sets the max inflight. please increase this value in a high traffic environment. The default value is 10.

int

maxReconnectDelay (common)

Get the maximum time (in millis) to wait between reconnects.

int

mqttVersion (common)

Sets the MQTT version. The default action is to connect with version 3.1.1, and to fall back to 3.1 if that fails. Version 3.1.1 or 3.1 can be selected specifically, with no fall back, by using the MQTT_VERSION_3_1_1 or MQTT_VERSION_3_1 options respectively.

int

persistence (common)

Client persistence to be used - memory or file.

Enum values:

  • FILE

  • MEMORY

PahoPersistence

qos (common)

Client quality of service level (0-2).

int

retained (common)

Retain option.

boolean

serverURIs (common)

Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.

String

willPayload (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

String

willQos (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

int

willRetained (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

boolean

willTopic (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

boolean

client (advanced)

To use a shared Paho client.

MqttClient

customWebSocketHeaders (advanced)

Sets the Custom WebSocket Headers for the WebSocket Connection.

Properties

executorServiceTimeout (advanced)

Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.

int

httpsHostnameVerificationEnabled (security)

Whether SSL HostnameVerifier is enabled or not. The default value is true.

boolean

password (security)

Password to be used for authentication against the MQTT broker.

String

socketFactory (security)

Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings.

SocketFactory

sslClientProps (security)

Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509.

Properties

sslHostnameVerifier (security)

Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier.

HostnameVerifier

userName (security)

Username to be used for authentication against the MQTT broker.

String

Endpoint Options

The Paho endpoint is configured using URI syntax:

paho:topic

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

topic (common)

Required Name of the topic.

String

Query Parameters (31 parameters)

Name Description Default Type

automaticReconnect (common)

Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.

boolean

brokerUrl (common)

The URL of the MQTT broker.

String

cleanSession (common)

Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.

boolean

clientId (common)

MQTT client identifier. The identifier must be unique.

String

connectionTimeout (common)

Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.

int

filePersistenceDirectory (common)

Base directory used by file persistence. Will by default use user directory.

String

keepAliveInterval (common)

Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.

int

maxInflight (common)

Sets the max inflight. please increase this value in a high traffic environment. The default value is 10.

int

maxReconnectDelay (common)

Get the maximum time (in millis) to wait between reconnects.

int

mqttVersion (common)

Sets the MQTT version. The default action is to connect with version 3.1.1, and to fall back to 3.1 if that fails. Version 3.1.1 or 3.1 can be selected specifically, with no fall back, by using the MQTT_VERSION_3_1_1 or MQTT_VERSION_3_1 options respectively.

int

persistence (common)

Client persistence to be used - memory or file.

Enum values:

  • FILE

  • MEMORY

PahoPersistence

qos (common)

Client quality of service level (0-2).

int

retained (common)

Retain option.

boolean

serverURIs (common)

Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.

String

willPayload (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

String

willQos (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

int

willRetained (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

boolean

willTopic (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

  • InOptionalOut

ExchangePattern

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

client (advanced)

To use an existing mqtt client.

MqttClient

customWebSocketHeaders (advanced)

Sets the Custom WebSocket Headers for the WebSocket Connection.

Properties

executorServiceTimeout (advanced)

Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.

int

httpsHostnameVerificationEnabled (security)

Whether SSL HostnameVerifier is enabled or not. The default value is true.

boolean

password (security)

Password to be used for authentication against the MQTT broker.

String

socketFactory (security)

Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings.

SocketFactory

sslClientProps (security)

Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509.

Properties

sslHostnameVerifier (security)

Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier.

HostnameVerifier

userName (security)

Username to be used for authentication against the MQTT broker.

String

Headers

The following headers are recognized by the Paho component:

Header Java constant Endpoint type Value type Description

CamelMqttTopic

PahoConstants.MQTT_TOPIC

Consumer

String

The name of the topic

CamelMqttQoS

PahoConstants.MQTT_QOS

Consumer

Integer

QualityOfService of the incoming message

CamelPahoOverrideTopic

PahoConstants.CAMEL_PAHO_OVERRIDE_TOPIC

Producer

String

Name of topic to override and send to instead of topic specified on endpoint

Default payload type

By default Camel Paho component operates on the binary payloads extracted out of (or put into) the MQTT message:

// Receive payload
byte[] payload = (byte[]) consumerTemplate.receiveBody("paho:topic");

// Send payload
byte[] payload = "message".getBytes();
producerTemplate.sendBody("paho:topic", payload);

But of course Camel build-in type conversion API can perform the automatic data type transformations for you. In the example below Camel automatically converts binary payload into String (and conversely):

// Receive payload
String payload = consumerTemplate.receiveBody("paho:topic", String.class);

// Send payload
String payload = "message";
producerTemplate.sendBody("paho:topic", payload);

Samples

For example the following snippet reads messages from the MQTT broker installed on the same host as the Camel router:

from("paho:some/queue")
    .to("mock:test");

While the snippet below sends message to the MQTT broker:

from("direct:test")
    .to("paho:some/target/queue");

For example this is how to read messages from the remote MQTT broker:

from("paho:some/queue?brokerUrl=tcp://iot.eclipse.org:1883")
    .to("mock:test");

And here we override the default topic and set to a dynamic topic

from("direct:test")
    .setHeader(PahoConstants.CAMEL_PAHO_OVERRIDE_TOPIC, simple("${header.customerId}"))
    .to("paho:some/target/queue");

Spring Boot Auto-Configuration

When using paho with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-paho-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 32 options, which are listed below.

Name Description Default Type

camel.component.paho.automatic-reconnect

Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.

true

Boolean

camel.component.paho.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.paho.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.paho.broker-url

The URL of the MQTT broker.

tcp://localhost:1883

String

camel.component.paho.clean-session

Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.

true

Boolean

camel.component.paho.client

To use a shared Paho client. The option is a org.eclipse.paho.client.mqttv3.MqttClient type.

MqttClient

camel.component.paho.client-id

MQTT client identifier. The identifier must be unique.

String

camel.component.paho.configuration

To use the shared Paho configuration. The option is a org.apache.camel.component.paho.PahoConfiguration type.

PahoConfiguration

camel.component.paho.connection-timeout

Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.

30

Integer

camel.component.paho.custom-web-socket-headers

Sets the Custom WebSocket Headers for the WebSocket Connection. The option is a java.util.Properties type.

Properties

camel.component.paho.enabled

Whether to enable auto configuration of the paho component. This is enabled by default.

Boolean

camel.component.paho.executor-service-timeout

Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.

1

Integer

camel.component.paho.file-persistence-directory

Base directory used by file persistence. Will by default use user directory.

String

camel.component.paho.https-hostname-verification-enabled

Whether SSL HostnameVerifier is enabled or not. The default value is true.

true

Boolean

camel.component.paho.keep-alive-interval

Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.

60

Integer

camel.component.paho.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.paho.max-inflight

Sets the max inflight. please increase this value in a high traffic environment. The default value is 10.

10

Integer

camel.component.paho.max-reconnect-delay

Get the maximum time (in millis) to wait between reconnects.

128000

Integer

camel.component.paho.mqtt-version

Sets the MQTT version. The default action is to connect with version 3.1.1, and to fall back to 3.1 if that fails. Version 3.1.1 or 3.1 can be selected specifically, with no fall back, by using the MQTT_VERSION_3_1_1 or MQTT_VERSION_3_1 options respectively.

Integer

camel.component.paho.password

Password to be used for authentication against the MQTT broker.

String

camel.component.paho.persistence

Client persistence to be used - memory or file.

PahoPersistence

camel.component.paho.qos

Client quality of service level (0-2).

2

Integer

camel.component.paho.retained

Retain option.

false

Boolean

camel.component.paho.server-u-r-is

Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.

String

camel.component.paho.socket-factory

Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings. The option is a javax.net.SocketFactory type.

SocketFactory

camel.component.paho.ssl-client-props

Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509. The option is a java.util.Properties type.

Properties

camel.component.paho.ssl-hostname-verifier

Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier. The option is a javax.net.ssl.HostnameVerifier type.

HostnameVerifier

camel.component.paho.user-name

Username to be used for authentication against the MQTT broker.

String

camel.component.paho.will-payload

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

String

camel.component.paho.will-qos

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

Integer

camel.component.paho.will-retained

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

false

Boolean

camel.component.paho.will-topic

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to The byte payload for the message. The quality of service to publish the message at (0, 1 or 2). Whether or not the message should be retained.

String