Azure ServiceBus

Since Camel 3.12

Both producer and consumer are supported

The azure-servicebus component that integrates Azure ServiceBus. Azure ServiceBus is a fully managed enterprise integration message broker. Service Bus can decouple applications and services. Service Bus offers a reliable and secure platform for asynchronous transfer of data and state. Data is transferred between different applications and services using messages.

Prerequisites

You must have a valid Windows Azure Storage account. More information is available at Azure Documentation Portal.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-azure-servicebus</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Azure ServiceBus component supports 29 options, which are listed below.

Name Description Default Type

amqpRetryOptions (common)

Sets the retry options for Service Bus clients. If not specified, the default retry options are used.

AmqpRetryOptions

amqpTransportType (common)

Sets the transport type by which all the communication with Azure Service Bus occurs. Default value is AMQP.

Enum values:

  • Amqp

  • AmqpWebSockets

AMQP

AmqpTransportType

clientOptions (common)

Sets the ClientOptions to be sent from the client built from this builder, enabling customization of certain properties, as well as support the addition of custom header information.

ClientOptions

configuration (common)

The component configurations.

ServiceBusConfiguration

headerFilterStrategy (common)

To use a custom HeaderFilterStrategy to filter Service Bus application properties to and from Camel message headers.

HeaderFilterStrategy

proxyOptions (common)

Sets the proxy configuration to use for ServiceBusSenderAsyncClient. When a proxy is configured, AMQP_WEB_SOCKETS must be used for the transport type.

ProxyOptions

serviceBusType (common)

Required The service bus type of connection to execute. Queue is for typical queue option and topic for subscription based model.

Enum values:

  • queue

  • topic

queue

ServiceBusType

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

consumerOperation (consumer)

Sets the desired operation to be used in the consumer.

Enum values:

  • receiveMessages

  • peekMessages

receiveMessages

ServiceBusConsumerOperationDefinition

disableAutoComplete (consumer)

Disables auto-complete and auto-abandon of received messages. By default, a successfully processed message is completed. If an error happens when the message is abandoned.

false

boolean

maxAutoLockRenewDuration (consumer)

Sets the amount of time to continue auto-renewing the lock. Setting ZERO disables auto-renewal. For ServiceBus receive mode (RECEIVE_AND_DELETE RECEIVE_AND_DELETE), auto-renewal is disabled.

5m

Duration

peekNumMaxMessages (consumer)

Set the max number of messages to be peeked during the peek operation.

Integer

prefetchCount (consumer)

Sets the prefetch count of the receiver. For both PEEK_LOCK PEEK_LOCK and RECEIVE_AND_DELETE RECEIVE_AND_DELETE receive modes the default value is 1. Prefetch speeds up the message flow by aiming to have a message readily available for local retrieval when and before the application asks for one using receive message. Setting a non-zero value will prefetch that number of messages. Setting the value to zero turns prefetch off.

int

receiverAsyncClient (consumer)

Autowired Sets the receiverAsyncClient in order to consume messages by the consumer.

ServiceBusReceiverAsyncClient

serviceBusReceiveMode (consumer)

Sets the receive mode for the receiver.

Enum values:

  • PEEK_LOCK

  • RECEIVE_AND_DELETE

PEEK_LOCK

ServiceBusReceiveMode

subQueue (consumer)

Sets the type of the SubQueue to connect to.

Enum values:

  • NONE

  • DEAD_LETTER_QUEUE

  • TRANSFER_DEAD_LETTER_QUEUE

SubQueue

subscriptionName (consumer)

Sets the name of the subscription in the topic to listen to. topicOrQueueName and serviceBusType=topic must also be set. This property is required if serviceBusType=topic and the consumer is in use.

String

reconnectDelay (consumer (advanced))

If the consumer has connection failure to Azure ServiceBus, then delay (millis) some time before re-connecting.

5000

int

binary (producer)

Set binary mode. If true, message body will be sent as byte. By default, it is false.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

producerOperation (producer)

Sets the desired operation to be used in the producer.

Enum values:

  • sendMessages

  • scheduleMessages

sendMessages

ServiceBusProducerOperationDefinition

scheduledEnqueueTime (producer)

Sets OffsetDateTime at which the message should appear in the Service Bus queue or topic.

OffsetDateTime

senderAsyncClient (producer)

Autowired Sets SenderAsyncClient to be used in the producer.

ServiceBusSenderAsyncClient

serviceBusTransactionContext (producer)

Represents transaction in service. This object just contains transaction id.

ServiceBusTransactionContext

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

connectionString (security)

Sets the connection string for a Service Bus namespace or a specific Service Bus resource.

String

credentialType (security)

Determines the credential strategy to adopt.

Enum values:

  • AZURE_IDENTITY

  • CONNECTION_STRING

  • TOKEN_CREDENTIAL

CONNECTION_STRING

CredentialType

fullyQualifiedNamespace (security)

Fully Qualified Namespace of the service bus.

String

tokenCredential (security)

A TokenCredential for Azure AD authentication.

TokenCredential

Endpoint Options

The Azure ServiceBus endpoint is configured using URI syntax:

azure-servicebus:topicOrQueueName

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

topicOrQueueName (common)

Selected topic name or the queue name, that is depending on serviceBusType config. For example if serviceBusType=queue, then this will be the queue name and if serviceBusType=topic, this will be the topic name.

String

Query Parameters (29 parameters)

Name Description Default Type

amqpRetryOptions (common)

Sets the retry options for Service Bus clients. If not specified, the default retry options are used.

AmqpRetryOptions

amqpTransportType (common)

Sets the transport type by which all the communication with Azure Service Bus occurs. Default value is AMQP.

Enum values:

  • Amqp

  • AmqpWebSockets

AMQP

AmqpTransportType

clientOptions (common)

Sets the ClientOptions to be sent from the client built from this builder, enabling customization of certain properties, as well as support the addition of custom header information.

ClientOptions

headerFilterStrategy (common)

To use a custom HeaderFilterStrategy to filter Service Bus application properties to and from Camel message headers.

HeaderFilterStrategy

proxyOptions (common)

Sets the proxy configuration to use for ServiceBusSenderAsyncClient. When a proxy is configured, AMQP_WEB_SOCKETS must be used for the transport type.

ProxyOptions

serviceBusType (common)

Required The service bus type of connection to execute. Queue is for typical queue option and topic for subscription based model.

Enum values:

  • queue

  • topic

queue

ServiceBusType

consumerOperation (consumer)

Sets the desired operation to be used in the consumer.

Enum values:

  • receiveMessages

  • peekMessages

receiveMessages

ServiceBusConsumerOperationDefinition

disableAutoComplete (consumer)

Disables auto-complete and auto-abandon of received messages. By default, a successfully processed message is completed. If an error happens when the message is abandoned.

false

boolean

maxAutoLockRenewDuration (consumer)

Sets the amount of time to continue auto-renewing the lock. Setting ZERO disables auto-renewal. For ServiceBus receive mode (RECEIVE_AND_DELETE RECEIVE_AND_DELETE), auto-renewal is disabled.

5m

Duration

peekNumMaxMessages (consumer)

Set the max number of messages to be peeked during the peek operation.

Integer

prefetchCount (consumer)

Sets the prefetch count of the receiver. For both PEEK_LOCK PEEK_LOCK and RECEIVE_AND_DELETE RECEIVE_AND_DELETE receive modes the default value is 1. Prefetch speeds up the message flow by aiming to have a message readily available for local retrieval when and before the application asks for one using receive message. Setting a non-zero value will prefetch that number of messages. Setting the value to zero turns prefetch off.

int

receiverAsyncClient (consumer)

Autowired Sets the receiverAsyncClient in order to consume messages by the consumer.

ServiceBusReceiverAsyncClient

serviceBusReceiveMode (consumer)

Sets the receive mode for the receiver.

Enum values:

  • PEEK_LOCK

  • RECEIVE_AND_DELETE

PEEK_LOCK

ServiceBusReceiveMode

subQueue (consumer)

Sets the type of the SubQueue to connect to.

Enum values:

  • NONE

  • DEAD_LETTER_QUEUE

  • TRANSFER_DEAD_LETTER_QUEUE

SubQueue

subscriptionName (consumer)

Sets the name of the subscription in the topic to listen to. topicOrQueueName and serviceBusType=topic must also be set. This property is required if serviceBusType=topic and the consumer is in use.

String

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

reconnectDelay (consumer (advanced))

If the consumer has connection failure to Azure ServiceBus, then delay (millis) some time before re-connecting.

5000

int

binary (producer)

Set binary mode. If true, message body will be sent as byte. By default, it is false.

false

boolean

producerOperation (producer)

Sets the desired operation to be used in the producer.

Enum values:

  • sendMessages

  • scheduleMessages

sendMessages

ServiceBusProducerOperationDefinition

scheduledEnqueueTime (producer)

Sets OffsetDateTime at which the message should appear in the Service Bus queue or topic.

OffsetDateTime

senderAsyncClient (producer)

Autowired Sets SenderAsyncClient to be used in the producer.

ServiceBusSenderAsyncClient

serviceBusTransactionContext (producer)

Represents transaction in service. This object just contains transaction id.

ServiceBusTransactionContext

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

connectionString (security)

Sets the connection string for a Service Bus namespace or a specific Service Bus resource.

String

credentialType (security)

Determines the credential strategy to adopt.

Enum values:

  • AZURE_IDENTITY

  • CONNECTION_STRING

  • TOKEN_CREDENTIAL

CONNECTION_STRING

CredentialType

fullyQualifiedNamespace (security)

Fully Qualified Namespace of the service bus.

String

tokenCredential (security)

A TokenCredential for Azure AD authentication.

TokenCredential

Async Consumer and Producer

This component implements the async Consumer and producer.

This allows camel route to consume and produce events asynchronously without blocking any threads.

Usage

Message Headers

The Azure ServiceBus component supports 25 message header(s), which is/are listed below:

Name Description Default Type

CamelAzureServiceBusApplicationProperties (common)

Constant: APPLICATION_PROPERTIES

The application properties (also known as custom properties) on messages sent and received by the producer and consumer, respectively.

Map

CamelAzureServiceBusContentType (consumer)

Constant: CONTENT_TYPE

Gets the content type of the message.

String

CamelAzureServiceBusDeadLetterErrorDescription (consumer)

Constant: DEAD_LETTER_ERROR_DESCRIPTION

Gets the description for a message that has been dead-lettered.

String

CamelAzureServiceBusDeadLetterReason (consumer)

Constant: DEAD_LETTER_REASON

Gets the reason a message was dead-lettered.

String

CamelAzureServiceBusDeadLetterSource (consumer)

Constant: DEAD_LETTER_SOURCE

Gets the name of the queue or subscription that this message was enqueued on, before it was dead-lettered.

String

CamelAzureServiceBusDeliveryCount (consumer)

Constant: DELIVERY_COUNT

Gets the number of the times this message was delivered to clients.

long

CamelAzureServiceBusEnqueuedSequenceNumber (consumer)

Constant: ENQUEUED_SEQUENCE_NUMBER

Gets the enqueued sequence number assigned to a message by Service Bus.

long

CamelAzureServiceBusEnqueuedTime (consumer)

Constant: ENQUEUED_TIME

Gets the datetime at which this message was enqueued in Azure Service Bus.

OffsetDateTime

CamelAzureServiceBusExpiresAt (consumer)

Constant: EXPIRES_AT

Gets the datetime at which this message will expire.

OffsetDateTime

CamelAzureServiceBusLockToken (consumer)

Constant: LOCK_TOKEN

Gets the lock token for the current message.

String

CamelAzureServiceBusLockedUntil (consumer)

Constant: LOCKED_UNTIL

Gets the datetime at which the lock of this message expires.

OffsetDateTime

CamelAzureServiceBusMessageId (consumer)

Constant: MESSAGE_ID

Gets the identifier for the message.

String

CamelAzureServiceBusPartitionKey (consumer)

Constant: PARTITION_KEY

Gets the partition key for sending a message to a partitioned entity.

String

CamelAzureServiceBusRawAmqpMessage (consumer)

Constant: RAW_AMQP_MESSAGE

The representation of message as defined by AMQP protocol.

AmqpAnnotatedMessage

CamelAzureServiceBusReplyTo (consumer)

Constant: REPLY_TO

Gets the address of an entity to send replies to.

String

CamelAzureServiceBusReplyToSessionId (consumer)

Constant: REPLY_TO_SESSION_ID

Gets or sets a session identifier augmenting the ReplyTo address.

String

CamelAzureServiceBusSequenceNumber (consumer)

Constant: SEQUENCE_NUMBER

Gets the unique number assigned to a message by Service Bus.

long

CamelAzureServiceBusSessionId (consumer)

Constant: SESSION_ID

Gets the session id of the message.

String

CamelAzureServiceBusSubject (consumer)

Constant: SUBJECT

Gets the subject for the message.

String

CamelAzureServiceBusTimeToLive (consumer)

Constant: TIME_TO_LIVE

Gets the duration before this message expires.

Duration

CamelAzureServiceBusTo (consumer)

Constant: TO

Gets the to address.

String

CamelAzureServiceBusScheduledEnqueueTime (common)

Constant: SCHEDULED_ENQUEUE_TIME

(producer)Overrides the OffsetDateTime at which the message should appear in the Service Bus queue or topic. (consumer) Gets the scheduled enqueue time of this message.

OffsetDateTime

CamelAzureServiceBusServiceBusTransactionContext (producer)

Constant: SERVICE_BUS_TRANSACTION_CONTEXT

Overrides the transaction in service. This object just contains transaction id.

ServiceBusTransactionContext

CamelAzureServiceBusProducerOperation (producer)

Constant: PRODUCER_OPERATION

Overrides the desired operation to be used in the producer.

Enum values:

  • sendMessages

  • scheduleMessages

ServiceBusProducerOperationDefinition

CamelAzureServiceBusCorrelationId (common)

Constant: CORRELATION_ID

Gets or Sets a correlation identifier.

String

Authentication Information

You have three different Credential Types: AZURE_IDENTITY, TOKEN_CREDENTIAL and CONNECTION_STRING. You can also provide a client instance yourself. To use this component, you have three options to provide the required Azure authentication information:

CONNECTION_STRING:

  • Provide connectionString string it is the simplest option to get started.

TOKEN_CREDENTIAL:

  • Provide an implementation of com.azure.core.credential.TokenCredential into the Camel’s Registry, e.g., using the com.azure.identity.DefaultAzureCredentialBuilder().build(); API. See the documentation here about Azure-AD authentication.

AZURE_IDENTITY:

  • This will use com.azure.identity.DefaultAzureCredentialBuilder().build(); instance. This will follow the Default Azure Credential Chain. See the documentation here about Azure-AD authentication.

Client instance:

  • You can provide a com.azure.messaging.servicebus.ServiceBusSenderAsyncClient for sending message and/or com.azure.messaging.servicebus.ServiceBusReceiverAsyncClient to receive messages. If you provide the instances, they will be autowired.

Message Body

In the producer, this component accepts message body of String, byte[] and BinaryData types or List<String>, List<byte[]> and List<BinaryData> to send batch messages.

In the consumer, the returned message body will be of type `String.

Azure ServiceBus Producer operations

Operation Description

sendMessages

Sends a set of messages to a Service Bus queue or topic using a batched approach.

scheduleMessages

Sends a scheduled message to the Azure Service Bus entity this sender is connected to. A scheduled message is enqueued and made available to receivers only at the scheduled enqueue time.

Azure ServiceBus Consumer operations

Operation Description

receiveMessages

Receives an <b>infinite</b> stream of messages from the Service Bus entity.

peekMessages

Reads the next batch of active messages without changing the state of the receiver or the message source.

Examples

  • sendMessages

from("direct:start")
  .process(exchange -> {
         final List<Object> inputBatch = new LinkedList<>();
            inputBatch.add("test batch 1");
            inputBatch.add("test batch 2");
            inputBatch.add("test batch 3");
            inputBatch.add(123456);

            exchange.getIn().setBody(inputBatch);
       })
  .to("azure-servicebus:test//?connectionString=test")
  .to("mock:result");

  • scheduleMessages

from("direct:start")
  .process(exchange -> {
         final List<Object> inputBatch = new LinkedList<>();
            inputBatch.add("test batch 1");
            inputBatch.add("test batch 2");
            inputBatch.add("test batch 3");
            inputBatch.add(123456);

            exchange.getIn().setHeader(ServiceBusConstants.SCHEDULED_ENQUEUE_TIME, OffsetDateTime.now());
            exchange.getIn().setBody(inputBatch);
       })
  .to("azure-servicebus:test//?connectionString=test&producerOperation=scheduleMessages")
  .to("mock:result");

  • receiveMessages

from("azure-servicebus:test//?connectionString=test")
  .log("${body}")
  .to("mock:result");

  • peekMessages

from("azure-servicebus:test//?connectionString=test&consumerOperation=peekMessages&peekNumMaxMessages=3")
  .log("${body}")
  .to("mock:result");

Spring Boot Auto-Configuration

When using azure-servicebus with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-azure-servicebus-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 30 options, which are listed below.

Name Description Default Type

camel.component.azure-servicebus.amqp-retry-options

Sets the retry options for Service Bus clients. If not specified, the default retry options are used. The option is a com.azure.core.amqp.AmqpRetryOptions type.

AmqpRetryOptions

camel.component.azure-servicebus.amqp-transport-type

Sets the transport type by which all the communication with Azure Service Bus occurs. Default value is AMQP.

AmqpTransportType

camel.component.azure-servicebus.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.azure-servicebus.binary

Set binary mode. If true, message body will be sent as byte. By default, it is false.

false

Boolean

camel.component.azure-servicebus.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.azure-servicebus.client-options

Sets the ClientOptions to be sent from the client built from this builder, enabling customization of certain properties, as well as support the addition of custom header information. The option is a com.azure.core.util.ClientOptions type.

ClientOptions

camel.component.azure-servicebus.configuration

The component configurations. The option is a org.apache.camel.component.azure.servicebus.ServiceBusConfiguration type.

ServiceBusConfiguration

camel.component.azure-servicebus.connection-string

Sets the connection string for a Service Bus namespace or a specific Service Bus resource.

String

camel.component.azure-servicebus.consumer-operation

Sets the desired operation to be used in the consumer.

ServiceBusConsumerOperationDefinition

camel.component.azure-servicebus.credential-type

Determines the credential strategy to adopt.

CredentialType

camel.component.azure-servicebus.disable-auto-complete

Disables auto-complete and auto-abandon of received messages. By default, a successfully processed message is completed. If an error happens when the message is abandoned.

false

Boolean

camel.component.azure-servicebus.enabled

Whether to enable auto configuration of the azure-servicebus component. This is enabled by default.

Boolean

camel.component.azure-servicebus.fully-qualified-namespace

Fully Qualified Namespace of the service bus.

String

camel.component.azure-servicebus.header-filter-strategy

To use a custom HeaderFilterStrategy to filter Service Bus application properties to and from Camel message headers. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

HeaderFilterStrategy

camel.component.azure-servicebus.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.azure-servicebus.max-auto-lock-renew-duration

Sets the amount of time to continue auto-renewing the lock. Setting ZERO disables auto-renewal. For ServiceBus receive mode (RECEIVE_AND_DELETE RECEIVE_AND_DELETE), auto-renewal is disabled.

Duration

camel.component.azure-servicebus.peek-num-max-messages

Set the max number of messages to be peeked during the peek operation.

Integer

camel.component.azure-servicebus.prefetch-count

Sets the prefetch count of the receiver. For both PEEK_LOCK PEEK_LOCK and RECEIVE_AND_DELETE RECEIVE_AND_DELETE receive modes the default value is 1. Prefetch speeds up the message flow by aiming to have a message readily available for local retrieval when and before the application asks for one using receive message. Setting a non-zero value will prefetch that number of messages. Setting the value to zero turns prefetch off.

Integer

camel.component.azure-servicebus.producer-operation

Sets the desired operation to be used in the producer.

ServiceBusProducerOperationDefinition

camel.component.azure-servicebus.proxy-options

Sets the proxy configuration to use for ServiceBusSenderAsyncClient. When a proxy is configured, AMQP_WEB_SOCKETS must be used for the transport type. The option is a com.azure.core.amqp.ProxyOptions type.

ProxyOptions

camel.component.azure-servicebus.receiver-async-client

Sets the receiverAsyncClient in order to consume messages by the consumer. The option is a com.azure.messaging.servicebus.ServiceBusReceiverAsyncClient type.

ServiceBusReceiverAsyncClient

camel.component.azure-servicebus.reconnect-delay

If the consumer has connection failure to Azure ServiceBus, then delay (millis) some time before re-connecting.

5000

Integer

camel.component.azure-servicebus.scheduled-enqueue-time

Sets OffsetDateTime at which the message should appear in the Service Bus queue or topic.

OffsetDateTime

camel.component.azure-servicebus.sender-async-client

Sets SenderAsyncClient to be used in the producer. The option is a com.azure.messaging.servicebus.ServiceBusSenderAsyncClient type.

ServiceBusSenderAsyncClient

camel.component.azure-servicebus.service-bus-receive-mode

Sets the receive mode for the receiver.

ServiceBusReceiveMode

camel.component.azure-servicebus.service-bus-transaction-context

Represents transaction in service. This object just contains transaction id. The option is a com.azure.messaging.servicebus.ServiceBusTransactionContext type.

ServiceBusTransactionContext

camel.component.azure-servicebus.service-bus-type

The service bus type of connection to execute. Queue is for typical queue option and topic for subscription based model.

ServiceBusType

camel.component.azure-servicebus.sub-queue

Sets the type of the SubQueue to connect to.

SubQueue

camel.component.azure-servicebus.subscription-name

Sets the name of the subscription in the topic to listen to. topicOrQueueName and serviceBusType=topic must also be set. This property is required if serviceBusType=topic and the consumer is in use.

String

camel.component.azure-servicebus.token-credential

A TokenCredential for Azure AD authentication. The option is a com.azure.core.credential.TokenCredential type.

TokenCredential
Back to top