JSON Schema Validator

Since Camel 2.20

Only producer is supported

The JSON Schema Validator component performs bean validation of the message body against JSON Schemas v4, v6, v7, v2019-09 draft and v2020-12(partial) using the NetworkNT JSON Schema library (https://github.com/networknt/json-schema-validator).

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-json-validator</artifactId>
    <version>x.y.z</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

json-validator:resourceUri[?options]

Where resourceUri is some URL to a local resource on the classpath or a full URL to a remote resource or resource on the file system which contains the JSON Schema to validate against.

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The JSON Schema Validator component supports 4 options, which are listed below.

Name Description Default Type

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

useDefaultObjectMapper (producer)

Whether to lookup and use default Jackson ObjectMapper from the registry.

true

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

objectMapper (advanced)

Lookup and use the existing ObjectMapper with the given id.

String

Endpoint Options

The JSON Schema Validator endpoint is configured using URI syntax:

json-validator:resourceUri

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

resourceUri (producer)

Required Path to the resource. You can prefix with: classpath, file, http, ref, or bean. classpath, file and http loads the resource using these protocols (classpath is default). ref will lookup the resource in the registry. bean will call a method on a bean to be used as the resource. For bean you can specify the method name after dot, eg bean:myBean.myMethod.

String

Query Parameters (11 parameters)

Name Description Default Type

allowContextMapAll (producer)

Sets whether the context map should allow access to all details. By default only the message body and headers can be accessed. This option can be enabled for full access to the current Exchange and CamelContext. Doing so impose a potential security risk as this opens access to the full power of CamelContext API.

false

boolean

contentCache (producer)

Sets whether to use resource content cache or not.

false

boolean

failOnNullBody (producer)

Whether to fail if no body exists.

true

boolean

failOnNullHeader (producer)

Whether to fail if no header exists when validating against a header.

true

boolean

headerName (producer)

To validate against a header instead of the message body.

String

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

disabledDeserializationFeatures (advanced)

Comma-separated list of Jackson DeserializationFeature enum values which will be disabled for parsing exchange body.

String

enabledDeserializationFeatures (advanced)

Comma-separated list of Jackson DeserializationFeature enum values which will be enabled for parsing exchange body.

String

errorHandler (advanced)

To use a custom ValidatorErrorHandler. The default error handler captures the errors and throws an exception.

JsonValidatorErrorHandler

objectMapper (advanced)

The used Jackson object mapper.

ObjectMapper

uriSchemaLoader (advanced)

To use a custom schema loader allowing for adding custom format validation. The default implementation will create a schema loader that tries to determine the schema version from the $schema property of the specified schema.

JsonUriSchemaLoader

Example

Assuming we have the following JSON Schema:

myschema.json

{
  "$schema": "http://json-schema.org/draft-04/schema#",
  "definitions": {},
  "id": "my-schema",
  "properties": {
    "id": {
      "default": 1,
      "description": "An explanation about the purpose of this instance.",
      "id": "/properties/id",
      "title": "The id schema",
      "type": "integer"
    },
    "name": {
      "default": "A green door",
      "description": "An explanation about the purpose of this instance.",
      "id": "/properties/name",
      "title": "The name schema",
      "type": "string"
    },
    "price": {
      "default": 12.5,
      "description": "An explanation about the purpose of this instance.",
      "id": "/properties/price",
      "title": "The price schema",
      "type": "number"
    }
  },
  "required": [
    "name",
    "id",
    "price"
  ],
  "type": "object"
}

We can validate incoming JSON with the following Camel route, where myschema.json is loaded from the classpath.

from("direct:start")
  .to("json-validator:myschema.json")
  .to("mock:end")

If you use the default schema loader, it will try to determine the schema version from the $schema property and instruct the validator appropriately. If it can’t find (or doesn’t recognize) the $schema property, it will assume your schema is version 2019-09.

If your schema is local to your application (e.g. a classpath location as opposed to URL), your schema can also contain $ref links to a relative subschema in the classpath. Per the JSON schema spec, your schema must not have an $id identifier property for this to work properly. See the unit test and schema for an example.

Spring Boot Auto-Configuration

When using json-validator with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-json-validator-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 5 options, which are listed below.

Name Description Default Type

camel.component.json-validator.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.json-validator.enabled

Whether to enable auto configuration of the json-validator component. This is enabled by default.

Boolean

camel.component.json-validator.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.json-validator.object-mapper

Lookup and use the existing ObjectMapper with the given id.

String

camel.component.json-validator.use-default-object-mapper

Whether to lookup and use default Jackson ObjectMapper from the registry.

true

Boolean
Back to top