Salesforce

Since Camel 2.12

Both producer and consumer are supported

This component supports producer and consumer endpoints to communicate with Salesforce using Java DTOs. There is a companion maven plugin that generates these DTOs.

Developers wishing to contribute to the component are instructed to look at the README.md file on instructions on how to get started and set up your environment for running integration tests.

Getting Started

Follow these steps to get started with the Salesforce component.

  1. Create a salesforce org. If you don’t already have access to a salesforce org, you can create a free developer org.

  2. Create a Connected App. In salesforce, go to Setup > Apps > App Manager, then click on New Connected App. Make sure to check Enable OAuth Settings and include relevant OAuth Scopes, including the scope called Perform requests at any time. Click Save.

  3. Get the Consumer Key and Consumer Secret. You’ll need these to configure salesforce authentication. View your new connected app, then copy the key and secret and save in a safe place.

  4. Add Maven depdendency.

    <dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-salesforce</artifactId>
</dependency>

    Spring Boot users should use the starter instead.

    <dependency>
    <groupId>org.apache.camel.springboot</groupId>
    <artifactId>camel-salesforce-starter</artifactId>
</dependency>

  5. Generate DTOs. Optionally, generate Java DTOs to represent your salesforce objects. This step isn’t a hard requirement per se, but most use cases will benefit from the type safety and auto-completion. Use the maven plugin to generate DTOs for the salesforce objects you’ll be working with.

  6. Configure authentication. Using the OAuth key and secret, you generated previously, configure salesforce authentication.

  7. Create routes. Starting creating routes that interact with salesforce!

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Salesforce component supports 102 options, which are listed below.

Name Description Default Type

apexMethod (common)

APEX method name.

String

apexQueryParams (common)

Query params for APEX method.

Map

apiVersion (common)

Salesforce API version.

56.0

String

backoffIncrement (common)

Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

1000

long

batchId (common)

Bulk API Batch ID.

String

contentType (common)

Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV.

Enum values:

  • XML

  • CSV

  • JSON

  • ZIP_XML

  • ZIP_CSV

  • ZIP_JSON

ContentType

defaultReplayId (common)

Default replayId setting if no value is found in initialReplayIdMap.

-1

Long

fallBackReplayId (common)

ReplayId to fall back to after an Invalid Replay Id response.

-1

Long

format (common)

Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON. As of Camel 3.12, this option only applies to the Raw operation.

Enum values:

  • JSON

  • XML

PayloadFormat

httpClient (common)

Custom Jetty Http Client to use to connect to Salesforce.

SalesforceHttpClient

httpClientConnectionTimeout (common)

Connection timeout used by the HttpClient when connecting to the Salesforce server.

60000

long

httpClientIdleTimeout (common)

Timeout used by the HttpClient when waiting for response from the Salesforce server.

10000

long

httpMaxContentLength (common)

Max content length of an HTTP response.

Integer

httpRequestBufferSize (common)

HTTP request buffer size. May need to be increased for large SOQL queries.

8192

Integer

httpRequestTimeout (common)

Timeout value for HTTP requests.

60000

long

includeDetails (common)

Include details in Salesforce1 Analytics report, defaults to false.

Boolean

initialReplayIdMap (common)

Replay IDs to start from per channel name.

Map

instanceId (common)

Salesforce1 Analytics report execution instance ID.

String

jobId (common)

Bulk API Job ID.

String

limit (common)

Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.

Integer

locator (common)

Locator provided by salesforce Bulk 2.0 API for use in getting results for a Query job.

String

maxBackoff (common)

Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

30000

long

maxRecords (common)

The maximum number of records to retrieve per set of results for a Bulk 2.0 Query. The request is still subject to the size limits. If you are working with a very large number of query results, you may experience a timeout before receiving all the data from Salesforce. To prevent a timeout, specify the maximum number of records your client is expecting to receive in the maxRecords parameter. This splits the results into smaller sets with this value as the maximum size.

Integer

notFoundBehaviour (common)

Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default.

Enum values:

  • EXCEPTION

  • NULL

EXCEPTION

NotFoundBehaviour

notifyForFields (common)

Notify for fields, options are ALL, REFERENCED, SELECT, WHERE.

Enum values:

  • ALL

  • REFERENCED

  • SELECT

  • WHERE

NotifyForFieldsEnum

notifyForOperationCreate (common)

Notify for create operation, defaults to false (API version >= 29.0).

Boolean

notifyForOperationDelete (common)

Notify for delete operation, defaults to false (API version >= 29.0).

Boolean

notifyForOperations (common)

Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version < 29.0).

Enum values:

  • ALL

  • CREATE

  • EXTENDED

  • UPDATE

NotifyForOperationsEnum

notifyForOperationUndelete (common)

Notify for un-delete operation, defaults to false (API version >= 29.0).

Boolean

notifyForOperationUpdate (common)

Notify for update operation, defaults to false (API version >= 29.0).

Boolean

objectMapper (common)

Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects.

ObjectMapper

packages (common)

In what packages are the generated DTO classes. Typically the classes would be generated using camel-salesforce-maven-plugin. Set it if using the generated DTOs to gain the benefit of using short SObject names in parameters/header values. Multiple packages can be separated by comma.

String

pkChunking (common)

Use PK Chunking. Only for use in original Bulk API. Bulk 2.0 API performs PK chunking automatically, if necessary.

Boolean

pkChunkingChunkSize (common)

Chunk size for use with PK Chunking. If unspecified, salesforce default is 100,000. Maximum size is 250,000.

Integer

pkChunkingParent (common)

Specifies the parent object when you’re enabling PK chunking for queries on sharing objects. The chunks are based on the parent object’s records rather than the sharing object’s records. For example, when querying on AccountShare, specify Account as the parent object. PK chunking is supported for sharing objects as long as the parent object is supported.

String

pkChunkingStartRow (common)

Specifies the 15-character or 18-character record ID to be used as the lower boundary for the first chunk. Use this parameter to specify a starting ID when restarting a job that failed between batches.

String

queryLocator (common)

Query Locator provided by salesforce for use when a query results in more records than can be retrieved in a single call. Use this value in a subsequent call to retrieve additional records.

String

rawPayload (common)

Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default.

false

boolean

reportId (common)

Salesforce1 Analytics report Id.

String

reportMetadata (common)

Salesforce1 Analytics report metadata for filtering.

ReportMetadata

resultId (common)

Bulk API Result ID.

String

sObjectBlobFieldName (common)

SObject blob field name.

String

sObjectClass (common)

Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin.

String

sObjectFields (common)

SObject fields to retrieve.

String

sObjectId (common)

SObject ID if required by API.

String

sObjectIdName (common)

SObject external ID field name.

String

sObjectIdValue (common)

SObject external ID field value.

String

sObjectName (common)

SObject name if required or supported by API.

String

sObjectQuery (common)

Salesforce SOQL query string.

String

sObjectSearch (common)

Salesforce SOSL search string.

String

streamQueryResult (common)

If true, streams SOQL query result and transparently handles subsequent requests if there are multiple pages. Otherwise, results are returned one page at a time.

false

Boolean

updateTopic (common)

Whether to update an existing Push Topic when using the Streaming API, defaults to false.

false

boolean

config (common (advanced))

Global endpoint configuration - use to set values that are common to all endpoints.

SalesforceEndpointConfig

httpClientProperties (common (advanced))

Used to set any properties that can be configured on the underlying HTTP client. Have a look at properties of SalesforceHttpClient and the Jetty HttpClient for all available options.

Map

longPollingTransportProperties (common (advanced))

Used to set any properties that can be configured on the LongPollingTransport used by the BayeuxClient (CometD) used by the streaming api.

Map

workerPoolMaxSize (common (advanced))

Maximum size of the thread pool used to handle HTTP responses.

20

int

workerPoolSize (common (advanced))

Size of the thread pool used to handle HTTP responses.

10

int

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

pubSubBatchSize (consumer)

Max number of events to receive in a batch from the Pub/Sub API.

100

int

pubSubDeserializeType (consumer)

How to deserialize events consume from the Pub/Sub API. AVRO will try a SpecificRecord subclass if found, otherwise GenericRecord.

Enum values:

  • AVRO

  • SPECIFIC_RECORD

  • GENERIC_RECORD

  • POJO

  • JSON

AVRO

PubSubDeserializeType

pubSubPojoClass (consumer)

Fully qualified class name to deserialize Pub/Sub API event to.

String

replayPreset (consumer)

Replay preset for Pub/Sub API.

Enum values:

  • LATEST

  • EARLIEST

  • CUSTOM

LATEST

ReplayPreset

allOrNone (producer)

Composite API option to indicate to rollback all records if any are not successful.

false

boolean

apexUrl (producer)

APEX method URL.

String

compositeMethod (producer)

Composite (raw) method.

String

eventName (producer)

Name of Platform Event, Change Data Capture Event, custom event, etc.

String

eventSchemaFormat (producer)

EXPANDED: Apache Avro format but doesn’t strictly adhere to the record complex type. COMPACT: Apache Avro, adheres to the specification for the record complex type. This parameter is available in API version 43.0 and later.

Enum values:

  • EXPANDED

  • COMPACT

EventSchemaFormatEnum

eventSchemaId (producer)

The ID of the event schema.

String

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

rawHttpHeaders (producer)

Comma separated list of message headers to include as HTTP parameters for Raw operation.

String

rawMethod (producer)

HTTP method to use for the Raw operation.

String

rawPath (producer)

The portion of the endpoint URL after the domain name. E.g., '/services/data/v52.0/sobjects/Account/'.

String

rawQueryParameters (producer)

Comma separated list of message headers to include as query parameters for Raw operation. Do not url-encode values as this will be done automatically.

String

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

httpProxyExcludedAddresses (proxy)

A list of addresses for which HTTP proxy server should not be used.

Set

httpProxyHost (proxy)

Hostname of the HTTP proxy server to use.

String

httpProxyIncludedAddresses (proxy)

A list of addresses for which HTTP proxy server should be used.

Set

httpProxyPort (proxy)

Port number of the HTTP proxy server to use.

Integer

httpProxySocks4 (proxy)

If set to true the configures the HTTP proxy to use as a SOCKS4 proxy.

false

boolean

pubsubAllowUseSystemProxy (proxy)

Allow the Pub/Sub API client to use the proxy detected by java.net.ProxySelector. If false then no proxy server will be used.

true

boolean

authenticationType (security)

Explicit authentication method to be used, one of USERNAME_PASSWORD, REFRESH_TOKEN, CLIENT_CREDENTIALS, or JWT. Salesforce component can auto-determine the authentication method to use from the properties set, set this property to eliminate any ambiguity.

Enum values:

  • USERNAME_PASSWORD

  • REFRESH_TOKEN

  • CLIENT_CREDENTIALS

  • JWT

AuthenticationType

clientId (security)

Required OAuth Consumer Key of the connected app configured in the Salesforce instance setup. Typically a connected app needs to be configured but one can be provided by installing a package.

String

clientSecret (security)

OAuth Consumer Secret of the connected app configured in the Salesforce instance setup.

String

httpProxyAuthUri (security)

Used in authentication against the HTTP proxy server, needs to match the URI of the proxy server in order for the httpProxyUsername and httpProxyPassword to be used for authentication.

String

httpProxyPassword (security)

Password to use to authenticate against the HTTP proxy server.

String

httpProxyRealm (security)

Realm of the proxy server, used in preemptive Basic/Digest authentication methods against the HTTP proxy server.

String

httpProxySecure (security)

If set to false disables the use of TLS when accessing the HTTP proxy.

true

boolean

httpProxyUseDigestAuth (security)

If set to true Digest authentication will be used when authenticating to the HTTP proxy, otherwise Basic authorization method will be used.

false

boolean

httpProxyUsername (security)

Username to use to authenticate against the HTTP proxy server.

String

instanceUrl (security)

URL of the Salesforce instance used after authentication, by default received from Salesforce on successful authentication.

String

jwtAudience (security)

Value to use for the Audience claim (aud) when using OAuth JWT flow. If not set, the login URL will be used, which is appropriate in most cases.

String

keystore (security)

KeyStore parameters to use in OAuth JWT flow. The KeyStore should contain only one entry with private key and certificate. Salesforce does not verify the certificate chain, so this can easily be a selfsigned certificate. Make sure that you upload the certificate to the corresponding connected app.

KeyStoreParameters

lazyLogin (security)

If set to true prevents the component from authenticating to Salesforce with the start of the component. You would generally set this to the (default) false and authenticate early and be immediately aware of any authentication issues. Lazy login is not supported by salesforce consumers.

false

boolean

loginConfig (security)

All authentication configuration in one nested bean, all properties set there can be set directly on the component as well.

SalesforceLoginConfig

loginUrl (security)

Required URL of the Salesforce instance used for authentication, by default set to https://login.salesforce.com.

https://login.salesforce.com

String

password (security)

Password used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows. Make sure that you append security token to the end of the password if using one.

String

pubSubHost (security)

Pub/Sub host.

api.pubsub.salesforce.com

String

pubSubPort (security)

Pub/Sub port.

7443

int

refreshToken (security)

Refresh token already obtained in the refresh token OAuth flow. One needs to setup a web application and configure a callback URL to receive the refresh token, or configure using the builtin callback at https://login.salesforce.com/services/oauth2/success or https://test.salesforce.com/services/oauth2/success and then retrive the refresh_token from the URL at the end of the flow. Note that in development organizations Salesforce allows hosting the callback web application at localhost.

String

sslContextParameters (security)

SSL parameters to use, see SSLContextParameters class for all available options.

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

userName (security)

Username used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows.

String

Endpoint Options

The Salesforce endpoint is configured using URI syntax:

salesforce:operationName:topicName

With the following path and query parameters:

Path Parameters (2 parameters)

Name Description Default Type

operationName (common)

Required The operation to use.

Enum values:

  • getVersions

  • getResources

  • getGlobalObjects

  • getBasicInfo

  • getDescription

  • getSObject

  • createSObject

  • updateSObject

  • deleteSObject

  • getSObjectWithId

  • upsertSObject

  • deleteSObjectWithId

  • getBlobField

  • query

  • queryMore

  • queryAll

  • search

  • apexCall

  • recent

  • getEventSchema

  • createJob

  • getJob

  • closeJob

  • abortJob

  • createBatch

  • getBatch

  • getAllBatches

  • getRequest

  • getResults

  • createBatchQuery

  • getQueryResultIds

  • getQueryResult

  • getRecentReports

  • getReportDescription

  • executeSyncReport

  • executeAsyncReport

  • getReportInstances

  • getReportResults

  • limits

  • approval

  • approvals

  • composite-tree

  • composite-batch

  • composite

  • compositeRetrieveSObjectCollections

  • compositeCreateSObjectCollections

  • compositeUpdateSObjectCollections

  • compositeUpsertSObjectCollections

  • compositeDeleteSObjectCollections

  • bulk2GetAllJobs

  • bulk2CreateJob

  • bulk2GetJob

  • bulk2CreateBatch

  • bulk2CloseJob

  • bulk2AbortJob

  • bulk2DeleteJob

  • bulk2GetSuccessfulResults

  • bulk2GetFailedResults

  • bulk2GetUnprocessedRecords

  • bulk2CreateQueryJob

  • bulk2GetQueryJob

  • bulk2GetAllQueryJobs

  • bulk2GetQueryJobResults

  • bulk2AbortQueryJob

  • bulk2DeleteQueryJob

  • raw

  • subscribe

  • pubSubSubscribe

  • pubSubPublish

OperationName

topicName (producer)

The name of the topic/channel to use.

String

Query Parameters (66 parameters)

Name Description Default Type

apexMethod (common)

APEX method name.

String

apexQueryParams (common)

Query params for APEX method.

Map

apiVersion (common)

Salesforce API version.

56.0

String

backoffIncrement (common)

Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

1000

long

batchId (common)

Bulk API Batch ID.

String

contentType (common)

Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV.

Enum values:

  • XML

  • CSV

  • JSON

  • ZIP_XML

  • ZIP_CSV

  • ZIP_JSON

ContentType

defaultReplayId (common)

Default replayId setting if no value is found in initialReplayIdMap.

-1

Long

fallBackReplayId (common)

ReplayId to fall back to after an Invalid Replay Id response.

-1

Long

format (common)

Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON. As of Camel 3.12, this option only applies to the Raw operation.

Enum values:

  • JSON

  • XML

PayloadFormat

httpClient (common)

Custom Jetty Http Client to use to connect to Salesforce.

SalesforceHttpClient

includeDetails (common)

Include details in Salesforce1 Analytics report, defaults to false.

Boolean

initialReplayIdMap (common)

Replay IDs to start from per channel name.

Map

instanceId (common)

Salesforce1 Analytics report execution instance ID.

String

jobId (common)

Bulk API Job ID.

String

limit (common)

Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.

Integer

locator (common)

Locator provided by salesforce Bulk 2.0 API for use in getting results for a Query job.

String

maxBackoff (common)

Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

30000

long

maxRecords (common)

The maximum number of records to retrieve per set of results for a Bulk 2.0 Query. The request is still subject to the size limits. If you are working with a very large number of query results, you may experience a timeout before receiving all the data from Salesforce. To prevent a timeout, specify the maximum number of records your client is expecting to receive in the maxRecords parameter. This splits the results into smaller sets with this value as the maximum size.

Integer

notFoundBehaviour (common)

Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default.

Enum values:

  • EXCEPTION

  • NULL

EXCEPTION

NotFoundBehaviour

notifyForFields (common)

Notify for fields, options are ALL, REFERENCED, SELECT, WHERE.

Enum values:

  • ALL

  • REFERENCED

  • SELECT

  • WHERE

NotifyForFieldsEnum

notifyForOperationCreate (common)

Notify for create operation, defaults to false (API version >= 29.0).

Boolean

notifyForOperationDelete (common)

Notify for delete operation, defaults to false (API version >= 29.0).

Boolean

notifyForOperations (common)

Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version < 29.0).

Enum values:

  • ALL

  • CREATE

  • EXTENDED

  • UPDATE

NotifyForOperationsEnum

notifyForOperationUndelete (common)

Notify for un-delete operation, defaults to false (API version >= 29.0).

Boolean

notifyForOperationUpdate (common)

Notify for update operation, defaults to false (API version >= 29.0).

Boolean

objectMapper (common)

Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects.

ObjectMapper

pkChunking (common)

Use PK Chunking. Only for use in original Bulk API. Bulk 2.0 API performs PK chunking automatically, if necessary.

Boolean

pkChunkingChunkSize (common)

Chunk size for use with PK Chunking. If unspecified, salesforce default is 100,000. Maximum size is 250,000.

Integer

pkChunkingParent (common)

Specifies the parent object when you’re enabling PK chunking for queries on sharing objects. The chunks are based on the parent object’s records rather than the sharing object’s records. For example, when querying on AccountShare, specify Account as the parent object. PK chunking is supported for sharing objects as long as the parent object is supported.

String

pkChunkingStartRow (common)

Specifies the 15-character or 18-character record ID to be used as the lower boundary for the first chunk. Use this parameter to specify a starting ID when restarting a job that failed between batches.

String

queryLocator (common)

Query Locator provided by salesforce for use when a query results in more records than can be retrieved in a single call. Use this value in a subsequent call to retrieve additional records.

String

rawPayload (common)

Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default.

false

boolean

reportId (common)

Salesforce1 Analytics report Id.

String

reportMetadata (common)

Salesforce1 Analytics report metadata for filtering.

ReportMetadata

resultId (common)

Bulk API Result ID.

String

sObjectBlobFieldName (common)

SObject blob field name.

String

sObjectClass (common)

Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin.

String

sObjectFields (common)

SObject fields to retrieve.

String

sObjectId (common)

SObject ID if required by API.

String

sObjectIdName (common)

SObject external ID field name.

String

sObjectIdValue (common)

SObject external ID field value.

String

sObjectName (common)

SObject name if required or supported by API.

String

sObjectQuery (common)

Salesforce SOQL query string.

String

sObjectSearch (common)

Salesforce SOSL search string.

String

streamQueryResult (common)

If true, streams SOQL query result and transparently handles subsequent requests if there are multiple pages. Otherwise, results are returned one page at a time.

false

Boolean

updateTopic (common)

Whether to update an existing Push Topic when using the Streaming API, defaults to false.

false

boolean

pubSubBatchSize (consumer)

Max number of events to receive in a batch from the Pub/Sub API.

100

int

pubSubDeserializeType (consumer)

How to deserialize events consume from the Pub/Sub API. AVRO will try a SpecificRecord subclass if found, otherwise GenericRecord.

Enum values:

  • AVRO

  • SPECIFIC_RECORD

  • GENERIC_RECORD

  • POJO

  • JSON

AVRO

PubSubDeserializeType

pubSubPojoClass (consumer)

Fully qualified class name to deserialize Pub/Sub API event to.

String

pubSubReplayId (consumer)

The replayId value to use when subscribing to the Pub/Sub API.

String

replayId (consumer)

The replayId value to use when subscribing to the Streaming API.

Long

replayPreset (consumer)

Replay preset for Pub/Sub API.

Enum values:

  • LATEST

  • EARLIEST

  • CUSTOM

LATEST

ReplayPreset

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

allOrNone (producer)

Composite API option to indicate to rollback all records if any are not successful.

false

boolean

apexUrl (producer)

APEX method URL.

String

compositeMethod (producer)

Composite (raw) method.

String

eventName (producer)

Name of Platform Event, Change Data Capture Event, custom event, etc.

String

eventSchemaFormat (producer)

EXPANDED: Apache Avro format but doesn’t strictly adhere to the record complex type. COMPACT: Apache Avro, adheres to the specification for the record complex type. This parameter is available in API version 43.0 and later.

Enum values:

  • EXPANDED

  • COMPACT

EventSchemaFormatEnum

eventSchemaId (producer)

The ID of the event schema.

String

rawHttpHeaders (producer)

Comma separated list of message headers to include as HTTP parameters for Raw operation.

String

rawMethod (producer)

HTTP method to use for the Raw operation.

String

rawPath (producer)

The portion of the endpoint URL after the domain name. E.g., '/services/data/v52.0/sobjects/Account/'.

String

rawQueryParameters (producer)

Comma separated list of message headers to include as query parameters for Raw operation. Do not url-encode values as this will be done automatically.

String

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

Message Headers

The Salesforce component supports 20 message header(s), which is/are listed below:

Name Description Default Type

CamelSalesforceReplayId (consumer)

Constant: HEADER_SALESFORCE_REPLAY_ID

The Streaming API replayId.

Object

CamelSalesforcePubSubReplayId (consumer)

Constant: HEADER_SALESFORCE_PUBSUB_REPLAY_ID

The Pub/Sub API replayId.

Object

CamelSalesforceChangeEventSchema (consumer)

Constant: HEADER_SALESFORCE_CHANGE_EVENT_SCHEMA

The change event schema.

Object

CamelSalesforceEventType (consumer)

Constant: HEADER_SALESFORCE_EVENT_TYPE

The event type.

String

CamelSalesforceCommitTimestamp (consumer)

Constant: HEADER_SALESFORCE_COMMIT_TIMESTAMP

The commit timestamp.

Object

CamelSalesforceCommitUser (consumer)

Constant: HEADER_SALESFORCE_COMMIT_USER

The commit user.

Object

CamelSalesforceCommitNumber (consumer)

Constant: HEADER_SALESFORCE_COMMIT_NUMBER

The commit number.

Object

CamelSalesforceRecordIds (consumer)

Constant: HEADER_SALESFORCE_RECORD_IDS

The record ids.

Object

CamelSalesforceChangeType (consumer)

Constant: HEADER_SALESFORCE_CHANGE_TYPE

The change type.

Object

CamelSalesforceChangeOrigin (consumer)

Constant: HEADER_SALESFORCE_CHANGE_ORIGIN

The change origin.

Object

CamelSalesforceTransactionKey (consumer)

Constant: HEADER_SALESFORCE_TRANSACTION_KEY

The transaction key.

Object

CamelSalesforceSequenceNumber (consumer)

Constant: HEADER_SALESFORCE_SEQUENCE_NUMBER

The sequence number.

Object

CamelSalesforceIsTransactionEnd (consumer)

Constant: HEADER_SALESFORCE_IS_TRANSACTION_END

Is transaction end.

Object

CamelSalesforceEntityName (consumer)

Constant: HEADER_SALESFORCE_ENTITY_NAME

The entity name.

Object

CamelSalesforcePlatformEventSchema (consumer)

Constant: HEADER_SALESFORCE_PLATFORM_EVENT_SCHEMA

The platform event schema.

Object

CamelSalesforceCreatedDate (consumer)

Constant: HEADER_SALESFORCE_CREATED_DATE

The created date.

ZonedDateTime

CamelSalesforceTopicName (consumer)

Constant: HEADER_SALESFORCE_TOPIC_NAME

The topic name.

String

CamelSalesforceChannel (consumer)

Constant: HEADER_SALESFORCE_CHANNEL

The channel.

String

CamelSalesforceClientId (consumer)

Constant: HEADER_SALESFORCE_CLIENT_ID

The client id.

String

CamelSalesforceQueryResultTotalSize (producer)

Constant: HEADER_SALESFORCE_QUERY_RESULT_TOTAL_SIZE

Total number of records matching a query.

int

Usage

Authenticating to Salesforce

The component supports three OAuth authentication flows:

For each of the flows, different sets of properties need to be set:

Table 1. Properties to set for each authentication flow
Property Where to find it on Salesforce Flow

clientId

Connected App, Consumer Key

All flows

clientSecret

Connected App, Consumer Secret

Username-Password, Refresh Token, Client Credentials

userName

Salesforce user username

Username-Password, JWT Bearer Token

password

Salesforce user password

Username-Password

refreshToken

From OAuth flow callback

Refresh Token

keystore

Connected App, Digital Certificate

JWT Bearer Token

The component auto determines what flow you’re trying to configure. In order to be explicit, set the authenticationType property.

Using Username-Password Flow in production is not encouraged.

The certificate used in JWT Bearer Token Flow can be a self-signed certificate. The KeyStore holding the certificate and the private key must contain only a single certificate-private key entry.

General Usage

URI format

When used as a consumer, receiving streaming events, the URI scheme is:

salesforce:subscribe:topic?options

When used as a producer, invoking the Salesforce REST APIs, the URI scheme is:

salesforce:operationName?options

As a general example on using the operations in this salesforce component, the following producer endpoint uses the upsertSObject API, with the sObjectIdName parameter specifying 'Name' as the external id field. The request message body should be an SObject DTO generated using the maven plugin.

...to("salesforce:upsertSObject?sObjectIdName=Name")...

Passing in Salesforce headers and fetching Salesforce response headers

There is support to pass Salesforce headers via inbound message headers, header names that start with Sforce or x-sfdc on the Camel message will be passed on in the request, and response headers that start with Sforce will be present in the outbound message headers.

For example, to fetch API limits, you can specify:

// in your Camel route set the header before Salesforce endpoint
//...
  .setHeader("Sforce-Limit-Info", constant("api-usage"))
  .to("salesforce:getGlobalObjects")
  .to(myProcessor);

// myProcessor will receive `Sforce-Limit-Info` header on the outbound
// message
class MyProcessor implements Processor {
    public void process(Exchange exchange) throws Exception {
        Message in = exchange.getIn();
        String apiLimits = in.getHeader("Sforce-Limit-Info", String.class);
   }
}

In addition, HTTP response status code and text are available as headers Exchange.HTTP_RESPONSE_CODE and Exchange.HTTP_RESPONSE_TEXT.

Sending null values to salesforce

By default, SObject fields with null values are not sent to salesforce. In order to send null values to salesforce, use the fieldsToNull property, as follows:

accountSObject.getFieldsToNull().add("Site");

Supported Salesforce APIs

Camel supports the following Salesforce APIs:

REST API

The following operations are supported:

Unless otherwise specified, DTO types for the following options are from org.apache.camel.component.salesforce.api.dto or one if its sub-packages.

Versions

getVersions

Lists summary information about each Salesforce version currently available, including the version, label, and a link to each version’s root.

Output

Type: List<Version>

Resources by Version

getResources

Lists available resources for the current API version, including resource name and URI.

Output

Type: Map<String, String>

Limits

limits

Lists information about limits in your org. For each limit, this resource returns the maximum allocation and the remaining allocation based on usage.

Output

Type: Limits

Additional Usage Information

With salesforce:limits operation you can fetch of API limits from Salesforce and then act upon that data received. The result of salesforce:limits operation is mapped to org.apache.camel.component.salesforce.api.dto.Limits class and can be used in a custom processors or expressions.

For instance, consider that you need to limit the API usage of Salesforce so that 10% of daily API requests is left for other routes. The body of output message contains an instance of org.apache.camel.component.salesforce.api.dto.Limits object that can be used in conjunction with Content Based Router and Content Based Router and Spring Expression Language (SpEL) to choose when to perform queries.

Notice how multiplying 1.0 with the integer value held in body.dailyApiRequests.remaining makes the expression evaluate as with floating point arithmetic, without it - it would end up making integral division which would result with either 0 (some API limits consumed) or 1 (no API limits consumed).

from("direct:querySalesforce")
    .to("salesforce:limits")
    .choice()
    .when(spel("#{1.0 * body.dailyApiRequests.remaining / body.dailyApiRequests.max < 0.1}"))
        .to("salesforce:query?...")
    .otherwise()
        .setBody(constant("Used up Salesforce API limits, leaving 10% for critical routes"))
    .endChoice()
Recently Viewed Items

recent

Gets the most recently accessed items that were viewed or referenced by the current user. Salesforce stores information about record views in the interface and uses it to generate a list of recently viewed and referenced records, such as in the sidebar and for the auto-complete options in search.

Parameter Type Description Default Required

limit

int

An optional limit that specifies the maximum number of records to be returned. If this parameter is not specified, the default maximum number of records returned is the maximum number of entries in RecentlyViewed, which is 200 records per object.

Output

Type: List<RecentItem>

Additional Usage Information

To fetch the recent items use salesforce:recent operation. This operation returns an java.util.List of org.apache.camel.component.salesforce.api.dto.RecentItem objects (List<RecentItem>) that in turn contain the Id, Name and Attributes (with type and url properties). You can limit the number of returned items by specifying limit parameter set to maximum number of records to return. For example:

from("direct:fetchRecentItems")
    to("salesforce:recent")
        .split().body()
            .log("${body.name} at ${body.attributes.url}");
Describe Global

getGlobalObjects

Lists the available objects and their metadata for your organization’s data. In addition, it provides the organization encoding, as well as the maximum batch size permitted in queries.

Output

Type: GlobalObjects

sObject Basic Information

getBasicInfo

Describes the individual metadata for the specified object.

Parameter Type Description Default Required

sObjectName

String

Name of SObject, e.g. Account. Alternatively, can be supplied in Body.

x

Output

Type: SObjectBasicInfo

sObject Describe

getDescription

Completely describes the individual metadata at all levels for the specified object. For example, this can be used to retrieve the fields, URLs, and child relationships for the Account object.

Parameter Type Description Default Required

sObjectName

String

Name of SObject, e.g. Account. Alternatively, can be supplied in Body.

x

Output

Type: SObjectDescription

Retrieve SObject

getSObject

Accesses record based on the specified object ID. This operation requires the packages option to be set.

Parameter Type Description Default Required

sObjectName

String

Name of SObject, e.g. Account

x

sObjectId

String

Id of record to retrieve.

x

sObjectFields

String

Comma-separated list of fields to retrieve

Body

AbstractSObjectBase

Instance of SObject that is used to query salesforce. If supplied, overrides sObjectName and sObjectId parameters.

Output

Type: Subclass of AbstractSObjectBase

Retrieve SObject by External Id

getSObjectWithId

Accesses record based on an External ID value. This operation requires the packages option to be set.

Parameter Type Description Default Required

sObjectIdName

String

Name of External ID field

x

sObjectIdValue

String

External ID value

x

sObjectName

String

Name of SObject, e.g. Account

x

Body

AbstractSObjectBase

Instance of SObject that is used to query salesforce. If supplied, overrides sObjectName and sObjectIdValue parameters.

Output

Type: Subclass of AbstractSObjectBase

sObject Blob Retrieve

getBlobField

Retrieves the specified blob field from an individual record.

Parameter Type Description Default Required

sObjectBlobFieldName

String

SOSL query

x

sObjectName

String

Name of SObject, e.g., Account

Required if SObject not supplied in body

sObjectId

String

Id of SObject

Required if SObject not supplied in body

Body

AbstractSObjectBase

SObject to determine type and Id from. If not supplied, sObjectId and sObjectName parameters will be used.

Required if sObjectId and sObjectName are not supplied

Output

Type: InputStream

Create SObject

createSObject

Creates a record in salesforce.

Parameter Type Description Default Required

Body

AbstractSObjectBase or String

Instance of SObject to create.

x

sObjectName

String

Name of SObject, e.g. Account. Only used if Camel cannot determine from Body.

If Body is a String

Output

Type: CreateSObjectResult

Update SObject

updateSObject

Updates a record in salesforce.

Parameter Type Description Default Required

Body

AbstractSObjectBase or String

Instance of SObject to update.

x

sObjectName

String

Name of SObject, e.g. Account. Only used if Camel cannot determine from Body.

If Body is a String

sObjectId

String

Id of record to update. Only used if Camel cannot determine from Body.

If Body is a String
Upsert SObject

upsertSObject

Upserts a record by External ID.

Parameter Type Description Default Required

Body

AbstractSObjectBase or String

SObject to update.

x

sObjectIdName

String

External ID field name.

x

sObjectIdValue

String

External ID value

If Body is a String

sObjectName

String

Name of SObject, e.g. Account. Only used if Camel cannot determine from Body.

If Body is a String

Output

Type: UpsertSObjectResult

Delete SObject

deleteSObject

Deletes a record in salesforce.

Parameter Type Description Default Required

Body

AbstractSObjectBase

Instance of SObject to delete.

sObjectName

String

Name of SObject, e.g. Account. Only used if Camel cannot determine from Body.

If Body is not an AbstractSObjectBase instance

sObjectId

String

Id of record to delete.

If Body is not an AbstractSObjectBase instance
Delete SObject by External Id

deleteSObjectWithId

Deletes a record in salesforce by External ID.

Parameter Type Description Default Required

Body

AbstractSObjectBase

Instance of SObject to delete.

sObjectIdName

String

Name of External ID field

If Body is not an AbstractSObjectBase instance

sObjectIdValue

String

External ID value

If Body is not an AbstractSObjectBase instance

sObjectName

String

Name of SObject, e.g. Account. Only used if Camel cannot determine from Body.

If Body is not an AbstractSObjectBase instance
Query

query

Runs a Salesforce SOQL query. If neither sObjectClass nor sObjectName are set, Camel will attempt to determine the correct AbstractQueryRecordsBase sublcass based on the response.

Parameter Type Description Default Required

Body or sObjectQuery

String

SOQL query

x

streamQueryResult

Boolean

If true, returns a streaming Iterator and transparently retrieves all pages as needed. The sObjectClass option must reference an AbstractQueryRecordsBase subclass.

false

sObjectClass

String

Fully qualified name of class to deserialize response to. Usually a subclass of AbstractQueryRecordsBase, e.g. org.my.dto.QueryRecordsAccount

sObjectName

String

Simple name of class to deserialize response to. Usually a subclass of AbstractQueryRecordsBase, e.g. QueryRecordsAccount. Requires the package option be set.

Output

Type: Instance of class supplied in sObjectClass, or Iterator<SomeSObject> if streamQueryResult is true. If streamQueryResult is true, the header CamelSalesforceQueryResultTotalSize is set to the number of records that matched the query.

Query More

queryMore

Retrieves more results (in case of large number of results) using result link returned from the query and queryAll operations. If neither sObjectClass nor sObjectName are set, Camel will attempt to determine the correct AbstractQueryRecordsBase sublcass based on the response.

Parameter Type Description Default Required

Body or sObjectQuery

String

nextRecords value. Can be found in a prior query result in the AbstractQueryRecordsBase.nextRecordsUrl property

X

sObjectClass

String

Fully qualified name of class to deserialize response to. Usually a subclass of AbstractQueryRecordsBase, e.g. org.my.dto.QueryRecordsAccount

sObjectName

String

Simple name of class to deserialize response to. Usually a subclass of AbstractQueryRecordsBase, e.g. QueryRecordsAccount. Requires the package option be set.

Output

Type: Instance of class supplied in sObjectClass

Query All

queryAll

Executes the specified SOQL query. Unlike the query operation , queryAll returns records that are deleted because of a merge or delete. It also returns information about archived task and event records. If neither sObjectClass nor sObjectName are set, Camel will attempt to determine the correct AbstractQueryRecordsBase sublcass based on the response.

Parameter Type Description Default Required

Body or sObjectQuery

String

SOQL query

x

streamQueryResult

Boolean

If true, returns a streaming Iterable and transparently retrieves all pages as needed. The sObjectClass option must reference an AbstractQueryRecordsBase subclass.

false

sObjectClass

String

Fully qualified name of class to deserialize response to. Usually a subclass of AbstractQueryRecordsBase, e.g. org.my.dto.QueryRecordsAccount

sObjectName

String

Simple name of class to deserialize response to. Usually a subclass of AbstractQueryRecordsBase, e.g. QueryRecordsAccount. Requires the package option be set.

Output

Type: Instance of class supplied in sObjectClass, or Iterator<SomeSObject> if streamQueryResult is true.

search

Runs a Salesforce SOSL search

Parameter Type Description Default Required

Body or sObjectSearch

String

Name of field to retrieve

x

Output

Type: SearchResult2

Submit Approval

approval

Submit a record or records (batch) for approval process.

Parameter Type Description Default Required

Body

ApprovalRequest or List<ApprovalRequest>

ApprovalRequest(s) to process

Approval.

Prefixed headers or endpoint options in lieu of passing an ApprovalRequest in the body.

Output

Type: ApprovalResult

Additional usage information

All the properties are named exactly the same as in the Salesforce REST API prefixed with approval.. You can set approval properties by setting approval.PropertyName of the Endpoint these will be used as template — meaning that any property not present in either body or header will be taken from the Endpoint configuration. Or you can set the approval template on the Endpoint by assigning approval property to a reference onto a bean in the Registry.

You can also provide header values using the same approval.PropertyName in the incoming message headers.

And finally body can contain one AprovalRequest or an Iterable of ApprovalRequest objects to process as a batch.

The important thing to remember is the priority of the values specified in these three mechanisms:

  1. value in body takes precedence before any other

  2. value in message header takes precedence before template value

  3. value in template is set if no other value in header or body was given

For example, to send one record for approval using values in headers use:

Given a route:

from("direct:example1")//
        .setHeader("approval.ContextId", simple("${body['contextId']}"))
        .setHeader("approval.NextApproverIds", simple("${body['nextApproverIds']}"))
        .to("salesforce:approval?"//
            + "approval.actionType=Submit"//
            + "&approval.comments=this is a test"//
            + "&approval.processDefinitionNameOrId=Test_Account_Process"//
            + "&approval.skipEntryCriteria=true");

You could send a record for approval using:

final Map<String, String> body = new HashMap<>();
body.put("contextId", accountIds.iterator().next());
body.put("nextApproverIds", userId);

final ApprovalResult result = template.requestBody("direct:example1", body, ApprovalResult.class);
Get Approvals

approvals

Returns a list of all approval processes.

Output

Type: Approvals

Composite

composite

Executes up to 25 REST API requests in a single call. You can use the output of one request as the input to a subsequent request. The response bodies and HTTP statuses of the requests are returned in a single response body. The entire series of requests counts as a single call toward your API limits. Use Salesforce Composite API to submit multiple chained requests. Individual requests and responses are linked with the provided reference.

Parameter Type Description Default Required

Body

SObjectComposite

Contains REST API sub-requests to be executed.

x

rawPayload

Boolean

Any (un)marshaling of requests and responses are assumed to be handled by the route

false

x

compositeMethod

String

HTTP method to use for rawPayload requests.

POST

Output

Type: SObjectCompositeResponse

Composite API supports only JSON payloads.

As with the batch API, the results can vary from API to API so the body of each SObjectCompositeResult instance is given as a java.lang.Object. In most cases the result will be a java.util.Map with string keys and values or other java.util.Map as value. Requests are made in JSON format hold some type information (i.e., it is known what values are strings and what values are numbers).

Let’s look at an example:

SObjectComposite composite = new SObjectComposite("38.0", true);

// first insert operation via an external id
final Account updateAccount = new TestAccount();
updateAccount.setName("Salesforce");
updateAccount.setBillingStreet("Landmark @ 1 Market Street");
updateAccount.setBillingCity("San Francisco");
updateAccount.setBillingState("California");
updateAccount.setIndustry(Account_IndustryEnum.TECHNOLOGY);
composite.addUpdate("Account", "001xx000003DIpcAAG", updateAccount, "UpdatedAccount");

final Contact newContact = new TestContact();
newContact.setLastName("John Doe");
newContact.setPhone("1234567890");
composite.addCreate(newContact, "NewContact");

final AccountContactJunction__c junction = new AccountContactJunction__c();
junction.setAccount__c("001xx000003DIpcAAG");
junction.setContactId__c("@{NewContact.id}");
composite.addCreate(junction, "JunctionRecord");

final SObjectCompositeResponse response = template.requestBody("salesforce:composite", composite, SObjectCompositeResponse.class);
final List<SObjectCompositeResult> results = response.getCompositeResponse();

final SObjectCompositeResult accountUpdateResult = results.stream().filter(r -> "UpdatedAccount".equals(r.getReferenceId())).findFirst().get()
final int statusCode = accountUpdateResult.getHttpStatusCode(); // should be 200
final Map<String, ?> accountUpdateBody = accountUpdateResult.getBody();

final SObjectCompositeResult contactCreationResult = results.stream().filter(r -> "JunctionRecord".equals(r.getReferenceId())).findFirst().get()

Using the rawPayload option

It’s possible to directly call Salesforce composite by preparing the Salesforce JSON request in the route thanks to the rawPayload option.

For instance, you can have the following route:

from("timer:fire?period=2000").setBody(constant("{\n" +
     " \"allOrNone\" : true,\n" +
     " \"records\" : [ { \n" +
     "   \"attributes\" : {\"type\" : \"FOO\"},\n" +
     "   \"Name\" : \"123456789\",\n" +
     "   \"FOO\" : \"XXXX\",\n" +
     "   \"ACCOUNT\" : 2100.0\n" +
     "   \"ExternalID\" : \"EXTERNAL\"\n"
     " }]\n" +
     "}")
   .to("salesforce:composite?rawPayload=true")
   .log("${body}");

The route directly creates the body as JSON and directly submit to salesforce endpoint using rawPayload=true option.

With this approach, you have complete control on the Salesforce request.

POST is the default HTTP method used to send raw Composite requests to salesforce. Use the compositeMethod option to override to the other supported value, GET, which returns a list of other available composite resources.

Composite Tree

composite-tree

Create up to 200 records with parent-child relationships (up to 5 levels) in one go.

Parameter Type Description Default Required

Body

SObjectTree

Contains REST API sub-requests to be executed.

x

Output

Type: SObjectTree

To create up to 200 records including parent-child relationships use salesforce:composite-tree operation. This requires an instance of org.apache.camel.component.salesforce.api.dto.composite.SObjectTree in the input message and returns the same tree of objects in the output message. The org.apache.camel.component.salesforce.api.dto.AbstractSObjectBase instances within the tree get updated with the identifier values (Id property) or their corresponding org.apache.camel.component.salesforce.api.dto.composite.SObjectNode is populated with errors on failure.

Note that for some records operation can succeed and for some it can fail — so you need to manually check for errors.

The easiest way to use this functionality is to use the DTOs generated by the camel-salesforce-maven-plugin, but you also have the option of customizing the references that identify each object in the tree, for instance primary keys from your database.

Let’s look at an example:

Account account = ...
Contact president = ...
Contact marketing = ...

Account anotherAccount = ...
Contact sales = ...
Asset someAsset = ...

// build the tree
SObjectTree request = new SObjectTree();
request.addObject(account).addChildren(president, marketing);
request.addObject(anotherAccount).addChild(sales).addChild(someAsset);

final SObjectTree response = template.requestBody("salesforce:composite-tree", tree, SObjectTree.class);
final Map<Boolean, List<SObjectNode>> result = response.allNodes()
                                                   .collect(Collectors.groupingBy(SObjectNode::hasErrors));

final List<SObjectNode> withErrors = result.get(true);
final List<SObjectNode> succeeded = result.get(false);

final String firstId = succeeded.get(0).getId();
Composite Batch

composite-batch

Submit a composition of requests in batch. Executes up to 25 sub-requests in a single request.

Parameter Type Description Default Required

Body

SObjectBatch

Contains sub-requests to be executed.

x

Output

Type: SObjectBatchResponse

The Composite API batch operation allows you to accumulate multiple requests in a batch and then submit them in one go, saving the round trip cost of multiple individual requests. Each response is then received in a list of responses with the order preserved, so that the n-th requests response is in the n-th place of the response.

The results can vary from API to API so the result of each sub-request (SObjectBatchResult.result) is given as a java.lang.Object. In most cases the result will be a java.util.Map with string keys and values or other java.util.Map as value. Requests are made in JSON format and hold some type information (i.e., it is known what values are strings and what values are numbers).

Let’s look at an example:

final String acountId = ...
final SObjectBatch batch = new SObjectBatch("53.0");

final Account updates = new Account();
updates.setName("NewName");
batch.addUpdate("Account", accountId, updates);

final Account newAccount = new Account();
newAccount.setName("Account created from Composite batch API");
batch.addCreate(newAccount);

batch.addGet("Account", accountId, "Name", "BillingPostalCode");

batch.addDelete("Account", accountId);

final SObjectBatchResponse response = template.requestBody("salesforce:composite-batch", batch, SObjectBatchResponse.class);

boolean hasErrors = response.hasErrors(); // if any of the requests has resulted in either 4xx or 5xx HTTP status
final List<SObjectBatchResult> results = response.getResults(); // results of three operations sent in batch

final SObjectBatchResult updateResult = results.get(0); // update result
final int updateStatus = updateResult.getStatusCode(); // probably 204
final Object updateResultData = updateResult.getResult(); // probably null

final SObjectBatchResult createResult = results.get(1); // create result
@SuppressWarnings("unchecked")
final Map<String, Object> createData = (Map<String, Object>) createResult.getResult();
final String newAccountId = createData.get("id"); // id of the new account, this is for JSON, for XML it would be createData.get("Result").get("id")

final SObjectBatchResult retrieveResult = results.get(2); // retrieve result
@SuppressWarnings("unchecked")
final Map<String, Object> retrieveData = (Map<String, Object>) retrieveResult.getResult();
final String accountName = retrieveData.get("Name"); // Name of the retrieved account, this is for JSON, for XML it would be createData.get("Account").get("Name")
final String accountBillingPostalCode = retrieveData.get("BillingPostalCode"); // Name of the retrieved account, this is for JSON, for XML it would be createData.get("Account").get("BillingPostalCode")

final SObjectBatchResult deleteResult = results.get(3); // delete result
final int updateStatus = deleteResult.getStatusCode(); // probably 204
final Object updateResultData = deleteResult.getResult(); // probably null
Retrieve Multiple Records with Fewer Round-Trips

compositeRetrieveSObjectCollections

Retrieve one or more records of the same object type.

Parameter Type Description Default Required

sObjectIds

List of String or comma-separated string

A list of one or more IDs of the objects to return. All IDs must belong to the same object type.

x

sObjectFields

List of String or comma-separated string

A list of fields to include in the response. The field names you specify must be valid, and you must have read-level permissions to each field.

x

sObjectName

String

Type of SObject, e.g. Account

x

sObjectClass

String

Fully qualified class name of DTO class to use for deserializing the response.

Required if sObjectName parameter does not resolve to a class that exists in the package specified by the package option.

Output

Type: List of class determined by sObjectName or sObjectClass header

Create SObject Collections

compositeCreateSObjectCollections

Add up to 200 records. Mixed SObject types is supported.

Parameter Type Description Default Required

Body

List of SObject

A list of SObjects to create

x

allOrNone

boolean

Indicates whether to roll back the entire request when the creation of any object fails (true) or to continue with the independent creation of other objects in the request.

false

Output

Type: List<SaveSObjectResult>

Update SObject Collections

compositeUpdateSObjectCollections

Update up to 200 records. Mixed SObject types is supported.

Parameter Type Description Default Required

Body

List of SObject

A list of SObjects to update

x

allOrNone

boolean

Indicates whether to roll back the entire request when the update of any object fails (true) or to continue with the independent update of other objects in the request.

false

Output

Type: List<SaveSObjectResult>

Upsert SObject Collections

compositeUpsertSObjectCollections

Create or update (upsert) up to 200 records based on an external ID field. Mixed SObject types is not supported.

Parameter Type Description Default Required

Body

List of SObject

A list of SObjects to upsert

x

allOrNone

boolean

Indicates whether to roll back the entire request when the upsert of any object fails (true) or to continue with the independent upsert of other objects in the request.

false

sObjectName

String

Type of SObject, e.g. Account

x

sObjectIdName

String

Name of External ID field

x

Output

Type: List<UpsertSObjectResult>

Delete SObject Collections

compositeDeleteSObjectCollections

Delete up to 200 records. Mixed SObject types is supported.

Parameter Type Description Default Required

sObjectIds or request body

List of String or comma-separated string

A list of up to 200 IDs of objects to be deleted.

x

allOrNone

boolean

Indicates whether to roll back the entire request when the deletion of any object fails (true) or to continue with the independent deletion of other objects in the request.

false

Output

Type: List<DeleteSObjectResult>

Get Event Schema

getEventSchema

Gets the definition of a Platform Event in JSON format. Other types of events such as Change Data Capture events or custom events are also supported. This operation is available in REST API version 40.0 and later.

Parameter Type Description Default Required

eventName

String

Name of event

eventName or eventSchemaId is required

eventSchemaId

String

ID of a schema

eventName or eventSchemaId is required

eventSchemaFormat

EventSchemaFormatEnum

EXPANDED: Apache Avro format but doesn’t strictly adhere to the record complex type. COMPACT: Apache Avro, adheres to the specification for the record complex type. This parameter is available in API version 43.0 and later.

EXPANDED

Output

Type: InputStream

Apex REST API

Invoke an Apex REST Web Service method

apexCall

You can expose your Apex class and methods so that external applications can access your code and your application through the REST architecture.

The URI format for invoking Apex REST is:

salesforce:apexCall[/yourApexRestUrl][?options]

You can supply the apexUrl either in the endpoint (see above), or as the apexUrl option as listed in the table below. In either case the Apex URL can contain placeholders in the format of {headerName}. E.g., for the Apex URL MyApexClass/{id}, the value of the header named id will be used to replace the placeholder. If rawPayload is false and neither sObjectClass nor sObjectName are set, Camel will attempt to determine the correct AbstractQueryRecordsBase sublcass based on the response.

Parameter Type Description Default Required

Body

Map<String, Object> if GET, otherwise String or InputStream

In the case of a GET, the body (Map instance) is transformed into query parameters. For other HTTP methods, the body is used for the HTTP body.

apexUrl

String

The portion of the endpoint URL after https://instance.salesforce.com/services/apexrest/, e.g., 'MyApexClass/'

Yes, unless supplied in endpoint

apexMethod

String

The HTTP method (e.g. GET, POST) to use.

GET

rawPayload

Boolean

If true, Camel will not serialize the request or response bodies.

false

Header: apexQueryParam.[paramName]

Object

Headers that override apex parameters passed in the endpoint.

sObjectName

String

Name of sObject (e.g. Merchandise__c) used to deserialize the response

sObjectClass

String

Fully qualified class name used to deserialize the response

Output

Type: Instance of class supplied in sObjectClass input header.

Bulk 2.0 API

The Bulk 2.0 API has a simplified model over the original Bulk API. Use it to quickly load a large amount of data into salesforce, or query a large amount of data out of salesforce. Data must be provided in CSV format, usually via an InputStream instance. PK chunking is performed automatically. The minimum API version for Bulk 2.0 is v41.0. The minimum API version for Bulk Queries is v47.0. DTO classes mentioned below are from the org.apache.camel.component.salesforce.api.dto.bulkv2 package. The following operations are supported:

Create a Job

bulk2CreateJob Creates a bulk ingest job.

Parameter Type Description Default Required

Body

Job

Job to create

x

Output

Type: Job

Upload a Batch of Job Data

bulk2CreateBatch

Adds a batch of data to an ingest job.

Parameter Type Description Default Required

Body

InputStream or String

CSV data. The first row must contain headers.

Required if jobId not supplied

jobId

String

Id of Job to create batch under

x
Close a Job

bulk2CloseJob

Closes an ingest job. You must close the job in order for it to be processed or aborted/deleted.

Parameter Type Description Default Required

jobId

String

Id of Job to close

x

Output

Type: Job

Abort a Job

bulk2AbortJob

Aborts an ingest job.

Parameter Type Description Default Required

jobId

String

Id of Job to abort

x

Output

Type: Job

Delete a Job

bulk2DeleteJob

Deletes an ingest job.

Parameter Type Description Default Required

jobId

String

Id of Job to delete

x
Get Job Successful Record Results

bulk2GetSuccessfulResults

Gets successful results for an ingest job.

Parameter Type Description Default Required

jobId

String

Id of Job to get results for

x

Output

Type: InputStream
Contents: CSV data

Get Job Failed Record Results

bulk2GetFailedResults

Gets failed results for an ingest job.

Parameter Type Description Default Required

jobId

String

Id of Job to get results for

x

Output

Type: InputStream
Contents: CSV data

Get Job Unprocessed Record Results

bulk2GetUnprocessedRecords

Gets unprocessed records for an ingest job.

Parameter Type Description Default Required

jobId

String

Id of Job to get records for

x

Output

Type: InputStream Contents: CSV data

Get Job Info

bulk2GetJob

Gets an ingest Job.

Parameter Type Description Default Required

Body

Job

Will use Id of supplied Job to retrieve Job

Required if jobId not supplied

jobId

String

Id of Job to retrieve

Required if Job not supplied in body

Output

Type: Job

Get All Jobs

bulk2GetAllJobs

Gets all ingest jobs.

Parameter Type Description Default Required

queryLocator

String

Used in subsequent calls if results span multiple pages

Output

Type: Jobs

If the done property of the Jobs instance is false, there are additional pages to fetch, and the nextRecordsUrl property contains the value to be set in the queryLocator parameter on subsequent calls.

Create a Query Job

bulk2CreateQueryJob

Gets a query job.

Parameter Type Description Default Required

Body

QueryJob

QueryJob to create

x

Output

Type: QueryJob

Get Results for a Query Job

bulk2GetQueryJobResults

Get bulk query job results. jobId parameter is required. Accepts maxRecords and locator parameters.

Parameter Type Description Default Required

jobId

String

Id of Job to get results for

x

maxRecords

Integer

The maximum number of records to retrieve per set of results for the query. The request is still subject to the size limits. If you are working with a very large number of query results, you may experience a timeout before receiving all the data from Salesforce. To prevent a timeout, specify the maximum number of records your client is expecting to receive in the maxRecords parameter. This splits the results into smaller sets with this value as the maximum size.

locator

locator

A string that identifies a specific set of query results. Providing a value for this parameter returns only that set of results. Omitting this parameter returns the first set of results.

Output

Type: InputStream Contents: CSV data

Response message headers include Sforce-NumberOfRecords and Sforce-Locator headers. The value of Sforce-Locator can be passed into subsequent calls via the locator parameter.

Abort a Query Job

bulk2AbortQueryJob

Aborts a query job.

Parameter Type Description Default Required

jobId

String

Id of Job to abort

x

Output

Type: QueryJob

Delete a Query Job

bulk2DeleteQueryJob

Deletes a query job.

Parameter Type Description Default Required

jobId

String

Id of Job to delete

x
Get Information About a Query Job

bulk2GetQueryJob

Gets a query job.

Parameter Type Description Default Required

jobId

String

Id of Job to retrieve

x

Output

Type: QueryJob

Get Information About All Query Jobs

bulk2GetAllQueryJobs

Gets all query jobs.

Parameter Type Description Default Required

queryLocator

String

Used in subsequent calls if results span multiple pages

Output

Type: QueryJobs

If the done property of the QueryJobs instance is false, there are additional pages to fetch, and the nextRecordsUrl property contains the value to be set in the queryLocator parameter on subsequent calls.

Bulk (original) API

Producer endpoints can use the following APIs. All Job data formats, i.e. xml, csv, zip/xml, and zip/csv are supported.
The request and response have to be marshalled/unmarshalled by the route. Usually the request will be some stream source like a CSV file, and the response may also be saved to a file to be correlated with the request.

The following operations are supported:

Create a Job

createJob

Creates a Salesforce Bulk Job. PK Chunking is supported via the pkChunking* options. See an explanation here.

Parameter Type Description Default Required

Body

JobInfo

Job to create

x

pkChunking

Boolean

Whether to use PK Chunking

false

pkChunkingChunkSize

Integer

pkChunkingStartRow

Integer

pkChunkingParent

String

Output

Type: JobInfo

Get Job Details

getJob

Gets a Job

Parameter Type Description Default Required

jobId

String

Id of Job to get

Required if body not supplied

Body

JobInfo

JobInfo instance from which Id will be used

Required if jobId not supplied

Output

Type: JobInfo

Close a Job

closeJob

Closes a Job

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

Body

JobInfo

JobInfo instance from which Id will be used

Required if jobId not supplied

Output

Type: JobInfo

Abort a Job

abortJob

Aborts a Job

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

Body

JobInfo

JobInfo instance from which Id will be used

Required if jobId not supplied

Output

Type: JobInfo

Add a Batch to a Job

createBatch

Submits a Batch within a Bulk Job

Parameter Type Description Default Required

jobId

String

Id of Job

x

contentType

String

Content type of body. Can be XML, CSV, ZIP_XML or ZIP_CSV

x

Body

InputStream or String

Batch data

x

Output

Type: BatchInfo

Get Information for a Batch

getBatch

Get a Batch

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

batchId

String

Id of Batch

Required if body not supplied

Body

BatchInfo

JobInfo instance from which jobId and batchId will be used

Required if jobId and BatchId not supplied

Output

Type: BatchInfo

Get Information for All Batches in a Job

getAllBatches

Gets all Batches for a Bulk Job Id

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

Body

JobInfo

JobInfo instance from which Id will be used

Required if jobId not supplied

Output

Type: List<JobInfo>

Get a Batch Request

getRequest

Gets Request data (XML/CSV) for a Batch

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

batchId

String

Id of Batch

Required if body not supplied

Body

BatchInfo

JobInfo instance from which jobId and batchId will be used

Required if jobId and BatchId not supplied

Output

Type: InputStream

Get Batch Results

getResults

Gets the results of the Batch when it’s complete

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

batchId

String

Id of Batch

Required if body not supplied

Body

BatchInfo

JobInfo instance from which jobId and batchId will be used

Required if jobId and BatchId not supplied

Output

Type: InputStream

Create Bulk Query Batch

createBatchQuery

Creates a Batch from an SOQL query

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

contentType

String

Content type of body. Can be XML, CSV, ZIP_XML or ZIP_CSV

Required if JobInfo instance not supplied in body

sObjectQuery

String

SOQL query to be used for this batch

Required if not supplied in body

Body

JobInfo or String

Either JobInfo instance from which jobId and contentType will be used, or String to be used as the Batch query

Required JobInfo if jobId and contentType not supplied.

Output

Type: BatchInfo

Get Batch Results

getQueryResultIds

Gets a list of Result Ids for a Batch Query

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

batchId

String

Id of Batch

Required if body not supplied

Body

BatchInfo

JobInfo instance from which jobId and batchId will be used

Required if jobId and BatchId not supplied

Output

Type: List<String>

Get Bulk Query Results

getQueryResult

Gets results for a Result Id

Parameter Type Description Default Required

jobId

String

Id of Job

Required if body not supplied

batchId

String

Id of Batch

Required if body not supplied

resultId

String

Id of Result

If not passed in body

Body

BatchInfo or String

JobInfo instance from which jobId and batchId will be used. Otherwise, can be a String containing the resultId

BatchInfo Required if jobId and BatchId not supplied

Output

Type: InputStream

For example, the following producer endpoint uses the createBatch API to create a Job Batch. The in message must contain a body that can be converted into an InputStream (usually UTF-8 CSV or XML content from a file, etc.) and header fields 'jobId' for the Job and 'contentType' for the Job content type, which can be XML, CSV, ZIP_XML or ZIP_CSV. The put message body will contain BatchInfo on success, or throw a SalesforceException on error.

...to("salesforce:createBatch")..

Pub/Sub API

The Pub/Sub API allows you to publish and subscribe to platform events, including real-time event monitoring events, and change data capture events. This API is based on gRPC and HTTP/2, and event payloads are delivered in Apache Avro format.

Publishing Events

The URI format for publishing events is:

salesforce:pubSubPublish:<topic_name>

For example:

.to("salesforce:pubsubPublish:/event/MyCustomPlatformEvent__e")
Publish an Event

pubSubPublish

Parameter Type Description Default Required

Body

List. List can contained mixed types (see description below).

Event payloads to be published

Because The Pub/Sub API requires that event payloads be serialized in Apache Avro format, Camel will attempt to serialize event payloads from the following input types:

  • Avro GenericRecord. Camel fetches the Avro schema in order to serialize GenericRecord instances. This option doesn’t require ahead-of-time generation of Event classes.

  • Avro SpecificRecord. Subclasses of SpecificRecord contain properties that are specific to an event type. The maven plugin can generate the subclasses automatically.

  • POJO. Camel fetches the Avro schema in order to serialize POJO instances. The POJO’s field names must match event field names exactly, including case.

  • String. Camel will treat the String value as JSON and serialize to Avro. Note that the JSON value does not have to be Avro-encoded JSON. It can be arbitrary JSON, but it must be serializable to Avro based on the Schema associated with the topic you’re publishing to. The JSON object’s field names must match event field names exactly, including case.

  • byte[]. Camel will not perform any serialization. Value must be the Avro-encoded event payload.

  • com.salesforce.eventbus.protobuf.ProducerEvent. Providing a ProducerEvent allows full control, e.g., setting the id property, which can be tied back to the PublishResult.CorrelationKey.

Output

Type: List<org.apache.camel.component.salesforce.api.dto.pubsub.PublishResult>

The order of the items in the returned List correlates to the order of the items in the input List.

Subscribing

The URI format for subscribing to a Pub/Sub topic is:

salesforce:pubSubSubscribe:<topic_name>

For example:

from("salesforce:pubSubSubscribe:/event/BatchApexErrorEvent")
Parameter Type Description Default Required

replayPreset

ReplayPreset

Values: LATEST, EARLIEST, CUSTOM.

LATEST

pubSubReplayId

String

When replayPreset is set to CUSTOM, the replayId to use when subscribing to a topic.

pubSubBatchSize

int

Max number of events to receive at a time. Values >100 will be normalized to 100 by salesforce.

100

X

pubSubDeserializeType

PubSubDeserializeType

Values: AVRO, SPECIFIC_RECORD, GENERIC_RECORD, POJO, JSON. AVRO will try a SpecificRecord subclass if found, otherwise GenericRecord

AVRO

X

pubSubPojoClass

Fully qualified class name to deserialize Pub/Sub API event to.

If pubSubDeserializeType is POJO

Output

Type: Determined by the pubSubDeserializeType option.

Headers: CamelSalesforcePubSubReplayId

Streaming API

The Streaming API enables streaming of events using push technology and provides a subscription mechanism for receiving events in near real time. The Streaming API subscription mechanism supports multiple types of events, including PushTopic events, generic events, platform events, and Change Data Capture events.

Push Topics

The URI format for consuming Push Topics is:

salesforce:subscribe:<topic_name>[?options]

To create and subscribe to a topic

from("salesforce:subscribe:CamelTestTopic?notifyForFields=ALL&notifyForOperations=ALL&sObjectName=Merchandise__c&updateTopic=true&sObjectQuery=SELECT Id, Name FROM Merchandise__c")...

To subscribe to an existing topic

from("salesforce:subscribe:CamelTestTopic&sObjectName=Merchandise__c")...
Parameter Type Description Default Required

sObjectName

String

SObject to monitor

x

sObjectQuery

String

SOQL query used to create Push Topic

Required for creating new topics

updateTopic

Boolean

Whether to update an existing Push Topic if exists

false

notifyForFields

NotifyForFieldsEnum

Specifies how the record is evaluated against the PushTopic query.

Referenced

notifyForOperationCreate

Boolean

Whether a create operation should generate a notification.

false

notifyForOperationDelete

Boolean

Whether a delete operation should generate a notification.

false

notifyForOperationUndelete

Boolean

Whether an undelete operation should generate a notification.

false

notifyForOperationUpdate

Boolean

Whether an update operation should generate a notification.

false

notifyForOperations

NotifyForOperationsEnum

Whether an update operation should generate a notification. Only for use in API version < 29.0

All

replayId

int

The replayId value to use when subscribing.

defaultReplayId

int

Default replayId setting if no value is found in initialReplayIdMap.

-1

fallBackReplayId

int

ReplayId to fall back to after an Invalid Replay Id response.

-1

Output

Type: Class passed via sObjectName parameter

Platform Events

To emit a platform event use the createSObject operation, passing an instance of a platform event, e.g. Order_Event__e.

The URI format for consuming platform events is:

salesforce:subscribe:event/<event_name>

For example, to receive platform events use for the event type Order_Event__e:

from("salesforce:subscribe:event/Order_Event__e")
Parameter Type Description Default Required

rawPayload

Boolean

If false, operation returns a PlatformEvent, otherwise returns the raw Bayeux Message

false

replayId

int

The replayId value to use when subscribing.

defaultReplayId

int

Default replayId setting if no value is found in initialReplayIdMap.

-1

fallBackReplayId

int

ReplayId to fall back to after an Invalid Replay Id response.

-1

Output

Type: PlatformEvent or org.cometd.bayeux.Message

Change Data Capture Events

Change Data Capture (CDC) allows you to receive near-real-time changes of Salesforce records, and synchronize corresponding records in an external data store. Change Data Capture publishes change events, which represent changes to Salesforce records. Changes include the creation of a new record, updates to an existing record, deletion of a record, and undeletion of a record.

The URI format to consume CDC events is as follows:

All Selected Entities

salesforce:subscribe:data/ChangeEvents

Standard Objects

salesforce:subscribe:data/<Standard_Object_Name>ChangeEvent

Custom Objects

salesforce:subscribe:data/<Custom_Object_Name>__ChangeEvent

Here are a few examples

from("salesforce:subscribe:data/ChangeEvents?replayId=-1").log("being notified of all change events")
from("salesforce:subscribe:data/AccountChangeEvent?replayId=-1").log("being notified of change events for Account records")
from("salesforce:subscribe:data/Employee__ChangeEvent?replayId=-1").log("being notified of change events for Employee__c custom object")

More details about how to use the Camel Salesforce component change data capture capabilities could be found in the ChangeEventsConsumerIntegrationTest.

The Salesforce developer guide is a good fit to better know the subtleties of implementing a change data capture integration application. The dynamic nature of change event body fields, high level replication steps as well as security considerations could be of interest.

Parameter Type Description Default Required

rawPayload

Boolean

If false, operation returns a Map<String, Object>, otherwise returns the raw Bayeux Message

false

replayId

int

The replayId value to use when subscribing.

defaultReplayId

int

Default replayId setting if no value is found in initialReplayIdMap.

-1

fallBackReplayId

int

ReplayId to fall back to after an Invalid Replay Id response.

-1

Output

Type: Map<String, Object> or org.cometd.bayeux.Message

Headers

Name Description

CamelSalesforceChangeType

CREATE, UPDATE, DELETE or UNDELETE

Reports API

Report List

getRecentReports

Gets up to 200 of the reports you most recently viewed.

Output

Type: List<RecentReport>

Describe Report

getReportDescription

Retrieves the report, report type, and related metadata for a report, either in a tabular or summary or matrix format.

Parameter Type Description Default Required

reportId

String

Id of Report

Required if not supplied in body

Body

String

Id of Report

Required if not supplied in reportId parameter

Output

Type: ReportDescription

Execute Sync

executeSyncReport

Runs a report synchronously with or without changing filters and returns the latest summary data.

Parameter Type Description Default Required

reportId

String

Id of Report

Required if not supplied in body

includeDetails

Boolean

Whether to include details

false

reportMetadata

ReportMetadata

Optionally, pass ReportMetadata here instead of body

Body

ReportMetadata

If supplied, will use instead of reportId

Required if not supplied in reportId parameter

Output

Type: AbstractReportResultsBase

Execute Async

executeAsyncReport

Runs an instance of a report asynchronously with or without filters and returns the summary data with or without details.

Parameter Type Description Default Required

reportId

String

Id of Report

Required if not supplied in body

includeDetails

Boolean

Whether to include details

false

reportMetadata

ReportMetadata

Optionally, pass ReportMetadata here instead of body

Body

ReportMetadata

If supplied, will use instead of reportId parameter

Required if not supplied in reportId parameter

Output

Type: ReportInstance

Instances List

getReportInstances

Returns a list of instances for a report that you requested to be run asynchronously. Each item in the list is treated as a separate instance of the report.

Parameter Type Description Default Required

reportId

String

Id of Report

Required if not supplied in body

Body

String

If supplied, will use instead of reportId parameter

Required if not supplied in reportId parameter

Output

Type: List<ReportInstance>

Instance Results

getReportResults

Contains the results of running a report.

Parameter Type Description Default Required

reportId

String

Id of Report

Required if not supplied in body

instanceId

String

Id of Report instance

x

Body

String

If supplied, will use instead of reportId parameter

Required if not supplied in reportId parameter

Output

Type: AbstractReportResultsBase

Miscellaneous Operations

  • raw - Send requests to salesforce and have full, raw control over endpoint, parameters, body, etc.

Raw

raw

Sends HTTP requests to salesforce with full, raw control of all aspects of the call. Any serialization or deserialization of request and response bodies must be performed in the route. The Content-Type HTTP header will be automatically set based on the format option, but this can be overridden with the rawHttpHeaders option.

Parameter Type Description Default Required

Body

String or InputStream

Body of the HTTP request

rawPath

String

The portion of the endpoint URL after the domain name, e.g., '/services/data/v51.0/sobjects/Account/'

x

rawMethod

String

The HTTP method

x

rawQueryParameters

String

Comma separated list of message headers to include as query parameters. Do not url-encode values as this will be done automatically.

rawHttpHeaders

String

Comma separated list of message headers to include as HTTP headers

Output

Type: InputStream

Query example

In this example we’ll send a query to the REST API. The query must be passed in a URL parameter called "q", so we’ll create a message header called q and tell the raw operation to include that message header as a URL parameter:

from("direct:queryExample")
  .setHeader("q", "SELECT Id, LastName FROM Contact")
  .to("salesforce:raw?format=JSON&rawMethod=GET&rawQueryParameters=q&rawPath=/services/data/v51.0/query")
  // deserialize JSON results or handle in some other way
SObject example

In this example, we’ll pass a Contact the REST API in a create operation. Since the raw operation does not perform any serialization, we make sure to pass XML in the message body

from("direct:createAContact")
  .setBody(constant("<Contact><LastName>TestLast</LastName></Contact>"))
  .to("salesforce:raw?format=XML&rawMethod=POST&rawPath=/services/data/v51.0/sobjects/Contact")

The response is:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Result>
    <id>0034x00000RnV6zAAF</id>
    <success>true</success>
</Result>

Uploading a document to a ContentWorkspace

Create the ContentVersion in Java, using a Processor instance:

public class ContentProcessor implements Processor {
    public void process(Exchange exchange) throws Exception {
        Message message = exchange.getIn();

        ContentVersion cv = new ContentVersion();
        ContentWorkspace cw = getWorkspace(exchange);
        cv.setFirstPublishLocationId(cw.getId());
        cv.setTitle("test document");
        cv.setPathOnClient("test_doc.html");
        byte[] document = message.getBody(byte[].class);
        ObjectMapper mapper = new ObjectMapper();
        String enc = mapper.convertValue(document, String.class);
        cv.setVersionDataUrl(enc);
        message.setBody(cv);
    }

    protected ContentWorkspace getWorkSpace(Exchange exchange) {
        // Look up the content workspace somehow, maybe use enrich() to add it to a
        // header that can be extracted here
        ....
    }
}

Give the output from the processor to the Salesforce component:

from("file:///home/camel/library")
    .to(new ContentProcessor())     // convert bytes from the file into a ContentVersion SObject
                                    // for the salesforce component
    .to("salesforce:createSObject");

Generating SOQL query strings

org.apache.camel.component.salesforce.api.utils.QueryHelper contains helper methods to generate SOQL queries. For instance, to fetch all custom fields from Account SObject, you can generate the SOQL SELECT by invoking:

String allCustomFieldsQuery = QueryHelper.queryToFetchFilteredFieldsOf(new Account(), SObjectField::isCustom);

Camel Salesforce Maven Plugin

The Maven plugin generates Java DTOs to represent salesforce objects.

Please refer to README.md for details on how to use the plugin.

Spring Boot Auto-Configuration

When using salesforce with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-salesforce-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 103 options, which are listed below.

Name Description Default Type

camel.component.salesforce.all-or-none

Composite API option to indicate to rollback all records if any are not successful.

false

Boolean

camel.component.salesforce.apex-method

APEX method name.

String

camel.component.salesforce.apex-query-params

Query params for APEX method.

Map

camel.component.salesforce.apex-url

APEX method URL.

String

camel.component.salesforce.api-version

Salesforce API version.

56.0

String

camel.component.salesforce.authentication-type

Explicit authentication method to be used, one of USERNAME_PASSWORD, REFRESH_TOKEN, CLIENT_CREDENTIALS, or JWT. Salesforce component can auto-determine the authentication method to use from the properties set, set this property to eliminate any ambiguity.

AuthenticationType

camel.component.salesforce.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.salesforce.backoff-increment

Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type.

1000

Long

camel.component.salesforce.batch-id

Bulk API Batch ID.

String

camel.component.salesforce.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.salesforce.client-id

OAuth Consumer Key of the connected app configured in the Salesforce instance setup. Typically a connected app needs to be configured but one can be provided by installing a package.

String

camel.component.salesforce.client-secret

OAuth Consumer Secret of the connected app configured in the Salesforce instance setup.

String

camel.component.salesforce.composite-method

Composite (raw) method.

String

camel.component.salesforce.config

Global endpoint configuration - use to set values that are common to all endpoints. The option is a org.apache.camel.component.salesforce.SalesforceEndpointConfig type.

SalesforceEndpointConfig

camel.component.salesforce.content-type

Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV.

ContentType

camel.component.salesforce.default-replay-id

Default replayId setting if no value is found in initialReplayIdMap.

-1

Long

camel.component.salesforce.enabled

Whether to enable auto configuration of the salesforce component. This is enabled by default.

Boolean

camel.component.salesforce.event-name

Name of Platform Event, Change Data Capture Event, custom event, etc.

String

camel.component.salesforce.event-schema-format

EXPANDED: Apache Avro format but doesn’t strictly adhere to the record complex type. COMPACT: Apache Avro, adheres to the specification for the record complex type. This parameter is available in API version 43.0 and later.

EventSchemaFormatEnum

camel.component.salesforce.event-schema-id

The ID of the event schema.

String

camel.component.salesforce.fall-back-replay-id

ReplayId to fall back to after an Invalid Replay Id response.

-1

Long

camel.component.salesforce.format

Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON. As of Camel 3.12, this option only applies to the Raw operation.

PayloadFormat

camel.component.salesforce.http-client

Custom Jetty Http Client to use to connect to Salesforce. The option is a org.apache.camel.component.salesforce.SalesforceHttpClient type.

SalesforceHttpClient

camel.component.salesforce.http-client-connection-timeout

Connection timeout used by the HttpClient when connecting to the Salesforce server.

60000

Long

camel.component.salesforce.http-client-idle-timeout

Timeout used by the HttpClient when waiting for response from the Salesforce server.

10000

Long

camel.component.salesforce.http-client-properties

Used to set any properties that can be configured on the underlying HTTP client. Have a look at properties of SalesforceHttpClient and the Jetty HttpClient for all available options.

Map

camel.component.salesforce.http-max-content-length

Max content length of an HTTP response.

Integer

camel.component.salesforce.http-proxy-auth-uri

Used in authentication against the HTTP proxy server, needs to match the URI of the proxy server in order for the httpProxyUsername and httpProxyPassword to be used for authentication.

String

camel.component.salesforce.http-proxy-excluded-addresses

A list of addresses for which HTTP proxy server should not be used.

Set

camel.component.salesforce.http-proxy-host

Hostname of the HTTP proxy server to use.

String

camel.component.salesforce.http-proxy-included-addresses

A list of addresses for which HTTP proxy server should be used.

Set

camel.component.salesforce.http-proxy-password

Password to use to authenticate against the HTTP proxy server.

String

camel.component.salesforce.http-proxy-port

Port number of the HTTP proxy server to use.

Integer

camel.component.salesforce.http-proxy-realm

Realm of the proxy server, used in preemptive Basic/Digest authentication methods against the HTTP proxy server.

String

camel.component.salesforce.http-proxy-secure

If set to false disables the use of TLS when accessing the HTTP proxy.

true

Boolean

camel.component.salesforce.http-proxy-socks4

If set to true the configures the HTTP proxy to use as a SOCKS4 proxy.

false

Boolean

camel.component.salesforce.http-proxy-use-digest-auth

If set to true Digest authentication will be used when authenticating to the HTTP proxy, otherwise Basic authorization method will be used.

false

Boolean

camel.component.salesforce.http-proxy-username

Username to use to authenticate against the HTTP proxy server.

String

camel.component.salesforce.http-request-buffer-size

HTTP request buffer size. May need to be increased for large SOQL queries.

8192

Integer

camel.component.salesforce.http-request-timeout

Timeout value for HTTP requests.

60000

Long

camel.component.salesforce.include-details

Include details in Salesforce1 Analytics report, defaults to false.

Boolean

camel.component.salesforce.initial-replay-id-map

Replay IDs to start from per channel name.

Map

camel.component.salesforce.instance-id

Salesforce1 Analytics report execution instance ID.

String

camel.component.salesforce.instance-url

URL of the Salesforce instance used after authentication, by default received from Salesforce on successful authentication.

String

camel.component.salesforce.job-id

Bulk API Job ID.

String

camel.component.salesforce.jwt-audience

Value to use for the Audience claim (aud) when using OAuth JWT flow. If not set, the login URL will be used, which is appropriate in most cases.

String

camel.component.salesforce.keystore

KeyStore parameters to use in OAuth JWT flow. The KeyStore should contain only one entry with private key and certificate. Salesforce does not verify the certificate chain, so this can easily be a selfsigned certificate. Make sure that you upload the certificate to the corresponding connected app. The option is a org.apache.camel.support.jsse.KeyStoreParameters type.

KeyStoreParameters

camel.component.salesforce.lazy-login

If set to true prevents the component from authenticating to Salesforce with the start of the component. You would generally set this to the (default) false and authenticate early and be immediately aware of any authentication issues. Lazy login is not supported by salesforce consumers.

false

Boolean

camel.component.salesforce.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.salesforce.limit

Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.

Integer

camel.component.salesforce.locator

Locator provided by salesforce Bulk 2.0 API for use in getting results for a Query job.

String

camel.component.salesforce.login-config

All authentication configuration in one nested bean, all properties set there can be set directly on the component as well. The option is a org.apache.camel.component.salesforce.SalesforceLoginConfig type.

SalesforceLoginConfig

camel.component.salesforce.login-url

URL of the Salesforce instance used for authentication, by default set to https://login.salesforce.com.

https://login.salesforce.com

String

camel.component.salesforce.long-polling-transport-properties

Used to set any properties that can be configured on the LongPollingTransport used by the BayeuxClient (CometD) used by the streaming api.

Map

camel.component.salesforce.max-backoff

Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type.

30000

Long

camel.component.salesforce.max-records

The maximum number of records to retrieve per set of results for a Bulk 2.0 Query. The request is still subject to the size limits. If you are working with a very large number of query results, you may experience a timeout before receiving all the data from Salesforce. To prevent a timeout, specify the maximum number of records your client is expecting to receive in the maxRecords parameter. This splits the results into smaller sets with this value as the maximum size.

Integer

camel.component.salesforce.not-found-behaviour

Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default.

NotFoundBehaviour

camel.component.salesforce.notify-for-fields

Notify for fields, options are ALL, REFERENCED, SELECT, WHERE.

NotifyForFieldsEnum

camel.component.salesforce.notify-for-operation-create

Notify for create operation, defaults to false (API version >= 29.0).

Boolean

camel.component.salesforce.notify-for-operation-delete

Notify for delete operation, defaults to false (API version >= 29.0).

Boolean

camel.component.salesforce.notify-for-operation-undelete

Notify for un-delete operation, defaults to false (API version >= 29.0).

Boolean

camel.component.salesforce.notify-for-operation-update

Notify for update operation, defaults to false (API version >= 29.0).

Boolean

camel.component.salesforce.notify-for-operations

Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version < 29.0).

NotifyForOperationsEnum

camel.component.salesforce.object-mapper

Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects. The option is a com.fasterxml.jackson.databind.ObjectMapper type.

ObjectMapper

camel.component.salesforce.packages

In what packages are the generated DTO classes. Typically the classes would be generated using camel-salesforce-maven-plugin. Set it if using the generated DTOs to gain the benefit of using short SObject names in parameters/header values. Multiple packages can be separated by comma.

String

camel.component.salesforce.password

Password used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows. Make sure that you append security token to the end of the password if using one.

String

camel.component.salesforce.pk-chunking

Use PK Chunking. Only for use in original Bulk API. Bulk 2.0 API performs PK chunking automatically, if necessary.

Boolean

camel.component.salesforce.pk-chunking-chunk-size

Chunk size for use with PK Chunking. If unspecified, salesforce default is 100,000. Maximum size is 250,000.

Integer

camel.component.salesforce.pk-chunking-parent

Specifies the parent object when you’re enabling PK chunking for queries on sharing objects. The chunks are based on the parent object’s records rather than the sharing object’s records. For example, when querying on AccountShare, specify Account as the parent object. PK chunking is supported for sharing objects as long as the parent object is supported.

String

camel.component.salesforce.pk-chunking-start-row

Specifies the 15-character or 18-character record ID to be used as the lower boundary for the first chunk. Use this parameter to specify a starting ID when restarting a job that failed between batches.

String

camel.component.salesforce.pub-sub-batch-size

Max number of events to receive in a batch from the Pub/Sub API.

100

Integer

camel.component.salesforce.pub-sub-deserialize-type

How to deserialize events consume from the Pub/Sub API. AVRO will try a SpecificRecord subclass if found, otherwise GenericRecord.

PubSubDeserializeType

camel.component.salesforce.pub-sub-host

Pub/Sub host.

api.pubsub.salesforce.com

String

camel.component.salesforce.pub-sub-pojo-class

Fully qualified class name to deserialize Pub/Sub API event to.

String

camel.component.salesforce.pub-sub-port

Pub/Sub port.

7443

Integer

camel.component.salesforce.pubsub-allow-use-system-proxy

Allow the Pub/Sub API client to use the proxy detected by java.net.ProxySelector. If false then no proxy server will be used.

true

Boolean

camel.component.salesforce.query-locator

Query Locator provided by salesforce for use when a query results in more records than can be retrieved in a single call. Use this value in a subsequent call to retrieve additional records.

String

camel.component.salesforce.raw-http-headers

Comma separated list of message headers to include as HTTP parameters for Raw operation.

String

camel.component.salesforce.raw-method

HTTP method to use for the Raw operation.

String

camel.component.salesforce.raw-path

The portion of the endpoint URL after the domain name. E.g., '/services/data/v52.0/sobjects/Account/'.

String

camel.component.salesforce.raw-payload

Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default.

false

Boolean

camel.component.salesforce.raw-query-parameters

Comma separated list of message headers to include as query parameters for Raw operation. Do not url-encode values as this will be done automatically.

String

camel.component.salesforce.refresh-token

Refresh token already obtained in the refresh token OAuth flow. One needs to setup a web application and configure a callback URL to receive the refresh token, or configure using the builtin callback at https://login.salesforce.com/services/oauth2/success or https://test.salesforce.com/services/oauth2/success and then retrive the refresh_token from the URL at the end of the flow. Note that in development organizations Salesforce allows hosting the callback web application at localhost.

String

camel.component.salesforce.replay-preset

Replay preset for Pub/Sub API.

ReplayPreset

camel.component.salesforce.report-id

Salesforce1 Analytics report Id.

String

camel.component.salesforce.report-metadata

Salesforce1 Analytics report metadata for filtering. The option is a org.apache.camel.component.salesforce.api.dto.analytics.reports.ReportMetadata type.

ReportMetadata

camel.component.salesforce.result-id

Bulk API Result ID.

String

camel.component.salesforce.s-object-blob-field-name

SObject blob field name.

String

camel.component.salesforce.s-object-class

Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin.

String

camel.component.salesforce.s-object-fields

SObject fields to retrieve.

String

camel.component.salesforce.s-object-id

SObject ID if required by API.

String

camel.component.salesforce.s-object-id-name

SObject external ID field name.

String

camel.component.salesforce.s-object-id-value

SObject external ID field value.

String

camel.component.salesforce.s-object-name

SObject name if required or supported by API.

String

camel.component.salesforce.s-object-query

Salesforce SOQL query string.

String

camel.component.salesforce.s-object-search

Salesforce SOSL search string.

String

camel.component.salesforce.ssl-context-parameters

SSL parameters to use, see SSLContextParameters class for all available options. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.salesforce.stream-query-result

If true, streams SOQL query result and transparently handles subsequent requests if there are multiple pages. Otherwise, results are returned one page at a time.

false

Boolean

camel.component.salesforce.update-topic

Whether to update an existing Push Topic when using the Streaming API, defaults to false.

false

Boolean

camel.component.salesforce.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.salesforce.user-name

Username used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows.

String

camel.component.salesforce.worker-pool-max-size

Maximum size of the thread pool used to handle HTTP responses.

20

Integer

camel.component.salesforce.worker-pool-size

Size of the thread pool used to handle HTTP responses.

10

Integer
Back to top