Spring JDBC

Since Camel 3.10

Only producer is supported

The Spring JDBC component is an extension of the JDBC component with one additional feature to integrate with Spring Transaction Manager.

For general use of this component then see the JDBC Component.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-spring-jdbc</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Spring JDBC component supports 4 options, which are listed below.

Name Description Default Type

dataSource (producer)

To use the DataSource instance instead of looking up the data source by name from the registry.

DataSource

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

boolean

connectionStrategy (advanced)

To use a custom strategy for working with connections. Do not use a custom strategy when using the spring-jdbc component because a special Spring ConnectionStrategy is used by default to support Spring Transactions.

ConnectionStrategy

Endpoint Options

The Spring JDBC endpoint is configured using URI syntax:

spring-jdbc:dataSourceName

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

dataSourceName (producer)

Required Name of DataSource to lookup in the Registry. If the name is dataSource or default, then Camel will attempt to lookup a default DataSource from the registry, meaning if there is a only one instance of DataSource found, then this DataSource will be used.

String

Query Parameters (14 parameters)

Name Description Default Type

allowNamedParameters (producer)

Whether to allow using named parameters in the queries.

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

outputClass (producer)

Specify the full package and class name to use as conversion when outputType=SelectOne or SelectList.

String

outputType (producer)

Determines the output the producer should use.

Enum values:

  • SelectOne

  • SelectList

  • StreamList

JdbcOutputType

parameters (producer)

Optional parameters to the java.sql.Statement. For example to set maxRows, fetchSize etc.

Map

readSize (producer)

The default maximum number of rows that can be read by a polling query. The default value is 0.

int

resetAutoCommit (producer)

Camel will set the autoCommit on the JDBC connection to be false, commit the change after executed the statement and reset the autoCommit flag of the connection at the end, if the resetAutoCommit is true. If the JDBC connection doesn’t support to reset the autoCommit flag, you can set the resetAutoCommit flag to be false, and Camel will not try to reset the autoCommit flag. When used with XA transactions you most likely need to set it to false so that the transaction manager is in charge of committing this tx.

boolean

transacted (producer)

Whether transactions are in use.

boolean

useGetBytesForBlob (producer)

To read BLOB columns as bytes instead of string data. This may be needed for certain databases such as Oracle where you must read BLOB columns as bytes.

boolean

useHeadersAsParameters (producer)

Set this option to true to use the prepareStatementStrategy with named parameters. This allows to define queries with named placeholders, and use headers with the dynamic values for the query placeholders.

boolean

useJDBC4ColumnNameAndLabelSemantics (producer)

Sets whether to use JDBC 4 or JDBC 3.0 or older semantic when retrieving column name. JDBC 4.0 uses columnLabel to get the column name where as JDBC 3.0 uses both columnName or columnLabel. Unfortunately JDBC drivers behave differently so you can use this option to work out issues around your JDBC driver if you get problem using this component This option is default true.

boolean

beanRowMapper (advanced)

To use a custom org.apache.camel.component.jdbc.BeanRowMapper when using outputClass. The default implementation will lower case the row names and skip underscores, and dashes. For example CUST_ID is mapped as custId.

BeanRowMapper

connectionStrategy (advanced)

To use a custom strategy for working with connections. Do not use a custom strategy when using the spring-jdbc component because a special Spring ConnectionStrategy is used by default to support Spring Transactions.

ConnectionStrategy

prepareStatementStrategy (advanced)

Allows the plugin to use a custom org.apache.camel.component.jdbc.JdbcPrepareStatementStrategy to control preparation of the query and prepared statement.

JdbcPrepareStatementStrategy

Spring Boot Auto-Configuration

When using spring-jdbc with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-spring-jdbc-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 4 options, which are listed below.

Name Description Default Type

camel.component.spring-jdbc.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.spring-jdbc.connection-strategy

To use a custom strategy for working with connections. Do not use a custom strategy when using the spring-jdbc component because a special Spring ConnectionStrategy is used by default to support Spring Transactions. The option is a org.apache.camel.component.jdbc.ConnectionStrategy type.

ConnectionStrategy

camel.component.spring-jdbc.enabled

Whether to enable auto configuration of the spring-jdbc component. This is enabled by default.

Boolean

camel.component.spring-jdbc.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean