Hazelcast Atomic Number

Since Camel 2.7

Only producer is supported

The Hazelcast atomic number component is one of Camel Hazelcast Components which allows you to access Hazelcast atomic number. An atomic number is an object that simply provides a grid wide number (long).

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Hazelcast Atomic Number component supports 4 options, which are listed below.

Name Description Default Type

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

boolean

hazelcastInstance (advanced)

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance.

HazelcastInstance

hazelcastMode (advanced)

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

String

Endpoint Options

The Hazelcast Atomic Number endpoint is configured using URI syntax:

hazelcast-atomicvalue:cacheName

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

cacheName (producer)

Required The name of the cache.

String

Query Parameters (4 parameters)

Name Description Default Type

defaultOperation (producer)

To specify a default operation to use, if no operation header has been provided.

Enum values:

  • put

  • delete

  • get

  • update

  • query

  • getAll

  • clear

  • putIfAbsent

  • allAll

  • removeAll

  • retainAll

  • evict

  • evictAll

  • valueCount

  • containsKey

  • containsValue

  • keySet

  • removevalue

  • increment

  • decrement

  • setvalue

  • destroy

  • compareAndSet

  • getAndAdd

  • add

  • offer

  • peek

  • poll

  • remainingCapacity

  • drainTo

  • removeIf

  • take

  • publish

  • readOnceHeal

  • readOnceTail

  • capacity

HazelcastOperation

hazelcastInstance (producer)

The hazelcast instance reference which can be used for hazelcast endpoint.

HazelcastInstance

hazelcastInstanceName (producer)

The hazelcast instance reference name which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance.

String

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

atomic number producer - to("hazelcast-atomicvalue:foo")

The operations for this producer are: * setvalue (set the number with a given value) * get * increase (+1) * decrease (-1) * destroy

Header Variables for the request message:

Name Type Description

CamelHazelcastOperationType

String

valid values are: setvalue, get, increase, decrease, destroy

Sample for set:

Java DSL:

from("direct:set")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.SET_VALUE))
.toF("hazelcast-%sfoo", HazelcastConstants.ATOMICNUMBER_PREFIX);

Spring DSL:

<route>
    <from uri="direct:set" />
    <setHeader name="hazelcast.operation.type">
        <constant>setvalue</constant>
    </setHeader>
    <to uri="hazelcast-atomicvalue:foo" />
</route>

Provide the value to set inside the message body (here the value is 10): template.sendBody("direct:set", 10);

Sample for get:

Java DSL:

from("direct:get")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.GET))
.toF("hazelcast-%sfoo", HazelcastConstants.ATOMICNUMBER_PREFIX);

Spring DSL:

<route>
    <from uri="direct:get" />
    <setHeader name="hazelcast.operation.type">
        <constant>get</constant>
    </setHeader>
    <to uri="hazelcast-atomicvalue:foo" />
</route>

You can get the number with long body = template.requestBody("direct:get", null, Long.class);.

Sample for increment:

Java DSL:

from("direct:increment")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.INCREMENT))
.toF("hazelcast-%sfoo", HazelcastConstants.ATOMICNUMBER_PREFIX);

Spring DSL:

<route>
    <from uri="direct:increment" />
    <setHeader name="hazelcast.operation.type">
        <constant>increment</constant>
    </setHeader>
    <to uri="hazelcast-atomicvalue:foo" />
</route>

The actual value (after increment) will be provided inside the message body.

Sample for decrement:

Java DSL:

from("direct:decrement")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.DECREMENT))
.toF("hazelcast-%sfoo", HazelcastConstants.ATOMICNUMBER_PREFIX);

Spring DSL:

<route>
    <from uri="direct:decrement" />
    <setHeader name="hazelcast.operation.type">
        <constant>decrement</constant>
    </setHeader>
    <to uri="hazelcast-atomicvalue:foo" />
</route>

The actual value (after decrement) will be provided inside the message body.

Sample for destroy

Java DSL:

from("direct:destroy")
.setHeader(HazelcastConstants.OPERATION, constant(HazelcastOperation.DESTROY))
.toF("hazelcast-%sfoo", HazelcastConstants.ATOMICNUMBER_PREFIX);

Spring DSL:

<route>
    <from uri="direct:destroy" />
    <setHeader name="hazelcast.operation.type">
        <constant>destroy</constant>
    </setHeader>
    <to uri="hazelcast-atomicvalue:foo" />
</route>

Spring Boot Auto-Configuration

When using hazelcast-atomicvalue with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-hazelcast-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 63 options, which are listed below.

Name Description Default Type

camel.component.hazelcast-atomicvalue.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-atomicvalue.enabled

Whether to enable auto configuration of the hazelcast-atomicvalue component. This is enabled by default.

Boolean

camel.component.hazelcast-atomicvalue.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-atomicvalue.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-atomicvalue.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-instance.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-instance.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-instance.enabled

Whether to enable auto configuration of the hazelcast-instance component. This is enabled by default.

Boolean

camel.component.hazelcast-instance.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-instance.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-list.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-list.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-list.enabled

Whether to enable auto configuration of the hazelcast-list component. This is enabled by default.

Boolean

camel.component.hazelcast-list.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-list.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-list.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-map.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-map.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-map.enabled

Whether to enable auto configuration of the hazelcast-map component. This is enabled by default.

Boolean

camel.component.hazelcast-map.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-map.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-map.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-multimap.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-multimap.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-multimap.enabled

Whether to enable auto configuration of the hazelcast-multimap component. This is enabled by default.

Boolean

camel.component.hazelcast-multimap.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-multimap.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-multimap.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-queue.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-queue.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-queue.enabled

Whether to enable auto configuration of the hazelcast-queue component. This is enabled by default.

Boolean

camel.component.hazelcast-queue.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-queue.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-queue.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-replicatedmap.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-replicatedmap.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-replicatedmap.enabled

Whether to enable auto configuration of the hazelcast-replicatedmap component. This is enabled by default.

Boolean

camel.component.hazelcast-replicatedmap.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-replicatedmap.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-replicatedmap.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-ringbuffer.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-ringbuffer.enabled

Whether to enable auto configuration of the hazelcast-ringbuffer component. This is enabled by default.

Boolean

camel.component.hazelcast-ringbuffer.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-ringbuffer.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-ringbuffer.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-seda.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-seda.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-seda.enabled

Whether to enable auto configuration of the hazelcast-seda component. This is enabled by default.

Boolean

camel.component.hazelcast-seda.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-seda.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-seda.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-set.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-set.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-set.enabled

Whether to enable auto configuration of the hazelcast-set component. This is enabled by default.

Boolean

camel.component.hazelcast-set.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-set.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-set.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hazelcast-topic.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hazelcast-topic.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hazelcast-topic.enabled

Whether to enable auto configuration of the hazelcast-topic component. This is enabled by default.

Boolean

camel.component.hazelcast-topic.hazelcast-instance

The hazelcast instance reference which can be used for hazelcast endpoint. If you don’t specify the instance reference, camel use the default hazelcast instance from the camel-hazelcast instance. The option is a com.hazelcast.core.HazelcastInstance type.

HazelcastInstance

camel.component.hazelcast-topic.hazelcast-mode

The hazelcast mode reference which kind of instance should be used. If you don’t specify the mode, then the node mode will be the default.

node

String

camel.component.hazelcast-topic.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean