Debezium SQL Server Connector

Since Camel 3.0

Only consumer is supported

The Debezium SQL Server component is wrapper around Debezium using Debezium Embedded, which enables Change Data Capture from SQL Server database using Debezium without the need for Kafka or Kafka Connect.

Note on handling failures: Per Debezium Embedded Engine documentation, the engines is actively recording source offsets and periodically flushes these offsets to a persistent storage, so when the application is restarted or crashed, the engine will resume from the last recorded offset. Thus, at normal operation, your downstream routes will receive each event exactly once, however in case of an application crash (not having a graceful shutdown), the application will resume from the last recorded offset, which may result in receiving duplicate events immediately after the restart. Therefore, your downstream routes should be tolerant enough of such case and deduplicate events if needed.

Note: The Debezium SQL Server component is currently not supported in OSGi

Maven users will need to add the following dependency to their pom.xml for this component.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-debezium-sqlserver</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

debezium-sqlserver:name[?options]

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Debezium SQL Server Connector component supports 73 options, which are listed below.

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

configuration (consumer)

Allow pre-configured Configurations to be set.

SqlServerConnectorEmbeddedDebeziumConfiguration

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

boolean

binaryHandlingMode (sqlserver)

Specify how binary (blob, binary, etc.) columns should be represented in change events, including:'bytes' represents binary data as byte array (default)'base64' represents binary data as base64-encoded string’hex' represents binary data as hex-encoded (base16) string.

String

columnBlacklist (sqlserver)

Regular expressions matching columns to exclude from change events (deprecated, use column.exclude.list instead).

String

columnExcludeList (sqlserver)

Regular expressions matching columns to exclude from change events.

String

columnIncludeList (sqlserver)

Regular expressions matching columns to include in change events.

String

columnPropagateSourceType (sqlserver)

A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

columnWhitelist (sqlserver)

Regular expressions matching columns to include in change events (deprecated, use column.include.list instead).

String

converters (sqlserver)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

databaseDbname (sqlserver)

The name of the database the connector should be monitoring.

String

databaseHistory (sqlserver)

The name of the DatabaseHistory class that should be used to store and recover database schema changes. The configuration properties for the history are prefixed with the 'database.history.' string.

String

databaseHistoryFileFilename (sqlserver)

The path to the file that will be used to record the database history.

String

databaseHistoryKafkaBootstrapServers (sqlserver)

A list of host/port pairs that the connector will use for establishing the initial connection to the Kafka cluster for retrieving database schema history previously stored by the connector. This should point to the same Kafka cluster used by the Kafka Connect process.

String

databaseHistoryKafkaRecoveryAttempts (sqlserver)

The number of attempts in a row that no data are returned from Kafka before recover completes. The maximum amount of time to wait after receiving no data is (recovery.attempts) x (recovery.poll.interval.ms).

int

databaseHistoryKafkaRecoveryPollIntervalMs (sqlserver)

The number of milliseconds to wait while polling for persisted data during recovery.

int

databaseHistoryKafkaTopic (sqlserver)

The name of the topic for the database schema history.

String

databaseHistorySkipUnparseableDdl (sqlserver)

Controls the action Debezium will take when it meets a DDL statement in binlog, that it cannot parse.By default the connector will stop operating but by changing the setting it can ignore the statements which it cannot parse. If skipping is enabled then Debezium can miss metadata changes.

boolean

databaseHistoryStoreOnlyCapturedTablesDdl (sqlserver)

Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a captured table will be stored.

boolean

databaseHistoryStoreOnlyMonitoredTablesDdl (sqlserver)

Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a monitored table will be stored (deprecated, use database.history.store.only.captured.tables.ddl instead).

boolean

databaseHostname (sqlserver)

Resolvable hostname or IP address of the database server.

String

databaseInstance (sqlserver)

The SQL Server instance name.

String

databasePassword (sqlserver)

Required Password of the database user to be used when connecting to the database.

String

databasePort (sqlserver)

Port of the database server.

int

databaseServerName (sqlserver)

Required Unique name that identifies the database server and all recorded offsets, and that is used as a prefix for all schemas and topics. Each distinct installation should have a separate namespace and be monitored by at most one Debezium connector.

String

databaseServerTimezone (sqlserver)

The timezone of the server used to correctly shift the commit transaction timestamp on the client sideOptions include: Any valid Java ZoneId.

String

databaseUser (sqlserver)

Name of the database user to be used when connecting to the database.

String

datatypePropagateSourceType (sqlserver)

A comma-separated list of regular expressions matching the database-specific data type names that adds the data type’s original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

decimalHandlingMode (sqlserver)

Specify how DECIMAL and NUMERIC columns should be represented in change events, including:'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect’s 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java’s 'double', which may not offer the precision but will be far easier to use in consumers.

String

eventProcessingFailureHandlingMode (sqlserver)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped;'ignore' the problematic event will be skipped.

String

heartbeatIntervalMs (sqlserver)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

int

heartbeatTopicsPrefix (sqlserver)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

String

includeSchemaChanges (sqlserver)

Whether the connector should publish changes in the database schema to a Kafka topic with the same name as the database server ID. Each schema change will be recorded using a key that contains the database name and whose value include logical description of the new schema and optionally the DDL statement(s).The default is 'true'. This is independent of how the connector internally records database history.

boolean

maxBatchSize (sqlserver)

Maximum size of each batch of source records. Defaults to 2048.

int

maxIterationTransactions (sqlserver)

This property can be used to reduce the connector memory usage footprint when changes are streamed from multiple tables per database.

int

maxQueueSize (sqlserver)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

int

maxQueueSizeInBytes (sqlserver)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

long

messageKeyColumns (sqlserver)

A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key. Each expression must match the pattern ':',where the table names could be defined as (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connector,and the key columns are a comma-separated list of columns representing the custom key. For any table without an explicit key configuration the table’s primary key column(s) will be used as message key.Example: dbserver1.inventory.orderlines:orderId,orderLineId;dbserver1.inventory.orders:id.

String

pollIntervalMs (sqlserver)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

long

provideTransactionMetadata (sqlserver)

Enables transaction metadata extraction together with event counting.

boolean

queryFetchSize (sqlserver)

The maximum number of records that should be loaded into memory while streaming. A value of 0 uses the default JDBC fetch size.

int

retriableRestartConnectorWaitMs (sqlserver)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

long

sanitizeFieldNames (sqlserver)

Whether field names will be sanitized to Avro naming conventions.

boolean

signalDataCollection (sqlserver)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

skippedOperations (sqlserver)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes. By default, no operations will be skipped.

String

snapshotDelayMs (sqlserver)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

long

snapshotFetchSize (sqlserver)

The maximum number of records that should be loaded into memory while performing a snapshot.

int

snapshotIncludeCollectionList (sqlserver)

this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotIsolationMode (sqlserver)

Controls which transaction isolation level is used and how long the connector locks the monitored tables. The default is 'repeatable_read', which means that repeatable read isolation level is used. In addition, exclusive locks are taken only during schema snapshot. Using a value of 'exclusive' ensures that the connector holds the exclusive lock (and thus prevents any reads and updates) for all monitored tables during the entire snapshot duration. When 'snapshot' is specified, connector runs the initial snapshot in SNAPSHOT isolation level, which guarantees snapshot consistency. In addition, neither table nor row-level locks are held. When 'read_committed' is specified, connector runs the initial snapshot in READ COMMITTED isolation level. No long-running locks are taken, so that initial snapshot does not prevent other transactions from updating table rows. Snapshot consistency is not guaranteed.In 'read_uncommitted' mode neither table nor row-level locks are acquired, but connector does not guarantee snapshot consistency.

String

snapshotLockTimeoutMs (sqlserver)

The maximum number of millis to wait for table locks at the beginning of a snapshot. If locks cannot be acquired in this time frame, the snapshot will be aborted. Defaults to 10 seconds.

long

snapshotMaxThreads (sqlserver)

The maximum number of threads used to perform the snapshot. Defaults to 1.

int

snapshotMode (sqlserver)

The criteria for running a snapshot upon startup of the connector. Options include: 'initial' (the default) to specify the connector should run a snapshot only when no offsets are available for the logical server name; 'schema_only' to specify the connector should run a snapshot of the schema when no offsets are available for the logical server name.

String

snapshotSelectStatementOverrides (sqlserver)

This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on thespecific connectors. Select statements for the individual tables are specified in further configuration properties, one for each table, identified by the id 'snapshot.select.statement.overrides.DB_NAME.TABLE_NAME' or 'snapshot.select.statement.overrides.SCHEMA_NAME.TABLE_NAME', respectively. The value of those properties is the select statement to use when retrieving data from the specific table during snapshotting. A possible use case for large append-only tables is setting a specific point where to start (resume) snapshotting, in case a previous snapshotting was interrupted.

String

sourceStructVersion (sqlserver)

A version of the format of the publicly visible source part in the message.

String

sourceTimestampMode (sqlserver)

Configures the criteria of the attached timestamp within the source record (ts_ms).Options include:'commit', (default) the source timestamp is set to the instant where the record was committed in the database’processing', (deprecated) the source timestamp is set to the instant where the record was processed by Debezium.

String

tableBlacklist (sqlserver)

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring (deprecated, use table.exclude.list instead).

String

tableExcludeList (sqlserver)

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring.

String

tableIgnoreBuiltin (sqlserver)

Flag specifying whether built-in tables should be ignored.

boolean

tableIncludeList (sqlserver)

The tables for which changes are to be captured.

String

tableWhitelist (sqlserver)

The tables for which changes are to be captured (deprecated, use table.include.list instead).

String

timePrecisionMode (sqlserver)

Time, date, and timestamps can be represented with different kinds of precisions, including:'adaptive' (the default) bases the precision of time, date, and timestamp values on the database column’s precision; 'adaptive_time_microseconds' like 'adaptive' mode, but TIME fields always use microseconds precision;'connect' always represents time, date, and timestamp values using Kafka Connect’s built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision .

String

tombstonesOnDelete (sqlserver)

Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

boolean

Endpoint Options

The Debezium SQL Server Connector endpoint is configured using URI syntax:

debezium-sqlserver:name

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

name (consumer)

Required Unique name for the connector. Attempting to register again with the same name will fail.

String

Query Parameters (73 parameters)

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

boolean

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

  • InOptionalOut

ExchangePattern

binaryHandlingMode (sqlserver)

Specify how binary (blob, binary, etc.) columns should be represented in change events, including:'bytes' represents binary data as byte array (default)'base64' represents binary data as base64-encoded string’hex' represents binary data as hex-encoded (base16) string.

String

columnBlacklist (sqlserver)

Regular expressions matching columns to exclude from change events (deprecated, use column.exclude.list instead).

String

columnExcludeList (sqlserver)

Regular expressions matching columns to exclude from change events.

String

columnIncludeList (sqlserver)

Regular expressions matching columns to include in change events.

String

columnPropagateSourceType (sqlserver)

A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

columnWhitelist (sqlserver)

Regular expressions matching columns to include in change events (deprecated, use column.include.list instead).

String

converters (sqlserver)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

databaseDbname (sqlserver)

The name of the database the connector should be monitoring.

String

databaseHistory (sqlserver)

The name of the DatabaseHistory class that should be used to store and recover database schema changes. The configuration properties for the history are prefixed with the 'database.history.' string.

String

databaseHistoryFileFilename (sqlserver)

The path to the file that will be used to record the database history.

String

databaseHistoryKafkaBootstrapServers (sqlserver)

A list of host/port pairs that the connector will use for establishing the initial connection to the Kafka cluster for retrieving database schema history previously stored by the connector. This should point to the same Kafka cluster used by the Kafka Connect process.

String

databaseHistoryKafkaRecoveryAttempts (sqlserver)

The number of attempts in a row that no data are returned from Kafka before recover completes. The maximum amount of time to wait after receiving no data is (recovery.attempts) x (recovery.poll.interval.ms).

int

databaseHistoryKafkaRecoveryPollIntervalMs (sqlserver)

The number of milliseconds to wait while polling for persisted data during recovery.

int

databaseHistoryKafkaTopic (sqlserver)

The name of the topic for the database schema history.

String

databaseHistorySkipUnparseableDdl (sqlserver)

Controls the action Debezium will take when it meets a DDL statement in binlog, that it cannot parse.By default the connector will stop operating but by changing the setting it can ignore the statements which it cannot parse. If skipping is enabled then Debezium can miss metadata changes.

boolean

databaseHistoryStoreOnlyCapturedTablesDdl (sqlserver)

Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a captured table will be stored.

boolean

databaseHistoryStoreOnlyMonitoredTablesDdl (sqlserver)

Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a monitored table will be stored (deprecated, use database.history.store.only.captured.tables.ddl instead).

boolean

databaseHostname (sqlserver)

Resolvable hostname or IP address of the database server.

String

databaseInstance (sqlserver)

The SQL Server instance name.

String

databasePassword (sqlserver)

Required Password of the database user to be used when connecting to the database.

String

databasePort (sqlserver)

Port of the database server.

int

databaseServerName (sqlserver)

Required Unique name that identifies the database server and all recorded offsets, and that is used as a prefix for all schemas and topics. Each distinct installation should have a separate namespace and be monitored by at most one Debezium connector.

String

databaseServerTimezone (sqlserver)

The timezone of the server used to correctly shift the commit transaction timestamp on the client sideOptions include: Any valid Java ZoneId.

String

databaseUser (sqlserver)

Name of the database user to be used when connecting to the database.

String

datatypePropagateSourceType (sqlserver)

A comma-separated list of regular expressions matching the database-specific data type names that adds the data type’s original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

decimalHandlingMode (sqlserver)

Specify how DECIMAL and NUMERIC columns should be represented in change events, including:'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect’s 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java’s 'double', which may not offer the precision but will be far easier to use in consumers.

String

eventProcessingFailureHandlingMode (sqlserver)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped;'ignore' the problematic event will be skipped.

String

heartbeatIntervalMs (sqlserver)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

int

heartbeatTopicsPrefix (sqlserver)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

String

includeSchemaChanges (sqlserver)

Whether the connector should publish changes in the database schema to a Kafka topic with the same name as the database server ID. Each schema change will be recorded using a key that contains the database name and whose value include logical description of the new schema and optionally the DDL statement(s).The default is 'true'. This is independent of how the connector internally records database history.

boolean

maxBatchSize (sqlserver)

Maximum size of each batch of source records. Defaults to 2048.

int

maxIterationTransactions (sqlserver)

This property can be used to reduce the connector memory usage footprint when changes are streamed from multiple tables per database.

int

maxQueueSize (sqlserver)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

int

maxQueueSizeInBytes (sqlserver)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

long

messageKeyColumns (sqlserver)

A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key. Each expression must match the pattern ':',where the table names could be defined as (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connector,and the key columns are a comma-separated list of columns representing the custom key. For any table without an explicit key configuration the table’s primary key column(s) will be used as message key.Example: dbserver1.inventory.orderlines:orderId,orderLineId;dbserver1.inventory.orders:id.

String

pollIntervalMs (sqlserver)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

long

provideTransactionMetadata (sqlserver)

Enables transaction metadata extraction together with event counting.

boolean

queryFetchSize (sqlserver)

The maximum number of records that should be loaded into memory while streaming. A value of 0 uses the default JDBC fetch size.

int

retriableRestartConnectorWaitMs (sqlserver)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

long

sanitizeFieldNames (sqlserver)

Whether field names will be sanitized to Avro naming conventions.

boolean

signalDataCollection (sqlserver)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

skippedOperations (sqlserver)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes. By default, no operations will be skipped.

String

snapshotDelayMs (sqlserver)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

long

snapshotFetchSize (sqlserver)

The maximum number of records that should be loaded into memory while performing a snapshot.

int

snapshotIncludeCollectionList (sqlserver)

this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotIsolationMode (sqlserver)

Controls which transaction isolation level is used and how long the connector locks the monitored tables. The default is 'repeatable_read', which means that repeatable read isolation level is used. In addition, exclusive locks are taken only during schema snapshot. Using a value of 'exclusive' ensures that the connector holds the exclusive lock (and thus prevents any reads and updates) for all monitored tables during the entire snapshot duration. When 'snapshot' is specified, connector runs the initial snapshot in SNAPSHOT isolation level, which guarantees snapshot consistency. In addition, neither table nor row-level locks are held. When 'read_committed' is specified, connector runs the initial snapshot in READ COMMITTED isolation level. No long-running locks are taken, so that initial snapshot does not prevent other transactions from updating table rows. Snapshot consistency is not guaranteed.In 'read_uncommitted' mode neither table nor row-level locks are acquired, but connector does not guarantee snapshot consistency.

String

snapshotLockTimeoutMs (sqlserver)

The maximum number of millis to wait for table locks at the beginning of a snapshot. If locks cannot be acquired in this time frame, the snapshot will be aborted. Defaults to 10 seconds.

long

snapshotMaxThreads (sqlserver)

The maximum number of threads used to perform the snapshot. Defaults to 1.

int

snapshotMode (sqlserver)

The criteria for running a snapshot upon startup of the connector. Options include: 'initial' (the default) to specify the connector should run a snapshot only when no offsets are available for the logical server name; 'schema_only' to specify the connector should run a snapshot of the schema when no offsets are available for the logical server name.

String

snapshotSelectStatementOverrides (sqlserver)

This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on thespecific connectors. Select statements for the individual tables are specified in further configuration properties, one for each table, identified by the id 'snapshot.select.statement.overrides.DB_NAME.TABLE_NAME' or 'snapshot.select.statement.overrides.SCHEMA_NAME.TABLE_NAME', respectively. The value of those properties is the select statement to use when retrieving data from the specific table during snapshotting. A possible use case for large append-only tables is setting a specific point where to start (resume) snapshotting, in case a previous snapshotting was interrupted.

String

sourceStructVersion (sqlserver)

A version of the format of the publicly visible source part in the message.

String

sourceTimestampMode (sqlserver)

Configures the criteria of the attached timestamp within the source record (ts_ms).Options include:'commit', (default) the source timestamp is set to the instant where the record was committed in the database’processing', (deprecated) the source timestamp is set to the instant where the record was processed by Debezium.

String

tableBlacklist (sqlserver)

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring (deprecated, use table.exclude.list instead).

String

tableExcludeList (sqlserver)

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring.

String

tableIgnoreBuiltin (sqlserver)

Flag specifying whether built-in tables should be ignored.

boolean

tableIncludeList (sqlserver)

The tables for which changes are to be captured.

String

tableWhitelist (sqlserver)

The tables for which changes are to be captured (deprecated, use table.include.list instead).

String

timePrecisionMode (sqlserver)

Time, date, and timestamps can be represented with different kinds of precisions, including:'adaptive' (the default) bases the precision of time, date, and timestamp values on the database column’s precision; 'adaptive_time_microseconds' like 'adaptive' mode, but TIME fields always use microseconds precision;'connect' always represents time, date, and timestamp values using Kafka Connect’s built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision .

String

tombstonesOnDelete (sqlserver)

Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

boolean

Message headers

Consumer headers

The following headers are available when consuming change events from Debezium.

Header constant Header value Type Description

DebeziumConstants.HEADER_IDENTIFIER

"CamelDebeziumIdentifier"

String

The identifier of the connector, normally is this format "{server-name}.{database-name}.{table-name}".

DebeziumConstants.HEADER_KEY

"CamelDebeziumKey"

Struct

The key of the event, normally is the table Primary Key.

DebeziumConstants.HEADER_SOURCE_METADATA

"CamelDebeziumSourceMetadata"

Map

The metadata about the source event, for example table name, database name, log position, etc, please refer to the Debezium documentation for more info.

DebeziumConstants.HEADER_OPERATION

"CamelDebeziumOperation"

String

If presents, the type of event operation. Values for the connector are c for create (or insert), u for update, d for delete or r in case of a snapshot event.

DebeziumConstants.HEADER_TIMESTAMP

"CamelDebeziumTimestamp"

Long

If presents, the time (using the system clock in the JVM) at which the connector processed the event.

DebeziumConstants.HEADER_BEFORE

"CamelDebeziumBefore"

Struct

If presents, contains the state of the row before the event occurred.

Message body

The message body if is not null (in case of tombstones), it contains the state of the row after the event occurred as Struct format or Map format if you use the included Type Converter from Struct to Map (please look below for more explanation).

Samples

Consuming events

Here is a very simple route that you can use in order to listen to Debezium events from SQL Server connector.

from("debezium-sqlserver:dbz-test-1?offsetStorageFileName=/usr/offset-file-1.dat&databaseHostName=localhost&databaseUser=debezium&databasePassword=dbz&databaseServerName=my-app-connector&databaseHistoryFileName=/usr/history-file-1.dat")
    .log("Event received from Debezium : ${body}")
    .log("    with this identifier ${headers.CamelDebeziumIdentifier}")
    .log("    with these source metadata ${headers.CamelDebeziumSourceMetadata}")
    .log("    the event occured upon this operation '${headers.CamelDebeziumSourceOperation}'")
    .log("    on this database '${headers.CamelDebeziumSourceMetadata[db]}' and this table '${headers.CamelDebeziumSourceMetadata[table]}'")
    .log("    with the key ${headers.CamelDebeziumKey}")
    .log("    the previous value is ${headers.CamelDebeziumBefore}")

By default, the component will emit the events in the body and CamelDebeziumBefore header as Struct data type, the reasoning behind this, is to perceive the schema information in case is needed. However, the component as well contains a Type Converter that converts from default output type of Struct to Map in order to leverage Camel’s rich Data Format types which many of them work out of box with Map data type. To use it, you can either add Map.class type when you access the message e.g: exchange.getIn().getBody(Map.class), or you can convert the body always to Map from the route builder by adding .convertBodyTo(Map.class) to your Camel Route DSL after from statement.

We mentioned above about the schema, which can be used in case you need to perform advance data transformation and the schema is needed for that. If you choose not to convert your body to Map, you can obtain the schema information as Schema type from Struct like this:

from("debezium-sqlserver:[name]?[options]])
    .process(exchange -> {
        final Struct bodyValue = exchange.getIn().getBody(Struct.class);
        final Schema schemaValue = bodyValue.schema();

        log.info("Body value is :" + bodyValue);
        log.info("With Schema : " + schemaValue);
        log.info("And fields of :" + schemaValue.fields());
        log.info("Field name has `" + schemaValue.field("name").schema() + "` type");
    });

Important Note: This component is a thin wrapper around Debezium Engine as mentioned, therefore before using this component in production, you need to understand how Debezium works and how configurations can reflect the expected behavior, especially in regards to handling failures.

Spring Boot Auto-Configuration

When using debezium-sqlserver with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-debezium-sqlserver-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 74 options, which are listed below.

Name Description Default Type

camel.component.debezium-sqlserver.additional-properties

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

camel.component.debezium-sqlserver.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.debezium-sqlserver.binary-handling-mode

Specify how binary (blob, binary, etc.) columns should be represented in change events, including:'bytes' represents binary data as byte array (default)'base64' represents binary data as base64-encoded string’hex' represents binary data as hex-encoded (base16) string.

bytes

String

camel.component.debezium-sqlserver.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.debezium-sqlserver.column-blacklist

Regular expressions matching columns to exclude from change events (deprecated, use column.exclude.list instead).

String

camel.component.debezium-sqlserver.column-exclude-list

Regular expressions matching columns to exclude from change events.

String

camel.component.debezium-sqlserver.column-include-list

Regular expressions matching columns to include in change events.

String

camel.component.debezium-sqlserver.column-propagate-source-type

A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

camel.component.debezium-sqlserver.column-whitelist

Regular expressions matching columns to include in change events (deprecated, use column.include.list instead).

String

camel.component.debezium-sqlserver.configuration

Allow pre-configured Configurations to be set. The option is a org.apache.camel.component.debezium.configuration.SqlServerConnectorEmbeddedDebeziumConfiguration type.

SqlServerConnectorEmbeddedDebeziumConfiguration

camel.component.debezium-sqlserver.converters

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

camel.component.debezium-sqlserver.database-dbname

The name of the database the connector should be monitoring.

String

camel.component.debezium-sqlserver.database-history

The name of the DatabaseHistory class that should be used to store and recover database schema changes. The configuration properties for the history are prefixed with the 'database.history.' string.

io.debezium.relational.history.FileDatabaseHistory

String

camel.component.debezium-sqlserver.database-history-file-filename

The path to the file that will be used to record the database history.

String

camel.component.debezium-sqlserver.database-history-kafka-bootstrap-servers

A list of host/port pairs that the connector will use for establishing the initial connection to the Kafka cluster for retrieving database schema history previously stored by the connector. This should point to the same Kafka cluster used by the Kafka Connect process.

String

camel.component.debezium-sqlserver.database-history-kafka-recovery-attempts

The number of attempts in a row that no data are returned from Kafka before recover completes. The maximum amount of time to wait after receiving no data is (recovery.attempts) x (recovery.poll.interval.ms).

100

Integer

camel.component.debezium-sqlserver.database-history-kafka-recovery-poll-interval-ms

The number of milliseconds to wait while polling for persisted data during recovery. The option is a int type.

100

Integer

camel.component.debezium-sqlserver.database-history-kafka-topic

The name of the topic for the database schema history.

String

camel.component.debezium-sqlserver.database-history-skip-unparseable-ddl

Controls the action Debezium will take when it meets a DDL statement in binlog, that it cannot parse.By default the connector will stop operating but by changing the setting it can ignore the statements which it cannot parse. If skipping is enabled then Debezium can miss metadata changes.

false

Boolean

camel.component.debezium-sqlserver.database-history-store-only-captured-tables-ddl

Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a captured table will be stored.

false

Boolean

camel.component.debezium-sqlserver.database-history-store-only-monitored-tables-ddl

Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a monitored table will be stored (deprecated, use database.history.store.only.captured.tables.ddl instead).

false

Boolean

camel.component.debezium-sqlserver.database-hostname

Resolvable hostname or IP address of the database server.

String

camel.component.debezium-sqlserver.database-instance

The SQL Server instance name.

String

camel.component.debezium-sqlserver.database-password

Password of the database user to be used when connecting to the database.

String

camel.component.debezium-sqlserver.database-port

Port of the database server.

1433

Integer

camel.component.debezium-sqlserver.database-server-name

Unique name that identifies the database server and all recorded offsets, and that is used as a prefix for all schemas and topics. Each distinct installation should have a separate namespace and be monitored by at most one Debezium connector.

String

camel.component.debezium-sqlserver.database-server-timezone

The timezone of the server used to correctly shift the commit transaction timestamp on the client sideOptions include: Any valid Java ZoneId.

String

camel.component.debezium-sqlserver.database-user

Name of the database user to be used when connecting to the database.

String

camel.component.debezium-sqlserver.datatype-propagate-source-type

A comma-separated list of regular expressions matching the database-specific data type names that adds the data type’s original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

camel.component.debezium-sqlserver.decimal-handling-mode

Specify how DECIMAL and NUMERIC columns should be represented in change events, including:'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect’s 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java’s 'double', which may not offer the precision but will be far easier to use in consumers.

precise

String

camel.component.debezium-sqlserver.enabled

Whether to enable auto configuration of the debezium-sqlserver component. This is enabled by default.

Boolean

camel.component.debezium-sqlserver.event-processing-failure-handling-mode

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped;'ignore' the problematic event will be skipped.

fail

String

camel.component.debezium-sqlserver.heartbeat-interval-ms

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default. The option is a int type.

0

Integer

camel.component.debezium-sqlserver.heartbeat-topics-prefix

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

camel.component.debezium-sqlserver.include-schema-changes

Whether the connector should publish changes in the database schema to a Kafka topic with the same name as the database server ID. Each schema change will be recorded using a key that contains the database name and whose value include logical description of the new schema and optionally the DDL statement(s).The default is 'true'. This is independent of how the connector internally records database history.

true

Boolean

camel.component.debezium-sqlserver.internal-key-converter

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-sqlserver.internal-value-converter

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-sqlserver.max-batch-size

Maximum size of each batch of source records. Defaults to 2048.

2048

Integer

camel.component.debezium-sqlserver.max-iteration-transactions

This property can be used to reduce the connector memory usage footprint when changes are streamed from multiple tables per database.

0

Integer

camel.component.debezium-sqlserver.max-queue-size

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

Integer

camel.component.debezium-sqlserver.max-queue-size-in-bytes

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

Long

camel.component.debezium-sqlserver.message-key-columns

A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key. Each expression must match the pattern ':',where the table names could be defined as (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connector,and the key columns are a comma-separated list of columns representing the custom key. For any table without an explicit key configuration the table’s primary key column(s) will be used as message key.Example: dbserver1.inventory.orderlines:orderId,orderLineId;dbserver1.inventory.orders:id.

String

camel.component.debezium-sqlserver.offset-commit-policy

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

io.debezium.embedded.spi.OffsetCommitPolicy.PeriodicCommitOffsetPolicy

String

camel.component.debezium-sqlserver.offset-commit-timeout-ms

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds. The option is a long type.

5000

Long

camel.component.debezium-sqlserver.offset-flush-interval-ms

Interval at which to try committing offsets. The default is 1 minute. The option is a long type.

60000

Long

camel.component.debezium-sqlserver.offset-storage

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

camel.component.debezium-sqlserver.offset-storage-file-name

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

camel.component.debezium-sqlserver.offset-storage-partitions

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

Integer

camel.component.debezium-sqlserver.offset-storage-replication-factor

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

Integer

camel.component.debezium-sqlserver.offset-storage-topic

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

camel.component.debezium-sqlserver.poll-interval-ms

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms. The option is a long type.

500

Long

camel.component.debezium-sqlserver.provide-transaction-metadata

Enables transaction metadata extraction together with event counting.

false

Boolean

camel.component.debezium-sqlserver.query-fetch-size

The maximum number of records that should be loaded into memory while streaming. A value of 0 uses the default JDBC fetch size.

0

Integer

camel.component.debezium-sqlserver.retriable-restart-connector-wait-ms

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms. The option is a long type.

10000

Long

camel.component.debezium-sqlserver.sanitize-field-names

Whether field names will be sanitized to Avro naming conventions.

false

Boolean

camel.component.debezium-sqlserver.signal-data-collection

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

camel.component.debezium-sqlserver.skipped-operations

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes. By default, no operations will be skipped.

String

camel.component.debezium-sqlserver.snapshot-delay-ms

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms. The option is a long type.

0

Long

camel.component.debezium-sqlserver.snapshot-fetch-size

The maximum number of records that should be loaded into memory while performing a snapshot.

Integer

camel.component.debezium-sqlserver.snapshot-include-collection-list

this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

camel.component.debezium-sqlserver.snapshot-isolation-mode

Controls which transaction isolation level is used and how long the connector locks the monitored tables. The default is 'repeatable_read', which means that repeatable read isolation level is used. In addition, exclusive locks are taken only during schema snapshot. Using a value of 'exclusive' ensures that the connector holds the exclusive lock (and thus prevents any reads and updates) for all monitored tables during the entire snapshot duration. When 'snapshot' is specified, connector runs the initial snapshot in SNAPSHOT isolation level, which guarantees snapshot consistency. In addition, neither table nor row-level locks are held. When 'read_committed' is specified, connector runs the initial snapshot in READ COMMITTED isolation level. No long-running locks are taken, so that initial snapshot does not prevent other transactions from updating table rows. Snapshot consistency is not guaranteed.In 'read_uncommitted' mode neither table nor row-level locks are acquired, but connector does not guarantee snapshot consistency.

repeatable_read

String

camel.component.debezium-sqlserver.snapshot-lock-timeout-ms

The maximum number of millis to wait for table locks at the beginning of a snapshot. If locks cannot be acquired in this time frame, the snapshot will be aborted. Defaults to 10 seconds. The option is a long type.

10000

Long

camel.component.debezium-sqlserver.snapshot-max-threads

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

Integer

camel.component.debezium-sqlserver.snapshot-mode

The criteria for running a snapshot upon startup of the connector. Options include: 'initial' (the default) to specify the connector should run a snapshot only when no offsets are available for the logical server name; 'schema_only' to specify the connector should run a snapshot of the schema when no offsets are available for the logical server name.

initial

String

camel.component.debezium-sqlserver.snapshot-select-statement-overrides

This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on thespecific connectors. Select statements for the individual tables are specified in further configuration properties, one for each table, identified by the id 'snapshot.select.statement.overrides.DB_NAME.TABLE_NAME' or 'snapshot.select.statement.overrides.SCHEMA_NAME.TABLE_NAME', respectively. The value of those properties is the select statement to use when retrieving data from the specific table during snapshotting. A possible use case for large append-only tables is setting a specific point where to start (resume) snapshotting, in case a previous snapshotting was interrupted.

String

camel.component.debezium-sqlserver.source-struct-version

A version of the format of the publicly visible source part in the message.

v2

String

camel.component.debezium-sqlserver.source-timestamp-mode

Configures the criteria of the attached timestamp within the source record (ts_ms).Options include:'commit', (default) the source timestamp is set to the instant where the record was committed in the database’processing', (deprecated) the source timestamp is set to the instant where the record was processed by Debezium.

commit

String

camel.component.debezium-sqlserver.table-blacklist

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring (deprecated, use table.exclude.list instead).

String

camel.component.debezium-sqlserver.table-exclude-list

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring.

String

camel.component.debezium-sqlserver.table-ignore-builtin

Flag specifying whether built-in tables should be ignored.

true

Boolean

camel.component.debezium-sqlserver.table-include-list

The tables for which changes are to be captured.

String

camel.component.debezium-sqlserver.table-whitelist

The tables for which changes are to be captured (deprecated, use table.include.list instead).

String

camel.component.debezium-sqlserver.time-precision-mode

Time, date, and timestamps can be represented with different kinds of precisions, including:'adaptive' (the default) bases the precision of time, date, and timestamp values on the database column’s precision; 'adaptive_time_microseconds' like 'adaptive' mode, but TIME fields always use microseconds precision;'connect' always represents time, date, and timestamp values using Kafka Connect’s built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision .

adaptive

String

camel.component.debezium-sqlserver.tombstones-on-delete

Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

Boolean