camel-yammer-kafka-connector source configuration

When using camel-yammer-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-yammer-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.yammer.CamelYammerSourceConnector

The camel-yammer source connector supports 46 options, which are listed below.

Name Description Default Priority

camel.source.path.function

The function to use One of: [MESSAGES] [MY_FEED] [ALGO] [FOLLOWING] [SENT] [PRIVATE] [RECEIVED] [USERS] [CURRENT]

null

HIGH

camel.source.endpoint.useJson

Set to true if you want to use raw JSON rather than converting to POJOs.

false

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.delay

Delay between polling in millis

5000L

MEDIUM

camel.source.endpoint.limit

Return only the specified number of messages. Works for threaded set to true and threaded set to extended.

-1

MEDIUM

camel.source.endpoint.newerThan

Returns messages newer than the message ID specified as a numeric string. This should be used when polling for new messages. If you’re looking at messages, and the most recent message returned is 3516, you can make a request with the parameter newerThan equals to 3516 to ensure that you do not get duplicate copies of messages already on your page.

-1L

MEDIUM

camel.source.endpoint.olderThan

Returns messages older than the message ID specified as a numeric string. This is useful for paginating messages. For example, if you’re currently viewing 20 messages and the oldest is number 2912, you could append olderThan equals to 2912 to your request to get the 20 messages prior to those you’re seeing.

-1L

MEDIUM

camel.source.endpoint.sendEmptyMessageWhenIdle

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

MEDIUM

camel.source.endpoint.threaded

threaded equals to true will only return the first message in each thread. This parameter is intended for apps which display message threads collapsed. threaded equals to extended will return the thread starter messages in order of most recently active as well as the two most recent messages, as they are viewed in the default view on the Yammer web interface. One of: [true] [extended]

null

MEDIUM

camel.source.endpoint.userId

The user id

null

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

MEDIUM

camel.source.endpoint.pollStrategy

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

null

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.requestor

To use a specific requester to communicate with Yammer.

null

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.backoffErrorThreshold

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

null

MEDIUM

camel.source.endpoint.backoffIdleThreshold

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

null

MEDIUM

camel.source.endpoint.backoffMultiplier

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

null

MEDIUM

camel.source.endpoint.greedy

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

MEDIUM

camel.source.endpoint.initialDelay

Milliseconds before the first poll starts.

1000L

MEDIUM

camel.source.endpoint.repeatCount

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0L

MEDIUM

camel.source.endpoint.runLoggingLevel

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"TRACE"

MEDIUM

camel.source.endpoint.scheduledExecutorService

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

null

MEDIUM

camel.source.endpoint.scheduler

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler

"none"

MEDIUM

camel.source.endpoint.schedulerProperties

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

null

MEDIUM

camel.source.endpoint.startScheduler

Whether the scheduler should be auto started.

true

MEDIUM

camel.source.endpoint.timeUnit

Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS]

"MILLISECONDS"

MEDIUM

camel.source.endpoint.useFixedDelay

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

MEDIUM

camel.source.endpoint.accessToken

The access token

null

HIGH

camel.source.endpoint.consumerKey

The consumer key

null

HIGH

camel.source.endpoint.consumerSecret

The consumer secret

null

HIGH

camel.component.yammer.useJson

Set to true if you want to use raw JSON rather than converting to POJOs.

false

MEDIUM

camel.component.yammer.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.component.yammer.delay

Delay between polling in millis

5000L

MEDIUM

camel.component.yammer.limit

Return only the specified number of messages. Works for threaded set to true and threaded set to extended.

-1

MEDIUM

camel.component.yammer.newerThan

Returns messages newer than the message ID specified as a numeric string. This should be used when polling for new messages. If you’re looking at messages, and the most recent message returned is 3516, you can make a request with the parameter newerThan equals to 3516 to ensure that you do not get duplicate copies of messages already on your page.

-1L

MEDIUM

camel.component.yammer.olderThan

Returns messages older than the message ID specified as a numeric string. This is useful for paginating messages. For example, if you’re currently viewing 20 messages and the oldest is number 2912, you could append olderThan equals to 2912 to your request to get the 20 messages prior to those you’re seeing.

-1L

MEDIUM

camel.component.yammer.threaded

threaded equals to true will only return the first message in each thread. This parameter is intended for apps which display message threads collapsed. threaded equals to extended will return the thread starter messages in order of most recently active as well as the two most recent messages, as they are viewed in the default view on the Yammer web interface. One of: [true] [extended]

null

MEDIUM

camel.component.yammer.userId

The user id

null

MEDIUM

camel.component.yammer.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.yammer.configuration

Component configuration

null

MEDIUM

camel.component.yammer.requestor

To use a specific requester to communicate with Yammer.

null

MEDIUM

camel.component.yammer.accessToken

The access token

null

HIGH

camel.component.yammer.consumerKey

The consumer key

null

HIGH

camel.component.yammer.consumerSecret

The consumer secret

null

HIGH

The camel-yammer sink connector has no converters out of the box.

The camel-yammer sink connector has no transforms out of the box.

The camel-yammer sink connector has no aggregation strategies out of the box.