camel-smpp-kafka-connector source configuration

When using camel-smpp-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-smpp-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.smpp.CamelSmppSourceConnector

The camel-smpp source connector supports 50 options, which are listed below.

Name Description Default Priority

camel.source.path.host

Hostname for the SMSC server to use.

"localhost"

MEDIUM

camel.source.path.port

Port number for the SMSC server to use.

"2775"

MEDIUM

camel.source.endpoint.initialReconnectDelay

Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost.

5000L

MEDIUM

camel.source.endpoint.maxReconnect

Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response

2147483647

MEDIUM

camel.source.endpoint.reconnectDelay

Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed.

5000L

MEDIUM

camel.source.endpoint.splittingPolicy

You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC. Some carriers drop subsequent fragments so this reduces load on the SMPP connection sending parts of a message that will never be delivered. REJECT - if a message would need to be split, it is rejected with an SMPP NegativeResponseException and the reason code signifying the message is too long. One of: [ALLOW] [REJECT] [TRUNCATE]

"ALLOW"

MEDIUM

camel.source.endpoint.systemType

This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max. 13 characters).

null

MEDIUM

camel.source.endpoint.addressRange

You can specify the address range for the SmppConsumer as defined in section 5.2.7 of the SMPP 3.4 specification. The SmppConsumer will receive messages only from SMSC’s which target an address (MSISDN or IP address) within this range.

null

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.enquireLinkTimer

Defines the interval in milliseconds between the confidence checks. The confidence check is used to test the communication path between an ESME and an SMSC.

"5000"

MEDIUM

camel.source.endpoint.sessionStateListener

You can refer to a org.jsmpp.session.SessionStateListener in the Registry to receive callbacks when the session state changed.

null

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.transactionTimer

Defines the maximum period of inactivity allowed after a transaction, after which an SMPP entity may assume that the session is no longer active. This timer may be active on either communicating SMPP entity (i.e. SMSC or ESME).

"10000"

MEDIUM

camel.source.endpoint.alphabet

Defines encoding of data according the SMPP 3.4 specification, section 5.2.19. 0: SMSC Default Alphabet 4: 8 bit Alphabet 8: UCS2 Alphabet One of: [0] [4] [8]

null

MEDIUM

camel.source.endpoint.dataCoding

Defines the data coding according the SMPP 3.4 specification, section 5.2.19. Example data encodings are: 0: SMSC Default Alphabet 3: Latin 1 (ISO-8859-1) 4: Octet unspecified (8-bit binary) 8: UCS2 (ISO/IEC-10646) 13: Extended Kanji JIS(X 0212-1990)

null

MEDIUM

camel.source.endpoint.encoding

Defines the encoding scheme of the short message user data. Only for SubmitSm, ReplaceSm and SubmitMulti.

"ISO-8859-1"

MEDIUM

camel.source.endpoint.httpProxyHost

If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy.

null

MEDIUM

camel.source.endpoint.httpProxyPassword

If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy.

null

MEDIUM

camel.source.endpoint.httpProxyPort

If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy.

"3128"

MEDIUM

camel.source.endpoint.httpProxyUsername

If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy.

null

MEDIUM

camel.source.endpoint.proxyHeaders

These headers will be passed to the proxy server while establishing the connection.

null

MEDIUM

camel.source.endpoint.password

The password for connecting to SMSC server.

null

MEDIUM

camel.source.endpoint.systemId

The system id (username) for connecting to SMSC server.

"smppclient"

MEDIUM

camel.source.endpoint.usingSSL

Whether using SSL with the smpps protocol

false

MEDIUM

camel.component.smpp.initialReconnectDelay

Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost.

5000L

MEDIUM

camel.component.smpp.maxReconnect

Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response

2147483647

MEDIUM

camel.component.smpp.reconnectDelay

Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed.

5000L

MEDIUM

camel.component.smpp.splittingPolicy

You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC. Some carriers drop subsequent fragments so this reduces load on the SMPP connection sending parts of a message that will never be delivered. REJECT - if a message would need to be split, it is rejected with an SMPP NegativeResponseException and the reason code signifying the message is too long. One of: [ALLOW] [REJECT] [TRUNCATE]

"ALLOW"

MEDIUM

camel.component.smpp.systemType

This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max. 13 characters).

null

MEDIUM

camel.component.smpp.addressRange

You can specify the address range for the SmppConsumer as defined in section 5.2.7 of the SMPP 3.4 specification. The SmppConsumer will receive messages only from SMSC’s which target an address (MSISDN or IP address) within this range.

null

MEDIUM

camel.component.smpp.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.component.smpp.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.smpp.configuration

To use the shared SmppConfiguration as configuration.

null

MEDIUM

camel.component.smpp.enquireLinkTimer

Defines the interval in milliseconds between the confidence checks. The confidence check is used to test the communication path between an ESME and an SMSC.

"5000"

MEDIUM

camel.component.smpp.sessionStateListener

You can refer to a org.jsmpp.session.SessionStateListener in the Registry to receive callbacks when the session state changed.

null

MEDIUM

camel.component.smpp.transactionTimer

Defines the maximum period of inactivity allowed after a transaction, after which an SMPP entity may assume that the session is no longer active. This timer may be active on either communicating SMPP entity (i.e. SMSC or ESME).

"10000"

MEDIUM

camel.component.smpp.alphabet

Defines encoding of data according the SMPP 3.4 specification, section 5.2.19. 0: SMSC Default Alphabet 4: 8 bit Alphabet 8: UCS2 Alphabet One of: [0] [4] [8]

null

MEDIUM

camel.component.smpp.dataCoding

Defines the data coding according the SMPP 3.4 specification, section 5.2.19. Example data encodings are: 0: SMSC Default Alphabet 3: Latin 1 (ISO-8859-1) 4: Octet unspecified (8-bit binary) 8: UCS2 (ISO/IEC-10646) 13: Extended Kanji JIS(X 0212-1990)

null

MEDIUM

camel.component.smpp.encoding

Defines the encoding scheme of the short message user data. Only for SubmitSm, ReplaceSm and SubmitMulti.

"ISO-8859-1"

MEDIUM

camel.component.smpp.httpProxyHost

If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy.

null

MEDIUM

camel.component.smpp.httpProxyPassword

If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy.

null

MEDIUM

camel.component.smpp.httpProxyPort

If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy.

"3128"

MEDIUM

camel.component.smpp.httpProxyUsername

If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy.

null

MEDIUM

camel.component.smpp.proxyHeaders

These headers will be passed to the proxy server while establishing the connection.

null

MEDIUM

camel.component.smpp.password

The password for connecting to SMSC server.

null

MEDIUM

camel.component.smpp.systemId

The system id (username) for connecting to SMSC server.

"smppclient"

MEDIUM

camel.component.smpp.usingSSL

Whether using SSL with the smpps protocol

false

MEDIUM

The camel-smpp sink connector has no converters out of the box.

The camel-smpp sink connector has no transforms out of the box.

The camel-smpp sink connector has no aggregation strategies out of the box.