camel-minio-kafka-connector source configuration

When using camel-minio-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-minio-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.minio.CamelMinioSourceConnector

The camel-minio source connector supports 101 options, which are listed below.

Name Description Default Priority

camel.source.path.bucketName

Bucket name

null

HIGH

camel.source.endpoint.autoCreateBucket

Setting the autocreation of the bucket if bucket name not exist.

true

MEDIUM

camel.source.endpoint.customHttpClient

Set custom HTTP client for authenticated access.

null

MEDIUM

camel.source.endpoint.endpoint

Endpoint can be an URL, domain name, IPv4 address or IPv6 address.

null

MEDIUM

camel.source.endpoint.minioClient

Reference to a Minio Client object in the registry.

null

MEDIUM

camel.source.endpoint.objectLock

Set when creating new bucket.

false

MEDIUM

camel.source.endpoint.policy

The policy for this queue to set in the method.

null

MEDIUM

camel.source.endpoint.proxyPort

TCP/IP port number. 80 and 443 are used as defaults for HTTP and HTTPS.

null

MEDIUM

camel.source.endpoint.region

The region in which Minio client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1). You’ll need to use the name Region.EU_WEST_1.id()

null

MEDIUM

camel.source.endpoint.secure

Flag to indicate to use secure connection to minio service or not.

false

MEDIUM

camel.source.endpoint.serverSideEncryption

Server-side encryption.

null

MEDIUM

camel.source.endpoint.serverSideEncryptionCustomer Key

Server-side encryption for source object while copy/move objects.

null

MEDIUM

camel.source.endpoint.autoCloseBody

If this option is true and includeBody is true, then the MinioObject.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.

true

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.bypassGovernanceMode

Set this flag if you want to bypassGovernanceMode when deleting a particular object.

false

MEDIUM

camel.source.endpoint.deleteAfterRead

Delete objects from Minio after they have been retrieved. The delete is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieve over and over again on the polls. Therefore you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the MinioConstants#BUCKET_NAME and MinioConstants#OBJECT_NAME headers, or only the MinioConstants#OBJECT_NAME header.

true

MEDIUM

camel.source.endpoint.delimiter

The delimiter which is used in the ListObjectsRequest to only consume objects we are interested in.

null

MEDIUM

camel.source.endpoint.destinationBucketName

Source bucket name.

null

MEDIUM

camel.source.endpoint.destinationObjectName

Source object name.

null

MEDIUM

camel.source.endpoint.includeBody

If it is true, the exchange body will be set to a stream to the contents of the file. If false, the headers will be set with the Minio object metadata, but the body will be null. This option is strongly related to autocloseBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.

true

MEDIUM

camel.source.endpoint.includeFolders

The flag which is used in the ListObjectsRequest to set include folders.

false

MEDIUM

camel.source.endpoint.includeUserMetadata

The flag which is used in the ListObjectsRequest to get objects with user meta data.

false

MEDIUM

camel.source.endpoint.includeVersions

The flag which is used in the ListObjectsRequest to get objects with versioning.

false

MEDIUM

camel.source.endpoint.length

Number of bytes of object data from offset.

null

MEDIUM

camel.source.endpoint.matchETag

Set match ETag parameter for get object(s).

null

MEDIUM

camel.source.endpoint.maxConnections

Set the maxConnections parameter in the minio client configuration

60

MEDIUM

camel.source.endpoint.maxMessagesPerPoll

Gets the maximum number of messages as a limit to poll at each polling. Gets the maximum number of messages as a limit to poll at each polling. The default value is 10. Use 0 or a negative number to set it as unlimited.

10

MEDIUM

camel.source.endpoint.modifiedSince

Set modified since parameter for get object(s).

null

MEDIUM

camel.source.endpoint.moveAfterRead

Move objects from bucket to a different bucket after they have been retrieved. To accomplish the operation the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.

false

MEDIUM

camel.source.endpoint.notMatchETag

Set not match ETag parameter for get object(s).

null

MEDIUM

camel.source.endpoint.objectName

To get the object from the bucket with the given object name.

null

MEDIUM

camel.source.endpoint.offset

Start byte position of object data.

null

MEDIUM

camel.source.endpoint.prefix

Object name starts with prefix.

null

MEDIUM

camel.source.endpoint.recursive

List recursively than directory structure emulation.

false

MEDIUM

camel.source.endpoint.sendEmptyMessageWhenIdle

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

MEDIUM

camel.source.endpoint.startAfter

list objects in bucket after this object name.

null

MEDIUM

camel.source.endpoint.unModifiedSince

Set un modified since parameter for get object(s).

null

MEDIUM

camel.source.endpoint.useVersion1

when true, version 1 of REST API is used.

false

MEDIUM

camel.source.endpoint.versionId

Set specific version_ID of a object when deleting the object.

null

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

MEDIUM

camel.source.endpoint.pollStrategy

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

null

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.backoffErrorThreshold

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

null

MEDIUM

camel.source.endpoint.backoffIdleThreshold

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

null

MEDIUM

camel.source.endpoint.backoffMultiplier

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

null

MEDIUM

camel.source.endpoint.delay

Milliseconds before the next poll.

500L

MEDIUM

camel.source.endpoint.greedy

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

MEDIUM

camel.source.endpoint.initialDelay

Milliseconds before the first poll starts.

1000L

MEDIUM

camel.source.endpoint.repeatCount

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0L

MEDIUM

camel.source.endpoint.runLoggingLevel

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"TRACE"

MEDIUM

camel.source.endpoint.scheduledExecutorService

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

null

MEDIUM

camel.source.endpoint.scheduler

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler

"none"

MEDIUM

camel.source.endpoint.schedulerProperties

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

null

MEDIUM

camel.source.endpoint.startScheduler

Whether the scheduler should be auto started.

true

MEDIUM

camel.source.endpoint.timeUnit

Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS]

"MILLISECONDS"

MEDIUM

camel.source.endpoint.useFixedDelay

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

MEDIUM

camel.source.endpoint.accessKey

Amazon AWS Secret Access Key or Minio Access Key. If not set camel will connect to service for anonymous access.

null

MEDIUM

camel.source.endpoint.secretKey

Amazon AWS Access Key Id or Minio Secret Key. If not set camel will connect to service for anonymous access.

null

MEDIUM

camel.component.minio.autoCreateBucket

Setting the autocreation of the bucket if bucket name not exist.

true

MEDIUM

camel.component.minio.configuration

The component configuration

null

MEDIUM

camel.component.minio.customHttpClient

Set custom HTTP client for authenticated access.

null

MEDIUM

camel.component.minio.endpoint

Endpoint can be an URL, domain name, IPv4 address or IPv6 address.

null

MEDIUM

camel.component.minio.minioClient

Reference to a Minio Client object in the registry.

null

MEDIUM

camel.component.minio.objectLock

Set when creating new bucket.

false

MEDIUM

camel.component.minio.policy

The policy for this queue to set in the method.

null

MEDIUM

camel.component.minio.proxyPort

TCP/IP port number. 80 and 443 are used as defaults for HTTP and HTTPS.

null

MEDIUM

camel.component.minio.region

The region in which Minio client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1). You’ll need to use the name Region.EU_WEST_1.id()

null

MEDIUM

camel.component.minio.secure

Flag to indicate to use secure connection to minio service or not.

false

MEDIUM

camel.component.minio.serverSideEncryption

Server-side encryption.

null

MEDIUM

camel.component.minio.serverSideEncryptionCustomer Key

Server-side encryption for source object while copy/move objects.

null

MEDIUM

camel.component.minio.autoCloseBody

If this option is true and includeBody is true, then the MinioObject.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.

true

MEDIUM

camel.component.minio.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.component.minio.bypassGovernanceMode

Set this flag if you want to bypassGovernanceMode when deleting a particular object.

false

MEDIUM

camel.component.minio.deleteAfterRead

Delete objects from Minio after they have been retrieved. The delete is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieve over and over again on the polls. Therefore you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the MinioConstants#BUCKET_NAME and MinioConstants#OBJECT_NAME headers, or only the MinioConstants#OBJECT_NAME header.

true

MEDIUM

camel.component.minio.delimiter

The delimiter which is used in the ListObjectsRequest to only consume objects we are interested in.

null

MEDIUM

camel.component.minio.destinationBucketName

Source bucket name.

null

MEDIUM

camel.component.minio.destinationObjectName

Source object name.

null

MEDIUM

camel.component.minio.includeBody

If it is true, the exchange body will be set to a stream to the contents of the file. If false, the headers will be set with the Minio object metadata, but the body will be null. This option is strongly related to autocloseBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.

true

MEDIUM

camel.component.minio.includeFolders

The flag which is used in the ListObjectsRequest to set include folders.

false

MEDIUM

camel.component.minio.includeUserMetadata

The flag which is used in the ListObjectsRequest to get objects with user meta data.

false

MEDIUM

camel.component.minio.includeVersions

The flag which is used in the ListObjectsRequest to get objects with versioning.

false

MEDIUM

camel.component.minio.length

Number of bytes of object data from offset.

null

MEDIUM

camel.component.minio.matchETag

Set match ETag parameter for get object(s).

null

MEDIUM

camel.component.minio.maxConnections

Set the maxConnections parameter in the minio client configuration

60

MEDIUM

camel.component.minio.maxMessagesPerPoll

Gets the maximum number of messages as a limit to poll at each polling. Gets the maximum number of messages as a limit to poll at each polling. The default value is 10. Use 0 or a negative number to set it as unlimited.

10

MEDIUM

camel.component.minio.modifiedSince

Set modified since parameter for get object(s).

null

MEDIUM

camel.component.minio.moveAfterRead

Move objects from bucket to a different bucket after they have been retrieved. To accomplish the operation the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.

false

MEDIUM

camel.component.minio.notMatchETag

Set not match ETag parameter for get object(s).

null

MEDIUM

camel.component.minio.objectName

To get the object from the bucket with the given object name.

null

MEDIUM

camel.component.minio.offset

Start byte position of object data.

null

MEDIUM

camel.component.minio.prefix

Object name starts with prefix.

null

MEDIUM

camel.component.minio.recursive

List recursively than directory structure emulation.

false

MEDIUM

camel.component.minio.startAfter

list objects in bucket after this object name.

null

MEDIUM

camel.component.minio.unModifiedSince

Set un modified since parameter for get object(s).

null

MEDIUM

camel.component.minio.useVersion1

when true, version 1 of REST API is used.

false

MEDIUM

camel.component.minio.versionId

Set specific version_ID of a object when deleting the object.

null

MEDIUM

camel.component.minio.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.minio.accessKey

Amazon AWS Secret Access Key or Minio Access Key. If not set camel will connect to service for anonymous access.

null

MEDIUM

camel.component.minio.secretKey

Amazon AWS Access Key Id or Minio Secret Key. If not set camel will connect to service for anonymous access.

null

MEDIUM

The camel-minio sink connector has no converters out of the box.

The camel-minio sink connector has no transforms out of the box.

The camel-minio sink connector has no aggregation strategies out of the box.