camel-jms-kafka-connector sink configuration

When using camel-jms-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-jms-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.jms.CamelJmsSinkConnector

The camel-jms sink connector supports 143 options, which are listed below.

Name Description Default Priority

camel.sink.path.destinationType

The kind of destination to use One of: [queue] [topic] [temp-queue] [temp-topic]

"queue"

MEDIUM

camel.sink.path.destinationName

Name of the queue or topic to use as destination

null

HIGH

camel.sink.endpoint.clientId

Sets the JMS client ID to use. Note that this value, if specified, must be unique and can only be used by a single JMS connection instance. It is typically only required for durable topic subscriptions. If using Apache ActiveMQ you may prefer to use Virtual Topics instead.

null

MEDIUM

camel.sink.endpoint.connectionFactory

The connection factory to be use. A connection factory must be configured either on the component or endpoint.

null

MEDIUM

camel.sink.endpoint.disableReplyTo

Specifies whether Camel ignores the JMSReplyTo header in messages. If true, Camel does not send a reply back to the destination specified in the JMSReplyTo header. You can use this option if you want Camel to consume from a route and you do not want Camel to automatically send back a reply message because another component in your code handles the reply message. You can also use this option if you want to use Camel as a proxy between different message brokers and you want to route message from one system to another.

false

MEDIUM

camel.sink.endpoint.durableSubscriptionName

The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.

null

MEDIUM

camel.sink.endpoint.jmsMessageType

Allows you to force the use of a specific javax.jms.Message implementation for sending JMS messages. Possible values are: Bytes, Map, Object, Stream, Text. By default, Camel would determine which JMS message type to use from the In body type. This option allows you to specify it. One of: [Bytes] [Map] [Object] [Stream] [Text]

null

MEDIUM

camel.sink.endpoint.testConnectionOnStartup

Specifies whether to test the connection on startup. This ensures that when Camel starts that all the JMS consumers have a valid connection to the JMS broker. If a connection cannot be granted then Camel throws an exception on startup. This ensures that Camel is not started with failed connections. The JMS producers is tested as well.

false

MEDIUM

camel.sink.endpoint.deliveryDelay

Sets delivery delay to use for send calls for JMS. This option requires JMS 2.0 compliant broker.

-1L

MEDIUM

camel.sink.endpoint.deliveryMode

Specifies the delivery mode to be used. Possibles values are those defined by javax.jms.DeliveryMode. NON_PERSISTENT = 1 and PERSISTENT = 2. One of: [1] [2]

null

MEDIUM

camel.sink.endpoint.deliveryPersistent

Specifies whether persistent delivery is used by default.

true

MEDIUM

camel.sink.endpoint.explicitQosEnabled

Set if the deliveryMode, priority or timeToLive qualities of service should be used when sending messages. This option is based on Spring’s JmsTemplate. The deliveryMode, priority and timeToLive options are applied to the current endpoint. This contrasts with the preserveMessageQos option, which operates at message granularity, reading QoS properties exclusively from the Camel In message headers.

"false"

MEDIUM

camel.sink.endpoint.formatDateHeadersToIso8601

Sets whether JMS date properties should be formatted according to the ISO 8601 standard.

false

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.preserveMessageQos

Set to true, if you want to send message using the QoS settings specified on the message, instead of the QoS settings on the JMS endpoint. The following three headers are considered JMSPriority, JMSDeliveryMode, and JMSExpiration. You can provide all or only some of them. If not provided, Camel will fall back to use the values from the endpoint instead. So, when using this option, the headers override the values from the endpoint. The explicitQosEnabled option, by contrast, will only use options set on the endpoint, and not values from the message header.

false

MEDIUM

camel.sink.endpoint.priority

Values greater than 1 specify the message priority when sending (where 0 is the lowest priority and 9 is the highest). The explicitQosEnabled option must also be enabled in order for this option to have any effect. One of: [1] [2] [3] [4] [5] [6] [7] [8] [9]

4

MEDIUM

camel.sink.endpoint.replyToConcurrentConsumers

Specifies the default number of concurrent consumers when doing request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

1

MEDIUM

camel.sink.endpoint.replyToMaxConcurrentConsumers

Specifies the maximum number of concurrent consumers when using request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

null

MEDIUM

camel.sink.endpoint.replyToOnTimeoutMaxConcurrent Consumers

Specifies the maximum number of concurrent consumers for continue routing when timeout occurred when using request/reply over JMS.

1

MEDIUM

camel.sink.endpoint.replyToOverride

Provides an explicit ReplyTo destination in the JMS message, which overrides the setting of replyTo. It is useful if you want to forward the message to a remote Queue and receive the reply message from the ReplyTo destination.

null

MEDIUM

camel.sink.endpoint.replyToType

Allows for explicitly specifying which kind of strategy to use for replyTo queues when doing request/reply over JMS. Possible values are: Temporary, Shared, or Exclusive. By default Camel will use temporary queues. However if replyTo has been configured, then Shared is used by default. This option allows you to use exclusive queues instead of shared ones. See Camel JMS documentation for more details, and especially the notes about the implications if running in a clustered environment, and the fact that Shared reply queues has lower performance than its alternatives Temporary and Exclusive. One of: [Temporary] [Shared] [Exclusive]

null

MEDIUM

camel.sink.endpoint.requestTimeout

The timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds). The default is 20 seconds. You can include the header CamelJmsRequestTimeout to override this endpoint configured timeout value, and thus have per message individual timeout values. See also the requestTimeoutCheckerInterval option.

20000L

MEDIUM

camel.sink.endpoint.timeToLive

When sending messages, specifies the time-to-live of the message (in milliseconds).

-1L

MEDIUM

camel.sink.endpoint.allowAdditionalHeaders

This option is used to allow additional headers which may have values that are invalid according to JMS specification. For example some message systems such as WMQ do this with header names using prefix JMS_IBM_MQMD_ containing values with byte array or other invalid types. You can specify multiple header names separated by comma, and use as suffix for wildcard matching.

null

MEDIUM

camel.sink.endpoint.allowNullBody

Whether to allow sending messages with no body. If this option is false and the message body is null, then an JMSException is thrown.

true

MEDIUM

camel.sink.endpoint.alwaysCopyMessage

If true, Camel will always make a JMS message copy of the message when it is passed to the producer for sending. Copying the message is needed in some situations, such as when a replyToDestinationSelectorName is set (incidentally, Camel will set the alwaysCopyMessage option to true, if a replyToDestinationSelectorName is set)

false

MEDIUM

camel.sink.endpoint.correlationProperty

When using InOut exchange pattern use this JMS property instead of JMSCorrelationID JMS property to correlate messages. If set messages will be correlated solely on the value of this property JMSCorrelationID property will be ignored and not set by Camel.

null

MEDIUM

camel.sink.endpoint.disableTimeToLive

Use this option to force disabling time to live. For example when you do request/reply over JMS, then Camel will by default use the requestTimeout value as time to live on the message being sent. The problem is that the sender and receiver systems have to have their clocks synchronized, so they are in sync. This is not always so easy to archive. So you can use disableTimeToLive=true to not set a time to live value on the sent message. Then the message will not expire on the receiver system. See below in section About time to live for more details.

false

MEDIUM

camel.sink.endpoint.forceSendOriginalMessage

When using mapJmsMessage=false Camel will create a new JMS message to send to a new JMS destination if you touch the headers (get or set) during the route. Set this option to true to force Camel to send the original JMS message that was received.

false

MEDIUM

camel.sink.endpoint.includeSentJMSMessageID

Only applicable when sending to JMS destination using InOnly (eg fire and forget). Enabling this option will enrich the Camel Exchange with the actual JMSMessageID that was used by the JMS client when the message was sent to the JMS destination.

false

MEDIUM

camel.sink.endpoint.replyToCacheLevelName

Sets the cache level by name for the reply consumer when doing request/reply over JMS. This option only applies when using fixed reply queues (not temporary). Camel will by default use: CACHE_CONSUMER for exclusive or shared w/ replyToSelectorName. And CACHE_SESSION for shared without replyToSelectorName. Some JMS brokers such as IBM WebSphere may require to set the replyToCacheLevelName=CACHE_NONE to work. Note: If using temporary queues then CACHE_NONE is not allowed, and you must use a higher value such as CACHE_CONSUMER or CACHE_SESSION. One of: [CACHE_AUTO] [CACHE_CONNECTION] [CACHE_CONSUMER] [CACHE_NONE] [CACHE_SESSION]

null

MEDIUM

camel.sink.endpoint.replyToDestinationSelectorName

Sets the JMS Selector using the fixed name to be used so you can filter out your own replies from the others when using a shared queue (that is, if you are not using a temporary reply queue).

null

MEDIUM

camel.sink.endpoint.streamMessageTypeEnabled

Sets whether StreamMessage type is enabled or not. Message payloads of streaming kind such as files, InputStream, etc will either by sent as BytesMessage or StreamMessage. This option controls which kind will be used. By default BytesMessage is used which enforces the entire message payload to be read into memory. By enabling this option the message payload is read into memory in chunks and each chunk is then written to the StreamMessage until no more data.

false

MEDIUM

camel.sink.endpoint.allowSerializedHeaders

Controls whether or not to include serialized headers. Applies only when transferExchange is true. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.sink.endpoint.artemisStreamingEnabled

Whether optimizing for Apache Artemis streaming mode.

true

MEDIUM

camel.sink.endpoint.asyncStartListener

Whether to startup the JmsConsumer message listener asynchronously, when starting a route. For example if a JmsConsumer cannot get a connection to a remote JMS broker, then it may block while retrying and/or failover. This will cause Camel to block while starting routes. By setting this option to true, you will let routes startup, while the JmsConsumer connects to the JMS broker using a dedicated thread in asynchronous mode. If this option is used, then beware that if the connection could not be established, then an exception is logged at WARN level, and the consumer will not be able to receive messages; You can then restart the route to retry.

false

MEDIUM

camel.sink.endpoint.asyncStopListener

Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.

false

MEDIUM

camel.sink.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.sink.endpoint.destinationResolver

A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry).

null

MEDIUM

camel.sink.endpoint.errorHandler

Specifies a org.springframework.util.ErrorHandler to be invoked in case of any uncaught exceptions thrown while processing a Message. By default these exceptions will be logged at the WARN level, if no errorHandler has been configured. You can configure logging level and whether stack traces should be logged using errorHandlerLoggingLevel and errorHandlerLogStackTrace options. This makes it much easier to configure, than having to code a custom errorHandler.

null

MEDIUM

camel.sink.endpoint.exceptionListener

Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions.

null

MEDIUM

camel.sink.endpoint.headerFilterStrategy

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

null

MEDIUM

camel.sink.endpoint.idleConsumerLimit

Specify the limit for the number of consumers that are allowed to be idle at any given time.

1

MEDIUM

camel.sink.endpoint.idleTaskExecutionLimit

Specifies the limit for idle executions of a receive task, not having received any message within its execution. If this limit is reached, the task will shut down and leave receiving to other executing tasks (in the case of dynamic scheduling; see the maxConcurrentConsumers setting). There is additional doc available from Spring.

1

MEDIUM

camel.sink.endpoint.includeAllJMSXProperties

Whether to include all JMSXxxx properties when mapping from JMS to Camel Message. Setting this to true will include properties such as JMSXAppID, and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy then this option does not apply.

false

MEDIUM

camel.sink.endpoint.jmsKeyFormatStrategy

Pluggable strategy for encoding and decoding JMS keys so they can be compliant with the JMS specification. Camel provides two implementations out of the box: default and passthrough. The default strategy will safely marshal dots and hyphens (. and -). The passthrough strategy leaves the key as is. Can be used for JMS brokers which do not care whether JMS header keys contain illegal characters. You can provide your own implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy and refer to it using the # notation. One of: [default] [passthrough]

null

MEDIUM

camel.sink.endpoint.mapJmsMessage

Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.

true

MEDIUM

camel.sink.endpoint.maxMessagesPerTask

The number of messages per task. -1 is unlimited. If you use a range for concurrent consumers (eg min max), then this option can be used to set a value to eg 100 to control how fast the consumers will shrink when less work is required.

-1

MEDIUM

camel.sink.endpoint.messageConverter

To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message.

null

MEDIUM

camel.sink.endpoint.messageCreatedStrategy

To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message.

null

MEDIUM

camel.sink.endpoint.messageIdEnabled

When sending, specifies whether message IDs should be added. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value.

true

MEDIUM

camel.sink.endpoint.messageListenerContainer Factory

Registry ID of the MessageListenerContainerFactory used to determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use to consume messages. Setting this will automatically set consumerType to Custom.

null

MEDIUM

camel.sink.endpoint.messageTimestampEnabled

Specifies whether timestamps should be enabled by default on sending messages. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint the timestamp must be set to its normal value.

true

MEDIUM

camel.sink.endpoint.pubSubNoLocal

Specifies whether to inhibit the delivery of messages published by its own connection.

false

MEDIUM

camel.sink.endpoint.receiveTimeout

The timeout for receiving messages (in milliseconds).

1000L

MEDIUM

camel.sink.endpoint.recoveryInterval

Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.

5000L

MEDIUM

camel.sink.endpoint.requestTimeoutCheckerInterval

Configures how often Camel should check for timed out Exchanges when doing request/reply over JMS. By default Camel checks once per second. But if you must react faster when a timeout occurs, then you can lower this interval, to check more frequently. The timeout is determined by the option requestTimeout.

1000L

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.transferException

If enabled and you are using Request Reply messaging (InOut) and an Exchange failed on the consumer side, then the caused Exception will be send back in response as a javax.jms.ObjectMessage. If the client is Camel, the returned Exception is rethrown. This allows you to use Camel JMS as a bridge in your routing - for example, using persistent queues to enable robust routing. Notice that if you also have transferExchange enabled, this option takes precedence. The caught exception is required to be serializable. The original Exception on the consumer side can be wrapped in an outer exception such as org.apache.camel.RuntimeCamelException when returned to the producer. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer!

false

MEDIUM

camel.sink.endpoint.transferExchange

You can transfer the exchange over the wire instead of just the body and headers. The following fields are transferred: In body, Out body, Fault body, In headers, Out headers, Fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. You must enable this option on both the producer and consumer side, so Camel knows the payloads is an Exchange and not a regular payload. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer having to use compatible Camel versions!

false

MEDIUM

camel.sink.endpoint.useMessageIDAsCorrelationID

Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.

false

MEDIUM

camel.sink.endpoint.waitForProvisionCorrelationTo BeUpdatedCounter

Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.

50

MEDIUM

camel.sink.endpoint.waitForProvisionCorrelationTo BeUpdatedThreadSleepingTime

Interval in millis to sleep each time while waiting for provisional correlation id to be updated.

100L

MEDIUM

camel.sink.endpoint.password

Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

MEDIUM

camel.sink.endpoint.username

Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

MEDIUM

camel.sink.endpoint.transacted

Specifies whether to use transacted mode

false

MEDIUM

camel.sink.endpoint.transactedInOut

Specifies whether InOut operations (request reply) default to using transacted mode If this flag is set to true, then Spring JmsTemplate will have sessionTransacted set to true, and the acknowledgeMode as transacted on the JmsTemplate used for InOut operations. Note from Spring JMS: that within a JTA transaction, the parameters passed to createQueue, createTopic methods are not taken into account. Depending on the Java EE transaction context, the container makes its own decisions on these values. Analogously, these parameters are not taken into account within a locally managed transaction either, since Spring JMS operates on an existing JMS Session in this case. Setting this flag to true will use a short local JMS transaction when running outside of a managed transaction, and a synchronized local JMS transaction in case of a managed transaction (other than an XA transaction) being present. This has the effect of a local JMS transaction being managed alongside the main transaction (which might be a native JDBC transaction), with the JMS transaction committing right after the main transaction.

false

MEDIUM

camel.sink.endpoint.lazyCreateTransactionManager

If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.

true

MEDIUM

camel.sink.endpoint.transactionManager

The Spring transaction manager to use.

null

MEDIUM

camel.sink.endpoint.transactionName

The name of the transaction to use.

null

MEDIUM

camel.sink.endpoint.transactionTimeout

The timeout value of the transaction (in seconds), if using transacted mode.

-1

MEDIUM

camel.component.jms.clientId

Sets the JMS client ID to use. Note that this value, if specified, must be unique and can only be used by a single JMS connection instance. It is typically only required for durable topic subscriptions. If using Apache ActiveMQ you may prefer to use Virtual Topics instead.

null

MEDIUM

camel.component.jms.connectionFactory

The connection factory to be use. A connection factory must be configured either on the component or endpoint.

null

MEDIUM

camel.component.jms.disableReplyTo

Specifies whether Camel ignores the JMSReplyTo header in messages. If true, Camel does not send a reply back to the destination specified in the JMSReplyTo header. You can use this option if you want Camel to consume from a route and you do not want Camel to automatically send back a reply message because another component in your code handles the reply message. You can also use this option if you want to use Camel as a proxy between different message brokers and you want to route message from one system to another.

false

MEDIUM

camel.component.jms.durableSubscriptionName

The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.

null

MEDIUM

camel.component.jms.jmsMessageType

Allows you to force the use of a specific javax.jms.Message implementation for sending JMS messages. Possible values are: Bytes, Map, Object, Stream, Text. By default, Camel would determine which JMS message type to use from the In body type. This option allows you to specify it. One of: [Bytes] [Map] [Object] [Stream] [Text]

null

MEDIUM

camel.component.jms.testConnectionOnStartup

Specifies whether to test the connection on startup. This ensures that when Camel starts that all the JMS consumers have a valid connection to the JMS broker. If a connection cannot be granted then Camel throws an exception on startup. This ensures that Camel is not started with failed connections. The JMS producers is tested as well.

false

MEDIUM

camel.component.jms.deliveryDelay

Sets delivery delay to use for send calls for JMS. This option requires JMS 2.0 compliant broker.

-1L

MEDIUM

camel.component.jms.deliveryMode

Specifies the delivery mode to be used. Possibles values are those defined by javax.jms.DeliveryMode. NON_PERSISTENT = 1 and PERSISTENT = 2. One of: [1] [2]

null

MEDIUM

camel.component.jms.deliveryPersistent

Specifies whether persistent delivery is used by default.

true

MEDIUM

camel.component.jms.explicitQosEnabled

Set if the deliveryMode, priority or timeToLive qualities of service should be used when sending messages. This option is based on Spring’s JmsTemplate. The deliveryMode, priority and timeToLive options are applied to the current endpoint. This contrasts with the preserveMessageQos option, which operates at message granularity, reading QoS properties exclusively from the Camel In message headers.

"false"

MEDIUM

camel.component.jms.formatDateHeadersToIso8601

Sets whether JMS date properties should be formatted according to the ISO 8601 standard.

false

MEDIUM

camel.component.jms.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.component.jms.preserveMessageQos

Set to true, if you want to send message using the QoS settings specified on the message, instead of the QoS settings on the JMS endpoint. The following three headers are considered JMSPriority, JMSDeliveryMode, and JMSExpiration. You can provide all or only some of them. If not provided, Camel will fall back to use the values from the endpoint instead. So, when using this option, the headers override the values from the endpoint. The explicitQosEnabled option, by contrast, will only use options set on the endpoint, and not values from the message header.

false

MEDIUM

camel.component.jms.priority

Values greater than 1 specify the message priority when sending (where 0 is the lowest priority and 9 is the highest). The explicitQosEnabled option must also be enabled in order for this option to have any effect. One of: [1] [2] [3] [4] [5] [6] [7] [8] [9]

4

MEDIUM

camel.component.jms.replyToConcurrentConsumers

Specifies the default number of concurrent consumers when doing request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

1

MEDIUM

camel.component.jms.replyToMaxConcurrentConsumers

Specifies the maximum number of concurrent consumers when using request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

null

MEDIUM

camel.component.jms.replyToOnTimeoutMaxConcurrent Consumers

Specifies the maximum number of concurrent consumers for continue routing when timeout occurred when using request/reply over JMS.

1

MEDIUM

camel.component.jms.replyToOverride

Provides an explicit ReplyTo destination in the JMS message, which overrides the setting of replyTo. It is useful if you want to forward the message to a remote Queue and receive the reply message from the ReplyTo destination.

null

MEDIUM

camel.component.jms.replyToType

Allows for explicitly specifying which kind of strategy to use for replyTo queues when doing request/reply over JMS. Possible values are: Temporary, Shared, or Exclusive. By default Camel will use temporary queues. However if replyTo has been configured, then Shared is used by default. This option allows you to use exclusive queues instead of shared ones. See Camel JMS documentation for more details, and especially the notes about the implications if running in a clustered environment, and the fact that Shared reply queues has lower performance than its alternatives Temporary and Exclusive. One of: [Temporary] [Shared] [Exclusive]

null

MEDIUM

camel.component.jms.requestTimeout

The timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds). The default is 20 seconds. You can include the header CamelJmsRequestTimeout to override this endpoint configured timeout value, and thus have per message individual timeout values. See also the requestTimeoutCheckerInterval option.

20000L

MEDIUM

camel.component.jms.timeToLive

When sending messages, specifies the time-to-live of the message (in milliseconds).

-1L

MEDIUM

camel.component.jms.allowAdditionalHeaders

This option is used to allow additional headers which may have values that are invalid according to JMS specification. For example some message systems such as WMQ do this with header names using prefix JMS_IBM_MQMD_ containing values with byte array or other invalid types. You can specify multiple header names separated by comma, and use as suffix for wildcard matching.

null

MEDIUM

camel.component.jms.allowNullBody

Whether to allow sending messages with no body. If this option is false and the message body is null, then an JMSException is thrown.

true

MEDIUM

camel.component.jms.alwaysCopyMessage

If true, Camel will always make a JMS message copy of the message when it is passed to the producer for sending. Copying the message is needed in some situations, such as when a replyToDestinationSelectorName is set (incidentally, Camel will set the alwaysCopyMessage option to true, if a replyToDestinationSelectorName is set)

false

MEDIUM

camel.component.jms.correlationProperty

When using InOut exchange pattern use this JMS property instead of JMSCorrelationID JMS property to correlate messages. If set messages will be correlated solely on the value of this property JMSCorrelationID property will be ignored and not set by Camel.

null

MEDIUM

camel.component.jms.disableTimeToLive

Use this option to force disabling time to live. For example when you do request/reply over JMS, then Camel will by default use the requestTimeout value as time to live on the message being sent. The problem is that the sender and receiver systems have to have their clocks synchronized, so they are in sync. This is not always so easy to archive. So you can use disableTimeToLive=true to not set a time to live value on the sent message. Then the message will not expire on the receiver system. See below in section About time to live for more details.

false

MEDIUM

camel.component.jms.forceSendOriginalMessage

When using mapJmsMessage=false Camel will create a new JMS message to send to a new JMS destination if you touch the headers (get or set) during the route. Set this option to true to force Camel to send the original JMS message that was received.

false

MEDIUM

camel.component.jms.includeSentJMSMessageID

Only applicable when sending to JMS destination using InOnly (eg fire and forget). Enabling this option will enrich the Camel Exchange with the actual JMSMessageID that was used by the JMS client when the message was sent to the JMS destination.

false

MEDIUM

camel.component.jms.replyToCacheLevelName

Sets the cache level by name for the reply consumer when doing request/reply over JMS. This option only applies when using fixed reply queues (not temporary). Camel will by default use: CACHE_CONSUMER for exclusive or shared w/ replyToSelectorName. And CACHE_SESSION for shared without replyToSelectorName. Some JMS brokers such as IBM WebSphere may require to set the replyToCacheLevelName=CACHE_NONE to work. Note: If using temporary queues then CACHE_NONE is not allowed, and you must use a higher value such as CACHE_CONSUMER or CACHE_SESSION. One of: [CACHE_AUTO] [CACHE_CONNECTION] [CACHE_CONSUMER] [CACHE_NONE] [CACHE_SESSION]

null

MEDIUM

camel.component.jms.replyToDestinationSelectorName

Sets the JMS Selector using the fixed name to be used so you can filter out your own replies from the others when using a shared queue (that is, if you are not using a temporary reply queue).

null

MEDIUM

camel.component.jms.streamMessageTypeEnabled

Sets whether StreamMessage type is enabled or not. Message payloads of streaming kind such as files, InputStream, etc will either by sent as BytesMessage or StreamMessage. This option controls which kind will be used. By default BytesMessage is used which enforces the entire message payload to be read into memory. By enabling this option the message payload is read into memory in chunks and each chunk is then written to the StreamMessage until no more data.

false

MEDIUM

camel.component.jms.allowAutoWiredConnection Factory

Whether to auto-discover ConnectionFactory from the registry, if no connection factory has been configured. If only one instance of ConnectionFactory is found then it will be used. This is enabled by default.

true

MEDIUM

camel.component.jms.allowAutoWiredDestination Resolver

Whether to auto-discover DestinationResolver from the registry, if no destination resolver has been configured. If only one instance of DestinationResolver is found then it will be used. This is enabled by default.

true

MEDIUM

camel.component.jms.allowSerializedHeaders

Controls whether or not to include serialized headers. Applies only when transferExchange is true. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.component.jms.artemisStreamingEnabled

Whether optimizing for Apache Artemis streaming mode.

true

MEDIUM

camel.component.jms.asyncStartListener

Whether to startup the JmsConsumer message listener asynchronously, when starting a route. For example if a JmsConsumer cannot get a connection to a remote JMS broker, then it may block while retrying and/or failover. This will cause Camel to block while starting routes. By setting this option to true, you will let routes startup, while the JmsConsumer connects to the JMS broker using a dedicated thread in asynchronous mode. If this option is used, then beware that if the connection could not be established, then an exception is logged at WARN level, and the consumer will not be able to receive messages; You can then restart the route to retry.

false

MEDIUM

camel.component.jms.asyncStopListener

Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.

false

MEDIUM

camel.component.jms.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.jms.configuration

To use a shared JMS configuration

null

MEDIUM

camel.component.jms.destinationResolver

A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry).

null

MEDIUM

camel.component.jms.errorHandler

Specifies a org.springframework.util.ErrorHandler to be invoked in case of any uncaught exceptions thrown while processing a Message. By default these exceptions will be logged at the WARN level, if no errorHandler has been configured. You can configure logging level and whether stack traces should be logged using errorHandlerLoggingLevel and errorHandlerLogStackTrace options. This makes it much easier to configure, than having to code a custom errorHandler.

null

MEDIUM

camel.component.jms.exceptionListener

Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions.

null

MEDIUM

camel.component.jms.idleConsumerLimit

Specify the limit for the number of consumers that are allowed to be idle at any given time.

1

MEDIUM

camel.component.jms.idleTaskExecutionLimit

Specifies the limit for idle executions of a receive task, not having received any message within its execution. If this limit is reached, the task will shut down and leave receiving to other executing tasks (in the case of dynamic scheduling; see the maxConcurrentConsumers setting). There is additional doc available from Spring.

1

MEDIUM

camel.component.jms.includeAllJMSXProperties

Whether to include all JMSXxxx properties when mapping from JMS to Camel Message. Setting this to true will include properties such as JMSXAppID, and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy then this option does not apply.

false

MEDIUM

camel.component.jms.jmsKeyFormatStrategy

Pluggable strategy for encoding and decoding JMS keys so they can be compliant with the JMS specification. Camel provides two implementations out of the box: default and passthrough. The default strategy will safely marshal dots and hyphens (. and -). The passthrough strategy leaves the key as is. Can be used for JMS brokers which do not care whether JMS header keys contain illegal characters. You can provide your own implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy and refer to it using the # notation. One of: [default] [passthrough]

null

MEDIUM

camel.component.jms.mapJmsMessage

Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.

true

MEDIUM

camel.component.jms.maxMessagesPerTask

The number of messages per task. -1 is unlimited. If you use a range for concurrent consumers (eg min max), then this option can be used to set a value to eg 100 to control how fast the consumers will shrink when less work is required.

-1

MEDIUM

camel.component.jms.messageConverter

To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message.

null

MEDIUM

camel.component.jms.messageCreatedStrategy

To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message.

null

MEDIUM

camel.component.jms.messageIdEnabled

When sending, specifies whether message IDs should be added. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value.

true

MEDIUM

camel.component.jms.messageListenerContainer Factory

Registry ID of the MessageListenerContainerFactory used to determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use to consume messages. Setting this will automatically set consumerType to Custom.

null

MEDIUM

camel.component.jms.messageTimestampEnabled

Specifies whether timestamps should be enabled by default on sending messages. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint the timestamp must be set to its normal value.

true

MEDIUM

camel.component.jms.pubSubNoLocal

Specifies whether to inhibit the delivery of messages published by its own connection.

false

MEDIUM

camel.component.jms.queueBrowseStrategy

To use a custom QueueBrowseStrategy when browsing queues

null

MEDIUM

camel.component.jms.receiveTimeout

The timeout for receiving messages (in milliseconds).

1000L

MEDIUM

camel.component.jms.recoveryInterval

Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.

5000L

MEDIUM

camel.component.jms.requestTimeoutCheckerInterval

Configures how often Camel should check for timed out Exchanges when doing request/reply over JMS. By default Camel checks once per second. But if you must react faster when a timeout occurs, then you can lower this interval, to check more frequently. The timeout is determined by the option requestTimeout.

1000L

MEDIUM

camel.component.jms.transferException

If enabled and you are using Request Reply messaging (InOut) and an Exchange failed on the consumer side, then the caused Exception will be send back in response as a javax.jms.ObjectMessage. If the client is Camel, the returned Exception is rethrown. This allows you to use Camel JMS as a bridge in your routing - for example, using persistent queues to enable robust routing. Notice that if you also have transferExchange enabled, this option takes precedence. The caught exception is required to be serializable. The original Exception on the consumer side can be wrapped in an outer exception such as org.apache.camel.RuntimeCamelException when returned to the producer. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer!

false

MEDIUM

camel.component.jms.transferExchange

You can transfer the exchange over the wire instead of just the body and headers. The following fields are transferred: In body, Out body, Fault body, In headers, Out headers, Fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. You must enable this option on both the producer and consumer side, so Camel knows the payloads is an Exchange and not a regular payload. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer having to use compatible Camel versions!

false

MEDIUM

camel.component.jms.useMessageIDAsCorrelationID

Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.

false

MEDIUM

camel.component.jms.waitForProvisionCorrelationTo BeUpdatedCounter

Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.

50

MEDIUM

camel.component.jms.waitForProvisionCorrelationTo BeUpdatedThreadSleepingTime

Interval in millis to sleep each time while waiting for provisional correlation id to be updated.

100L

MEDIUM

camel.component.jms.headerFilterStrategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

null

MEDIUM

camel.component.jms.password

Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

MEDIUM

camel.component.jms.username

Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

MEDIUM

camel.component.jms.transacted

Specifies whether to use transacted mode

false

MEDIUM

camel.component.jms.transactedInOut

Specifies whether InOut operations (request reply) default to using transacted mode If this flag is set to true, then Spring JmsTemplate will have sessionTransacted set to true, and the acknowledgeMode as transacted on the JmsTemplate used for InOut operations. Note from Spring JMS: that within a JTA transaction, the parameters passed to createQueue, createTopic methods are not taken into account. Depending on the Java EE transaction context, the container makes its own decisions on these values. Analogously, these parameters are not taken into account within a locally managed transaction either, since Spring JMS operates on an existing JMS Session in this case. Setting this flag to true will use a short local JMS transaction when running outside of a managed transaction, and a synchronized local JMS transaction in case of a managed transaction (other than an XA transaction) being present. This has the effect of a local JMS transaction being managed alongside the main transaction (which might be a native JDBC transaction), with the JMS transaction committing right after the main transaction.

false

MEDIUM

camel.component.jms.lazyCreateTransactionManager

If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.

true

MEDIUM

camel.component.jms.transactionManager

The Spring transaction manager to use.

null

MEDIUM

camel.component.jms.transactionName

The name of the transaction to use.

null

MEDIUM

camel.component.jms.transactionTimeout

The timeout value of the transaction (in seconds), if using transacted mode.

-1

MEDIUM

The camel-jms sink connector has no converters out of the box.

The camel-jms sink connector has no transforms out of the box.

The camel-jms sink connector has no aggregation strategies out of the box.